Boss MR1400W, MR1400S User Manual

1. BUTTONS LOCATION AND FUNCTIONS

8611

1. Panel ReleaseButton

2. Mute Button

3. CD EjectButton

4. Audio Button

5. Display Button

6. Local /Distant Button

7. Preset MemoryButtons

8. Mono /Stereo Button

9. Scan Button

10. Volume Knob

11. AutomaticallyStore / PresetScan Button

12. PowerButton

13. Band/LoudnessButton

14. Tuning Up/Down& Track Up/ DownButtons

15. RemoteControl Receiver

16. SourceButton

17. PresetEqualizer Button

18. AuxIn Jack

413 5

216

1.Teclapara removero painelfrontal

2.TeclaMute

3.Teclapara ejetaro disco

4.Teclade ajustede audio

5.TeclaDisplay

6.TeclaLocal/Distante

7.Teclasde memóriade estações

8.Teclaestéreo/mono

9.TeclaScan

10.Controle devolume

11.Teclaautomática (As)/ PresetScan(Ps)

12.TeclaLigar/desligar

13.TeclaBanda /Loudness

14.Teclasde sintonizaçãode estações/

15.Sensor docontrole remoto

16.TeclaSource

17.TeclaEqualizador pré-programado

18.Entrada Auxiliar

mudançade faixasde música

1. Entriegel-TasteBedienteil

2. Stumm-Taste

3. CD-Auswurftaste

4. Audio-Taste

5. Display-Taste

6. Local/ Distant-Taste

7. Senderspeichertasten

8. Mono/ Stereo-Taste

9. Scan-Taste

10. Lautstärkenregler

11. AMSTaste

12. Einschalt-Taste

13. Frequenzband-Taste

14. TitelAUF / AB- Taste

15. Fernbedienungs-Taste

16. Source-Taste

17. PEQ-Taste

18. Front-Audio-Anschluss

1. BoutonDe DéclenchementDu Panneau

2. BoutonD'assourdissement

3. BoutonÉjection D'unCd

4. BoutonDe SélectionAudio

5. BoutonD'écran /Affichage D'information

6. BoutonLocal/distant

7. BoutonsDes StationsPréréglées (m1~m6)

8. BoutonDe LaStéréo DuMono

9. BoutonDu Scanner

10.BoutonDeVolume

11.BoutonDeStockageDesStationsDans La Mémoire

12.BoutonD'alimentation

13.BoutonDeBande

14.BoutonDeRechercheDesStations/pistes: En Avant/EnArrière

15.RécepteurDeLaCommandeÀDistance

16.BoutonDeRégime

17.BoutonDePEQ

18.AuxAJack

1. Extraccióndel panel frontal

2. Silenciamientorápido

3. Aperturadel panel motorizadoy expulsióndel disco

4. Tecla Audio

5. Seleccióninformación Display

6. BotónDistancia/Local

7. Botonesde estaciones memorizadas

8. Botónselección mono/estéreo

9. BotónDe Búsqueda

10. BotónDe Volumen

11. Automáticade emisoras/ selecciónde memorias

12. Encendido/Apagado

13. SelectorBandas

14. Botónde selección deemisoras &banda demúsica

15. Receptorde control remoto

16. Selecciónmodos Radio/CD/Entrada auxiliar

17. Tecla de ecualización

18. Entradade auxiliar

1. Tasto Rilascio Frontalino

2. Tasto Mute

3. Tasto Eject

4. AudioControlla

5. Tasto Display

6. BottoneDistante Locale

7. Tasti Stazioni MemoriePreimpostate

8. Bottonedi Stereo/Mono

9. Tasto Scan

10. Tasto Volume

11. Tasto AS/PS

12. Tasto Power

13. Tasto Banda/Forte

14. Tasto sintonizzazione su/gui& tracciasu/gui

15. Destinatariodi controllo remoto

16. Tasto Mode

17. Bottonedi equilizzatore preprogrammato

18. EntradaAux

2. HANDLING COMPACT DISCS

MOISTURE CONDENSATION

On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture hasevaporated.

NOTES ON CDs

A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle thedisc as follows. Handle the disc by its edge. To keep the disc clean, do nottouch the surface(P.1).

P. 1

Do not stickpaper or tapeon thedisc (P.2).

P. 2

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where there can be a considerable rise in temperature inside thecar (P.3).

P. 3

Before playing, clean the discs with an optional cleaning cloth. Wipe each disc from the center out(P.4).

NOTES ON DISCS

If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunctionor ruin yourdiscs.

Do not usesecond-hand or rental CDsthat have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under thestickers).

There are paste residue. Ink is sticky (P.5).

P. 5

Do not use CDs with old labelsthat arebeginning to peel off.

Stickers that are beginning to peel away, leaving a sticky residue (P.6).

P. 6

Do not use your CDs with labels or stickers attached.

Labels are attached (P.7).

Do Not Use Special Shape CDs

P. 7

Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction.(P.8).

P. 8

Be sure to use CDs with disc mark

****

*******

**************

*******

P. 4

Do not use solvents such as benzine,

thinner,commercially available cleaners, or antistatic spray intended for analog discs.

RECORDABLE

REWRITABLE

Only for this unit.

CD-Rs and CD-RWs which have not undergone finalization processing cannot be played. (For more information on finalization processing, refer to the manual for your CD-R/CD-RW writing software or CD-R/CD-RW recorder.) Additionally, depending on the recording status, it may prove impossible to play certain CDs record on CD-R or CD-RW.

3. INSTALLATION

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and theunit and systemwork properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes orother modificationsof the vehicle. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, likean emergency stop. If installation angleexceeds 30° fromhorizontal, theunit might notgive its optimumperformance.

30°

Avoid installing theunit where it would be subjectto high temperature, such as fromdirect sunlight, or from hot air, from heater, or whereit would besubject todust dirt orexcessive vibration. Be sure toremove the frontpanel beforeinstalling the unit.

DIN FRONT/REAR-MOUNT

This unit canbe property installedeither from“Front”(conventional DINFront-mount)or “Rear”(DIN Rear-mount installation, utilizing threaded screw holesat thesides of the unit chassis). For details, refer to thefollowing illustrated installationmethods Aand B.

DIN FRONT-MOUNT (Method A)

Installation the unit

182

1. Dashboard

2. Holder After inserting the half sleeve into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place.

3. Screw

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (5x15mm)

5. Screw

6. Support Strap Be sure to use the support strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle.

7. Plain washer

Removing the unit

Trim Plate Installation:

Push the trim plate against the chassis until it is fitted. You must do this before you install the front panel, otherwise it can't be attached.

DIN REAR-MOUNT (METHOD B)

Installation using thescrew holes onthe sidesof the unit. Fasteningthe unitto the factoryradio mounting bracket.

a. Frame b. Insert fingers into the groove in the front

of frame and pull out to remove the frame. (When re-attaching the frame, point the side with a groove down wards and attach it.)

c. Insert the levers supplied with the unit

into the grooves at both sides of the unit as shown in figure until they click. Pulling the levers makes it possible to remove the unit from the dashboard.

1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side.

2. Screw

3. Factory radiomounting bracket.

4. Dashboardor Console

5. Hook(Remove this part)

Note: the mounting box, outer trim ring, and half-sleeve are not used for method B installation.

+ 9 hidden pages

Boss MR1400W, MR1400S User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual