The Bose® 901® Series VI Direct/Reecting® Speaker System
Owner’s Guide
®
901
®
Brugervejledning
Bedienungsanleitung
Series VI Direct/Reecting
Guía del usuario
Notice d’utilisation
Manuale d’istruzioni
Gebruiksaanwijzing
Bruksanvisning
®
Speaker System
Safety Information
English
WARNING: To reduce the risk of fire or electric shock, do not expose the system to rain or
moisture.
WARNING: The apparatus shall not be exposed to dripping or splashing, and objects filled with
liquids, such as vases, shall not be placed on the apparatus. As with any electronic products, use
care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.
CAUTION
These CAUTION marks are located on the bottom of your 901® active equalizer:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated dangerous voltage within the system enclosure that may be
of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the
user to the presence of important operating and maintenance instructions in this owner’s guide.
For your records
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, insert fully.
Note: Where the mains plug or appliance coupler is used as the disconnect device, such discon-
nect device shall remain readily operable.
Additional safety information
See the additional instructions on the Important Safety Information page enclosed with this
owner’s guide.
Please read this owner’s guide
Please take the time to follow this owner’s guide carefully. It will help you set up and operate your system properly, and enjoy all of its advanced features. Save your owner’s guide for
future reference.
Serial numbers are located on the bottom panel of each 901 speaker and on the back of the
active equalizer.
Loudspeaker Serial Numbers: _______________________________________________________
Active equalizer Serial Number: _____________________________________________________
Bose Corporation ...................................................................................... inside back cover
Warranty period
The Bose® 901 speakers and active equalizer are covered by a limited 5-year transferable
warranty. Details of the warranty are provided on the warranty card that came with your
system. Please fill out the information section on the card and mail it to Bose Corporation.
Customer service
For additional help in solving problems, contact Bose customer service. See the inside back
cover for Bose customer service offices and phone numbers.
A free booklet is available: Guide to Optional System Connections for Bose 901® Direct/
Reflecting® Speaker Systems. Ask for part number 149393.
3
Setting Up
Before you begin
English
Unpacking the cartons
Thank you for purchasing the Bose® 901® Series VI Direct/Reflecting® speakers. They represent
the best in Bose Corporation speaker design and engineering and will give you many years of
listening pleasure.
The installation and operating principles of this system are significantly different from those of
conventional speakers. To obtain the best possible performance and avoid problems, please
take the time to read this guide.
CAUTION: You must have a Bose 901 active equalizer for a complete 901 speaker system. The
use of 901 Series VI speakers without the 901 Series VI active equalizer will result in improper performance. The use of graphic or parametric equalizers, instead of the Bose 901 equalizer, will result
in unsatisfactory performance.
Conventional graphic and parametric equalizers may be used in addition to, but not in place
of the Bose 901 active equalizer. However, the use of such additional equalizers is not recom-
mended since it will not improve system performance. For adequate performance you must
use the 901 Series VI active equalizer with these speakers.
A complete Bose 901 Series VI speaker system consists of three matched components: two
901 Direct/Reflecting® speakers and a separate 901 Series VI active equalizer. Two cables are
included to connect the active equalizer to your receiver or amplifier. The 901 speakers and
equalizer are packed in three separate cartons. Carefully unpack your system, saving all packing materials for possible future use.
Inspect the speakers and equalizer. If any part appears damaged, do not attempt to use the
system. Repack the speakers and equalizer in their original cartons and notify your authorized
Bose dealer immediately.
Note: Now is a good time to record the serial numbers of each speaker and the active equalizer.
Please write them on your warranty card and in the spaces provided on page 2. The serial numbers are located on the bottom of the 901 speakers and on the back of the equalizer.
WARNING: Each speaker carton weighs over 35 lb (16 kg). Use good lifting practice to avoid
injury.
WARNING: To avoid danger of suffocation, keep the plastic bags out of the reach of children.
