Bosch UML-19P-90 User Manual 2

19-inch LCD Flat Panel Monitor

UML-19P-90

en User’s Manual

UML-19P-90 LCD Monitor Table of Contents | en iii

Table of Contents

1Safety 1

1.1 Important Safety Instructions 1

1.2 Safety Precautions 2

1.3 Important Notices 3

1.4 Customer Support and Service 7

2 Unpacking 9

2.1 Parts List 9

3 Exploded View 9

4Description 10

4.1 Features 10

4.2 Power 11

5 Installing the Monitor 11

5.1 Ventilation 11

5.2 Mounting the Monitor 11

5.2.1 Desktop Installation 11

5.2.2 Wall Mount Installation 11

5.2.3 Rack-mount Installation 12

5.3 Connecting the PC Signal to the Monitor 14

6 Navigating the Monitor 14

6.1 Navigating the Front Panel 14

6.2 Navigating the Monitor On-screen Display (OSD) 15

6.3 On-screen Display Menus 15

6.4 Auto Adjust 16

6.5 Screen 17

6.6 RGB 18

6.7 Utility 19

6.8 Language 19

6.9 OSD 20

6.10 Audio 20

7 Power Management 21

7.1 Power Consumption 21

7.2 LED Indicator 21

8 Trouble Shooting Guide 21

9 Maintenance 22

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

iv en | Table of Contents UML-19P-90 LCD Monitor

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Safety | en 1

1Safety

1.1 Important Safety Instructions

Read, follow, and retain for future reference all of the following safety instructions. Heed all
warnings on the unit and in the operating instructions before operating the unit.

1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions
provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist
fluff-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol
cleaners.

2. Heat Sources - Do not install the unit near any heat sources such as radiators, heaters,
stoves, or other equipment (including amplifiers) that produce heat.

3. Ventilation - Any openings in the unit enclosure are provided for ventilation to prevent
overheating and ensure reliable operation. Do not block or cover these openings. Do not
place the unit in an enclosure unless proper ventilation is provided, or the manufacturer's
instructions have been adhered to.

4. Water - Do not use this unit near water, for example near a bathtub, washbowl, sink,
laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor
installation, or in any area classified as a wet location. To reduce the risk of fire or
electrical shock, do not expose this unit to rain or moisture.

5. Object and liquid entry - Never push objects of any kind into this unit through openings
as they may touch dangerous voltage points or short-out parts that could result in a fire
or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled
with liquids, such as vases or cups, on the unit.

6. Lightning - For added protection during a lightning storm, or when leaving this unit
unattended and unused for long periods, unplug the unit from the wall outlet and
disconnect the cable system. This will prevent damage to the unit from lightning and
power line surges.

7. Controls adjustment - Adjust only those controls specified in the operating instructions.
Improper adjustment of other controls may cause damage to the unit. Use of controls or
adjustments, or performance of procedures other than those specified, may result in
hazardous radiation exposure.

8. Overloading - Do not overload outlets and extension cords. This can cause fire or
electrical shock.

9. Power cord and plug protection - Protect the plug and power cord from foot traffic,
being pinched by items placed upon or against them at electrical outlets, and its exit
from the unit. For units intended to operate with 230 VAC, 50 Hz, the input and output
power cord must comply with the latest versions of IEC Publication 227 or IEC Publication

245.

10. Power disconnect - Units with or without ON/OFF switches have power supplied to the
unit whenever the power cord is inserted into the power source; however, the unit is
operational only when the ON/OFF switch is in the ON position. The power cord is the
main power disconnect device for switching off the voltage for all units.

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

2 en | Safety UML-19P-90 LCD Monitor

11. Power sources - Operate the unit only from the type of power source indicated on the
label. Before proceeding, be sure to disconnect the power from the cable to be installed
into the unit.
– For battery powered units, refer to the operating instructions.
– For external power supplied units, use only the recommended or approved power

supplies.

– For limited power source units, this power source must comply with EN60950.

Substitutions may damage the unit or cause fire or shock.

– For 24 VAC units, voltage applied to the unit's power input should not exceed ±10%,

or 28 VAC. User-supplied wiring must comply with local electrical codes (Class 2
power levels). Do not ground the supply at the terminals or at the unit's power
supply terminals.

