Bose RC-PWSII Programming Manual
Universal Remote Control Programming Guide
Owner's Guide │ Guía del usuario │ Notice d’utilisation │Manual do proprietário
2
Contents
Programming the universal remote ..........................4
Programming your remote to control your source ..........................4
Customizing the power button ............................................................ 5
Resyncing your cable/satellite box and TV ........................................ 5
Switching between sources ..................................................................5
Controlling the volume ......................................................................... 6
Function buttons .................................................................................... 6
Using dialog mode (Solo 15/10 only) ................................................... 6
Troubleshooting .............................................................7
Universal Remote Control Programming Guide
3
Source selection
Selects a source connected
to your TV
Powers on/off the
Bose® system
Powers on/off a selected
source
Navigation pad
Lists recorded DVR
programs
Displays the Internet TV
home page
Previous channel, chapter
or track
Dialog mode
(see page 6)
Playback controls
TV aspect ratio
Closed captioning
Teletext mode
Function buttons
(see page 6)
4
Universal Remote Control Programming Guide
Programming the universal remote
You can program the universal remote to control your TV, DVD,
Blu-ray Disc™ player, cable/satellite box, game system or DVR.
Note: Your source may not be compatible with universal remote
controls. Refer to your source owner’s guide for more
information.
Programming your remote to control
your source
1. Power on your source.
2. Locate the code for your source’s brand in the Universal
Remote Device Codes book (provided).
3. On the remote control, press and hold the appropriate source
button until all six source buttons glow, then release.
For example, to program your TV, press and hold .
Only the appropriate source button glows.
4. On the number keypad, enter the code for your source’s
brand.
Note: If all six buttons blink three times, you entered an
invalid code.
Repeat steps 3 and 4.
5. Press + on the volume button.
6. Test the source for basic functions:
• TV: press the channel buttons. Press . The
settings menu appears. Press and to navigate.
• Cable/satellite box: press . The programming
guide appears.
Press and to navigate.
• DVD or Blu-ray Disc™ player: press . The settings
menu appears. Press and to navigate.
• Game system: press and to navigate through your
menu.
7. If your source responds to basic functions, press to
save your settings.
If your TV does not power off
Use the remote control’s code scanner to find the code for your
source.
1. Press + on the volume button to try another code.
Note: If all six buttons blink three times, you have cycled
through all codes for your source.
2. Test the source for basic functions (see step 6 in “Program
the remote to control your source”).
3. Repeat steps 1 and 2 until your source responds.
4. Press to save your settings.
Universal Remote Control Programming Guide
5
Customizing the power button
You can customize the power button on your remote
to power on/off your system, TV and cable/satellite box
simultaneously.
1. Program your remote to control your TV and cable/satellite
box (see page 4).
2. Press and simultaneously and hold for ten
seconds.
Both buttons flash three times.
Resyncing your cable/satellite box and TV
After customizing the power button, your cable/satellite box and
TV may become out of sync and not power on/off simultaneously.
Use the following steps to resync your system.
1. Press the source button for the device that is out of sync.
2. Press to power on or off the source.
3. Press .
Your devices power on or off simultaneously.
Switching between sources
You can switch from one source to another by pressing
the appropriate source button on the remote. In addition to
controlling the selected source, the remote always controls the
basic speaker functions (on/off, volume, mute) of your system.
Note: Before you begin, ensure you have correctly programmed
your sources.
1. Press the button for the source you want to control.
The source button glows.
2. Press .
The source powers on.
3. Press to select the correct input on your TV.
You may need to press several times to select the TV
input for the source.
On some TVs, displays a menu. Use your system remote
to choose the correct TV input and close this menu.
Universal Remote Control Programming Guide
6
Controlling the volume
On the remote:
• Press + to increase the volume.
• Press – to decrease the volume.
• Press to mute or unmute the audio.
Function buttons
The red, green, yellow and blue buttons on the remote control
correspond with the color-coded function buttons on your cable/
satellite box or teletext functions.
• Cable/satellite box functions: refer to your cable/satellite box
owner’s guide.
• Teletext functions: correspond with color-coded page numbers,
headings or shortcuts on a teletext display.
Using dialog mode (Solo 15/10 only)
Dialog mode provides optimal sound quality for dialog-only
programming, such as news and talk shows, by automatically
adjusting the system’s sound settings.
To enter dialog mode:
1. Point the remote at the system.
2. Press .
The system status indicator blinks amber three times and then
remains amber.
To exit dialog mode:
1. Point the remote at the system.
2. Press .
The system status indicator blinks green three times and then
remains green.
Universal Remote Control Programming Guide
7
Troubleshooting
If your remote control is inconsistent or does not work:
• Check the battery to see if it is installed properly or needs to be
replaced.
• Check that the indicator on the soundbar flashes when you press
the remote volume or .
• Point the remote control at the device you want to control.
• Check that the remote button for the selected source flashes
when you press the volume button.
• Unplug the Acoustimass® module’s power cord from the AC
(mains) outlet for one minute.
2 - Español
Contenido
Programar el control remoto universal ..................... 4
Programar el control remoto para manejar una fuente .................. 4
Personalizar el botón de alimentación ............................................... 5
Resincronizar el receptor de cable/satélite y el televisor ............... 5
Cambiar de una fuente a otra ............................................................... 5
Controlar el volumen ............................................................................. 6
Botones de función ................................................................................ 6
Utilizar el modo de diálogo (Solo 15/10 solamente) ......................... 6
Resolución de problemas .............................................7
Guía de programación del control remoto universal
Español - 3
Selección de fuente
Selecciona una fuente
conectada al televisor
Apaga/enciende el
sistema Bose
®
Apaga/enciende una
fuente seleccionada
Bloque de navegación
Muestra programas
de DVR grabados
Muestra la página de
inicio de TV por Internet
Canal, capítulo o
pista anterior
Modo de diálogo
(consulte página 6)
Controles de
reproducción
Relación de aspecto
del televisor
Subtitulado oculto
Modo Teletexto
Botones de función
(consulte la página 6)
Loading...