Figure 1
What comes in the three cartons:
• Two 901 speakers
• One 901 active equalizer
• Two equalizer cables
4
Setting Up
System Compatibility
Bose® 901® Series VI speakers and Series VI active equalizer work with your stereo
components to produce a superb music system. The active equalizer is an integral part
of the system and may be connected in a variety of ways, depending on the components
you have. The two most common methods are described in this guide. Using different
components may require different connection methods. More information is available by
calling Bose Corporation. Ask for the free booklet, Guide to Optional System Connections for Bose 901 Direct/Reflecting® Speaker Systems, part number 149393.
Your 901 speakers are designed to work compatibly with receivers or amplifiers rated from
10 to 450 watts per channel. In this guide, the term receiver is used to refer to an integrated
preamplifier and power amplifier (which may also contain an AM/FM tuner). The term
amplifier is used to describe configurations involving separate preamplifier and amplifier
components.
Most receivers have a TAPE MONITOR connection. The 901 active equalizer is most
commonly connected to the tape monitor connections on the receiver. If you plan to
connect a tape recorder, use the set of inputs and outputs located on the back of the 901
active equalizer marked TAPE RECORDER CONNECTIONS.
If you have recently purchased a home theater receiver, you may be considering using
your 901 speakers for the front channels. Your home theater receiver must have accessible
PRE AMP OUT/MAIN AMP IN connections for the front channels if you are to use your 901
speakers in this way. These may also be called the ADAPTER or SIGNAL PROCESSOR
connections.
English
Installation steps
Follow these steps, in the order below, to install your 901 Series VI speaker system.
1. Choose the best locations and support for the 901 speakers (page 6).
2. Connect the speakers to the amplifier or receiver (page 8).
3. Connect the 901 active equalizer to the amplifier or receiver using either the TAPE
MONITOR or PRE AMP OUT/MAIN AMP IN connections (page 9).
4. Test the system to see that the audio signal is correctly processed by the active equalizer (page 12).
5
Setting Up
B
B
B
A
A
A
A
Choosing the location for your speakers
Choose locations for your 901® speakers that use the walls to best advantage by reflecting
sound throughout the listening room. Refer to the drawing on page 7.
English
Guidelines for placement
Place the speakers along the same wall (see Figure 3):
• 4 to 12 feet (1.2 – 3.6 m) apart, with the V-shaped rear of the speaker between 8 and 18
inches (20 – 45 cm) from the rear wall. Do not aim the V toward a corner.
• 18 inches (45 cm) of clear space around the sides, top, and bottom of the speakers.
• at least 2 feet (60 cm) from sound-absorbent furnishings.
• 18 to 48 inches (45 – 120 cm) from the side and rear walls.
• 18 to 36 inches (45 – 91 cm) from the floor or ceiling. Do not place the speakers exactly
halfway between floor and ceiling.
Within these guidelines, remember that the closer the speakers are placed to a reflective
surface, like a wall, the more bass is reproduced.
Choose the support for your speakers
You may place 901 speakers on a table or shelf. You may also use Bose® floor pedestals, or
suspend the speakers from your ceiling. Refer to Figure 3 on page 7.
To set the speakers on a table or shelf
Although each speaker weighs 35 lb (16 kg), a suitable shelf or table must be able to support
140 lb (64 kg). Keep an adequate distance between the speakers and the rear wall as listed in
“Guidelines for placement” above.
Figure 2
Pedestal (A) and ceiling mount
(B) pilot holes
To stand the speakers on the oor
Use only Bose pedestals (PS-6) as floor stands. They are designed to provide the proper
support and are available through your authorized Bose dealer. Please read the pedestal
attachment instructions before making any speaker connections. Four pilot holes on the
bottom of each speaker (see Figure 2, hole set A) are pre-drilled for the purpose of anchoring
the speaker to the pedestal.
To suspend the speakers from the ceiling
Use these guidelines to ensure safe suspension of your 901 speakers. Three steel support
chains are recommended. We cannot specify the ceiling attachments. The type to use
depends on the type of building construction.
CAUTION: Do not mount on surfaces that are not sturdy enough, or that have hazards concealed behind them, such as plumbing or electrical wire. If you are unsure of your ability to install
these speakers, contact a qualified professional installer.
Note: The speakers hang in an inverted position, with the terminal connections facing up.
Carefully rotate the Bose logo 180˚ (so it appears right side up) before hanging the speakers.
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.