– If unsure of the type of power supply to use, contact your dealer or local power

company.

12. Servicing - Do not attempt to service this unit yourself. Opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.

13. Damage requiring service - Unplug the unit from the main AC power source and refer
servicing to qualified service personnel when any damage to the equipment has occurred,
such as:
– the power supply cord or plug is damaged;
– exposure to moisture, water, and/or inclement weather (rain, snow, etc.);
– liquid has been spilled in or on the equipment;
– an object has fallen into the unit;
– unit has been dropped or the unit cabinet is damaged;
– unit exhibits a distinct change in performance;
– unit does not operate normally when the user correctly follows the operating

instructions.

14. Replacement parts - Be sure the service technician uses replacement parts specified by
the manufacturer, or that have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical shock, or other hazards.

15. Safety check - Safety checks should be performed upon completion of service or repairs
to the unit to ensure proper operating condition.

16. Installation - Install in accordance with the manufacturer's instructions and in
accordance with applicable local codes.

17. Attachments, changes or modifications - Only use attachments/accessories specified by
the manufacturer. Any change or modification of the equipment, not expressly approved
by Bosch, could void the warranty or, in the case of an authorization agreement, authority

to operate the equipment.

1.2 Safety Precautions

DANGER! High risk:

This symbol indicates an imminently hazardous situation such as “Dangerous Voltage”
inside the product. If not avoided, this will result in an electrical shock, serious bodily
injury, or death.

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Safety | en 3

!

!

!

i

WARNING! Medium risk:
Indicates a potentially hazardous situation. If not avoided, this could result in serious bodily
injury or death.

CAUTION! Medium Risk
Indicates a potentially hazardous situation. If not avoided, this may result in minor or
moderate injury. Alerts the user to important instructions accompanying the unit.

CAUTION! Low risk: (without safety alert symbol)
Indicates a potentially hazardous situation. If not avoided, this may result in property
damage or risk of damage to the unit.

NOTICE!

This symbol indicates information or a company policy that relates directly or indirectly to
the safety of personnel or protection of property.

1.3 Important Notices

Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit

may fall, causing serious injury and/or serious damage to the unit. Use only with the cart,
stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use
caution and care when moving the cart/apparatus combination to avoid injury from tip-over.
Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to
overturn. Mount the unit per the manufacturer's instructions.
All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at
least 3 mm in each pole, into the electrical installation of the building.
If it is needed to open the housing for servicing and/or other activities, use this all-pole switch
as the main disconnect device for switching off the voltage to the unit.
Camera grounding - For mounting the camera in potentially damp environments, ensure to
ground the system using the ground connection of the power supply connector (see section:
Connecting external power supply).
Camera lens - An assembled camera lens in the outdoor housing must comply and be tested in
accordance with UL/IEC60950. Any output or signal lines from the camera must be SELV or
Limited Power Source. For safety reasons the environmental specification of the camera lens
assembly must be within the environmental specification of -10 °C (14 °F) to 50 °C (122 °F).
Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140
feet, in accordance with NEC800 (CEC Section 60).

Coax grounding:

– Ground the cable system if connecting an outside cable system to the unit.
– Connect outdoor equipment to the unit's inputs only after this unit has had its grounding

plug connected to a grounded outlet or its ground terminal is properly connected to a
ground source.

– Disconnect the unit's input connectors from outdoor equipment before disconnecting the

grounding plug or grounding terminal.

– Follow proper safety precautions such as grounding for any outdoor device connected to

this unit.
U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides
information regarding proper grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors, location of discharge unit,

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

4 en | Safety UML-19P-90 LCD Monitor

i

connection to grounding electrodes, and requirements for the grounding electrode.

NOTICE!

This device is intended for use in public areas only.
U.S. federal law strictly prohibits surreptitious recording of oral communications.

