Bowflex Xtreme 2 SE Owner's Manual
®
Bowflex Xtreme® 2 SE Home Gym
Assembly Manual
®
Congratulations on your commitment to fitness and your purchase of the Bowflex Xtreme® 2 SE home
gym. Before assembling your Bowflex Xtreme® 2 SE home gym please read the Assembly Manual and
follow the Important Safety Precautions. For information on how to use your Bowflex Xtreme® 2 SE home
gym, refer to the Bowflex Xtreme® 2 SE Owner’s Manual.
Table of Contents
Important Safety Instructions .........................1
Before Assembly ...................................1
Parts ................................................2
Hardware ..........................................4
Assembly Guide .....................................5
Cable & Pulley Routing ............................15
Nautilus, Inc., www.NautilusInc.com - Customer Service: technics@nautilus.com | Printed in China | © 2008 Nautilus, Inc.,
Important Safety Instructions
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Before using this equipment, obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly Manual.
• Keep bystanders and children away from the product you are assembling at all times.
• Do not assemble this machine outdoors or in a wet or moist location.
• Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly
steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
• Set up this machine on a solid, level, horizontal surface.
• Do not try to change the design or functionality of this machine. This could compromise the safety of this
machine and will void the warranty.
• If replacement parts are necessary use only genuine replacement parts and hardware supplied by Nautilus.
Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly
and void the warranty.
• Do not use until the machine has been fully assembled and inspected for correct performance in accordance
with the Owner’s Manual.
• Read and understand the complete Owner’s Manual supplied with this machine before first use. Keep the
Owner’s and Assembly Manuals for future reference.
• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must
be on a hard, level surface.
Select a workout area that provides a minimum clearance behind the rod box of 0.5 ft (15 cm) and a total width of
6.5 ft (2.0 m). Allow a minimum of 3.0 ft (0.9 m) free space in front of the machine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1. To make the assembly process go faster, gather the pieces you need for each step and thoroughly read the assembly
instructions for that step before starting assembly for the step.
2. When tightening a locknut on a bolt, use a combination wrench to grip the locknut and make sure that it is fastened
securely.
3. When attaching two pieces, gently lift and look through the bolt holes to help guide the bolt through the holes.
®
4. As a general rule, and for all bolts and nuts on your Bowflex Xtreme
right (clockwise) to tighten and left (counterclockwise) to loosen.
2 SE home gym, turn bolts or nuts toward the
Bowflex Xtreme® 2 SE Assembly Manual
1
Parts
27
IMPORTANT: LEAVE ALL CABLES COILED AND WRAPPED UNTIL YOUR
27
26
18
BOWFLEX
17
16
XTREME® 2 SE HOME GYM IS FULLY ASSEMBLED.
10
8
14
12
N
D
M
15
8
O
P
E
L
5
B
4
6
K
E
E
B
H
8
?
J
O
B
B
G
K
C
C
N
20
11
21
21
B
I
3
O
B
B
R
Q
19
O
I
B
A
F
9
2
B
22
13
14
N
D
25
23
25
26
2
Bowflex Xtreme® 2 SE Assembly Manual
Q
B
B
O
7
24
1
Note: Cables are not shown for clarity.
