Boss mr1420s User Manual

10 R - 02 1397

1. BUTTONS LOCATION AND FUNCTIONS

6 11

413

1. Panel Release Button

2. Mute Button

3. CD Eject Button

4. Audio Button

5. Display Button / ID3 Information Button

6. Local / Distant Button

7. Preset Memory Buttons

8. Mono / Stereo Button

9. Scan Button

10. Volume Knob

11. MP3 Menu Button & Automatically Store / Preset Scan Button

12. Power Button

13. Band/Loudness Button / MP3 Enter Button

14. Tuning Up/Down & Track Up / Down Buttons

15. Source Button

16. Preset Equalizer Button

17. Folder Down / Up Buttons

18. Aux In Jack

1. Entriegel-Taste Bedienteil

2. Stumm-Taste

3. CD-Auswurftaste

4. Audio-Taste

5. Display-/ ID3-Taste

6. Local / Distant-Taste

7. Senderspeichertasten

8. Mono / Stereo-Taste

9. Scan- Taste

10. Lautstärkenregler

11. AMS Taste / MP3 Suchlauf Taste

12. Einschalt-Taste

13. Frequenzband-Taste / MP3 Eingabe-Taste

14. Titel AUF / AB - Taste

15. Source-Taste

16. PEQ-Taste

17. Folder Down / Up - Taste

18. Front-Audio-Anschluss

1. Tecla para remover o painel frontal

2. Tecla Mute

3. Tecla para ejetar o disco

4. Tecla de ajuste de audio

5. Tecla Display / informação MP3-iD3

6. Tecla Local/Distante

7. Teclas de memória de estações

8. Tecla estéreo/mono

9. Tecla Scan

10. Controle de volume

11. Tecla Menu e memorização automática (As) / Preset Scan (Ps)

12. Tecla Ligar/desligar

13. Tecla Banda / Loudness / MP3 Enter

14. Teclas de sintonização de estações / mudança de faixas de música

15. Tecla Source

16. Tecla Equalizador pré-programado

17. Tecla Seleção de pastas

18. Entrada Auxiliar

1. Extracción del panel frontal

2. Mute / silenciamiento de sonido instantaneo.

3. Apertura del panel motorizado y expulsión del disco

4. Tecla Audio

5. Selección información Display/ID3 TAG muestra

6. Botón Distancia/Local

7. Botones de estaciones memorizadas

8. Botón selección mono/estéreo

9. Botón De Búsqueda

10. Botón De Volumen

11. Menú del Sistema de Memorización Automática de emisoras / selección de memorias

12. Encendido/Apagado

13. Selector Bandas / Bajos/MP3

14. Botón de selección de emisoras & banda de música

15. Selección modos Radio/CD/Entrada auxiliar

16.Tecla de ecualización

17.Botón de selección de carpeta/folder

18. Entrada de auxiliar

1. Bouton De Déclenchement Du Panneau

2. Bouton D'assourdissement

3. Bouton Éjection D'un Cd

4. Bouton De Sélection Audio / Entrée De MP3

5. Bouton D'écran / Affichage D'information Sur Les Disques MP3

6. Bouton Local/distant

7. Boutons Des Stations Préréglées (m1 ~m6)

8. Bouton De La Stéréo Du Mono

9. Bouton Du Scanner

10. Bouton De Volume

11. Bouton De Menu & Bouton De Stockage Des Stations Dans La Mémoire

12. Bouton D'alimentation

13. Bouton De Bande / Entrée De MP3

14. Bouton De Recherche Des Stations/pistes : En Avant / En Arrière

15. Bouton De Régime

16. Bouton De PEQ

17.Dossier En Le Bouton/ Vers Le Haut Le Bouton

18. Aux A Jack

1. Tasto Rilascio Frontalino

2. Tasto Mute

3. Tasto Eject

4. Audio Controlla

5. Tasto Display/ID3 (informazioni)

6. Bottone Distante Locale

7. Tasti Stazioni Memorie Preimpostate

8. Bottone di Stereo/Mono

9. Tasto Scan

10. Tasto Volume

11. Tasto Menu & AS/PS

12. Tasto Power

13. Tasto Banda/Forte & Enter MP3

14. Tasto sintonizzazione su/gui & traccia su/gui

15. Tasto Mode

16. Bottone di equilizzatore preprogrammato

17. Bottone di Cartella su/gui

18. Entrada Aux

2. HANDLING COMPACT DISCS

MOISTURE CONDENSATION

On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated.

NOTES ON CDs

A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. Handle the disc by its edge. To keep the disc clean, do not touch the surface (P.1).

P. 1

Do not stick paper or tape on the disc (P.2).

P. 2

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where there can be a considerable rise in temperature inside the car (P.3).

P. 3

Before playing, clean the discs with an optional cleaning cloth. Wipe each disc from the center out (P.4).

NOTES ON DISCS

If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs.

Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers).

There are paste residue. Ink is sticky (P.5).

P. 5

Do not use CDs with old labels that are beginning to peel off.

Stickers that are beginning to peel away, leaving a sticky residue (P.6).

P. 6

Do not use your CDs with labels or stickers attached.

Labels are attached (P.7).

Do Not Use Special Shape CDs

P. 7

Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction.(P.8).

P. 8

Be sure to use CDs with disc mark

*******

**************

*******

****

*******

P. 4

Do not use solvents such as benzine,

thinner,commercially available cleaners, or antistatic spray intended for analog discs.

RECORDABLE

REWRITABLE

Only for this unit. CD-Rs and CD-RWs which have not undergone

finalization processing cannot be played. (For more information on finalization processing, refer to the manual for your CD-R/CD-RW writing software or CD-R/CD-RW recorder.) Additionally, depending on the recording status, it may prove impossible to play certain CDs record on CD-R or CD-RW.

3. INSTALLATION

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop. If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.

30°

Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from heater, or where it would be subject to dust dirt or excessive vibration. Be sure to remove the front panel before installing the unit.

DIN FRONT/REAR-MOUNT

This unit can be property installed either from “Front” (conventional DIN Front-mount) or “Rear”(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods A and B.

DIN FRONT-MOUNT (Method A)

Installation the unit

182

1. Dashboard

2. Holder After inserting the half sleeve into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place.

3. Screw

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (5x15mm)

5. Screw

6. Support Strap Be sure to use the support strap to secure the

back of the unit in place. The strap can be bent by hand to the desired angle.

7. Plain washer

Removing the unit

Trim Plate Installation:

Push the trim plate against the chassis until it is fitted. You must do this before you install the front panel, otherwise it can't be attached.

DIN REAR-MOUNT (METHOD B)

Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket.

a. Frame b. Insert fingers into the groove in the front

of frame and pull out to remove the frame. (When re-attaching the frame, point the side with a groove down wards and attach it.)

c. Insert the levers supplied with the unit

into the grooves at both sides of the unit as shown in figure until they click. Pulling the levers makes it possible to remove the unit from the dashboard.

1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side.

2. Screw

3. Factory radio mounting bracket.

4. Dashboard or Console

5. Hook (Remove this part)

Note: the mounting box, outer trim ring, and half-sleeve are not used for method B installation.

+ 10 hidden pages