Parts
Item Qty Description Item Qty Description
1 1 Base Frame Assembly 16 1 Lock Knob
2 1 Bfx Rod Pack 210# 17 1 Seat Backbone Assembly
3 1 Lower Lat Tower 18 1 Seat Bottom
4 1 Seat Support Rail 19 1 Ab Crunch Crossbar
5 1 Squat Frame Left 20 1 Ab Crunch Bracket
6 1 Squat Frame Right 21 2 Pulley, Pair Floating
7 1 Squat Platform 22 1 Lat Double Pulley / Housing
8 4 Pulley Slider, 4” w/o Decal 23 1 Leg Extension Backbone
9 1 Rear Lat Crossmember 24 1 Leg Extension Pin
10 1 Lat Cross Bar Assembly 25 2 Tube, Foam Roller
11 1 Upper Lat Tower Tube 26 4 Pad, Foam Roller
12 1 Pulley Arm Assembly, Right 27 4 End Cap 3/4”
13 1 Pulley Arm Assembly, Left 28 1 Rod Cables Assembly, Pair
14 2 Pulley Slider, 4” w/ Decal 29 1 Squat Cables Assembly, Pair
15 1 Seat Back Pad
Tools
Included Not Included (recommended)
3/16”
7/32”
5/16”
• 7/16" Combination Wrench
• 9/16" Combination Wrench
• Adjustable Wrench
• Socket Wrench Set
• Phillips Screw Driver
• Flat Blade Screw Driver
• Rubber Mallet
• Utility Knife
• Scissors
Bowflex Xtreme® 2 SE Assembly Manual
3
(NOTE: Drawings not to scale.)
Hardware
C D
E
FA B
IH
KG J
S
L O
N
M
Item Qty Description Item Qty Description
A 3 Flat Washer 1/4” Regular K 2 Button Head Screw 5/16” X 2 1/2”
B 31 Flat Washer 3/8” Regular L 4 Button Head Screw 5/16” X 3/4”
C 4 Flat Washer 1/2” Wide M 2 Threaded Stud 1/2” X 9 1/2”
D 4 Flat Washer 1/2” Regular N 6 Nylock Nut 1/2”
E 6 Flat Washer 5/16” Regular O 11 Nylock Nut 3/8”
F 3 Phillips Screw #10-16 X 1” P 1 Seat Locking Pin
G 2 Button Head Screw 3/8” X 3” Q 6 Button Head Screw 3/8” X 2 3/4”
H 1 Button Head Screw 3/8” X 5” R 2 Hex Head Bolt 3/8” X 3 1/4”
I 9 Button Head Screw 3/8” X 3/4” S 4 Cable End Stop Ball
J 2 Button Head Screw 1/2” X 5 1/4” T 6 Snaphook
P
Q
R
T
4
Bowflex Xtreme® 2 SE Assembly Manual
Assembly Guide
Step 1 Install Power Rod® Pack to Lower Lat Tower Assembly
Parts:
• Lower Lat Tower (3)
• Rod Box with Power Rod
Hardware:
• 3 Phillips Screws #10 X 1” (F)
• 3 Flat Washers 1/4”(A)
®
Pack (2)
3
Tool: Phillips Screw Driver
1-1
Lay parts on floor as shown. Firmly slide
Rod Box into Lower Lat Tower frame.
1-2 Fasten the Rod Box to the
Lower Lat Tower frame as shown.
Tighten screws until snug.
Step 2 Install Lower Lat Tower Assembly
Parts:
2
A
F
• Lower Lat Tower Assembly
• Base Frame Assembly (1)
Hardware:
• 2 Hex Head Bolts 3/8” X 3 1/4” (R)
• 4 Flat Washers 3/8” (B)
• 2 Nylock Nuts 3/8” (O)
Tool: 7/32” Hex Wrench
2-1 Align the Lower Lat Tower Assembly
over the Base Frame.
2-2 Secure Lower Lat Tower Assembly
using screws and washers as shown.
Finger tighten screws at this time.
B
O
1
B
R
?
Bowflex Xtreme® 2 SE Assembly Manual
5
Step 3 Install Seat Support Rail
Parts:
• Seat Support Rail (4)
• Base Frame Assembly
Assembly Guide
Hardware:
• 2 Button Head Screws 3/8” X 3/4” (I)
• 2 Flat Washers 3/8” (B)
Tool: 7/32” Hex Wrench
3-1
Slide the bottom of the Seat Support Rail onto
the Base Frame connector as shown.
3-2 Slide the top of the Seat Support Rail onto
the Lower Lat Tower Assembly connector as
shown. Secure using screws and washers as
shown.
Finger tighten screws at this time.
4
I
B
6
Bowflex Xtreme® 2 SE Assembly Manual
Loading...