Your Bosch product was developed and manufactured with high-quality material and
components that can be recycled and reused. This symbol means that electronic and
electrical appliances, which have reached the end of their working life, must be collected and
disposed of separately from household waste material. Separate collecting systems are
usually in place for disused electronic and electrical products. Please dispose of these units at
an environmentally compatible recycling facility, per European Directive 2002/96/EC.
Environmental statement - Bosch has a strong commitment towards the environment. This
unit has been designed to respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid
electrostatic discharge.
NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when
handling the electrostatic-sensitive printed circuit boards.
Fuse rating - For security protection of the device, the branch circuit protection must be
secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC
Section 60).
Grounding and polarization - This unit may be equipped with a polarized alternating current
line plug (a plug with one blade wider than the other blade). This safety feature allows the
plug to fit into the power outlet in only one way. If unable to insert the plug fully into the
outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for
earth grounding). This safety feature allows the plug to fit into a grounded power outlet only.
If unable to insert the plug into the outlet, contact a locally certified electrician to replace the
obsolete outlet. Do not defeat the safety purpose of the grounding plug.
Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive
force or shock may damage the unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially regarding clearance from
power and lightning conductors and transient protection, must be in accordance with NEC725
and NEC800 (CEC Rule 16-224 and CEC Section 60).
Permanently connected equipment - Incorporate a readily accessible disconnect device in
the building installation wiring.
Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.
PoE - Never supply power via the Ethernet connection (PoE) when power is already supplied
via the power connector.
Power disconnect - Units have power supplied whenever the power cord is inserted into the
power source. The power cord is the main power disconnect for all units.
Power lines - Do not locate the camera near overhead power lines, power circuits, or
electrical lights, nor where it may contact such power lines, circuits, or lights.

SELV

All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should
only be connected to other SELV circuits.
Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the
SELV circuit to the Telephone Network Voltage (TNV) circuits.

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Safety | en 5

i

Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security
Systems cannot be held liable for any damage that results from missing video information. To
minimize the risk of lost digital information, Bosch Security Systems recommends multiple,
redundant recording systems, and a procedure to back up all analog and digital information.

NOTICE!

This is a class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.

FCC & ICES INFORMATION

(U.S.A. and Canadian Models Only)

This device complies with part 15 of the FCC Rules. Operation is subject to the following
conditions:
– this device may not cause harmful interference, and
– this device must accept any interference received, including interference that may cause

undesired operation.

Note

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits
are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and
radiates radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his expense.
Intentional or unintentional modifications, not expressly approved by the party responsible for
compliance, shall not be made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult the dealer or an experienced
radio/television technician for corrective action.
The user may find the following booklet, prepared by the Federal Communications
Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This
booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock
No. 004-000-00345-4.

INFORMATIONS FCC ET ICES

(modèles utilisés aux États-Unis et au Canada uniquement)
Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux
conditions suivantes:
– cet appareil ne peut pas provoquer d'interférence nuisible et
– cet appareil doit pouvoir tolérer toutes les interférences auxquelles il est soumit, y

compris les interférences qui pourraient influer sur son bon fonctionnement.
AVERTISSEMENT: Suite à différents tests, cet appareil s’est révélé conforme aux exigences
imposées aux appareils numériques de Classe A en vertu de la section 15 du règlement de la
Commission fédérale des communications des États-Unis (FCC). Ces contraintes sont
destinées à fournir une protection raisonnable contre les interférences nuisibles quand
l'appareil est utilisé dans une installation commerciale. Cette appareil génère, utilise et émet
de l'energie de fréquence radio, et peut, en cas d'installation ou d'utilisation non conforme
aux instructions, générer des interférences nuisibles aux communications radio. L’utilisation
de ce produit dans une zone résidentielle peut provoquer des interférences nuisibles. Le cas
échéant, l’utilisateur devra remédier à ces interférences à ses propres frais.

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

6 en | Safety UML-19P-90 LCD Monitor

i

Au besoin, l’utilisateur consultera son revendeur ou un technicien qualifié en radio/télévision,
qui procédera à une opération corrective. La brochure suivante, publiée par la Commission
fédérale des communications (FCC), peut s’avérer utile : « How to Identify and Resolve Radio­TV Interference Problems » (Comment identifier et résoudre les problèmes d’interférences de
radio et de télévision). Cette brochure est disponible auprès du U.S. Government Printing
Office, Washington, DC 20402, États-Unis, sous la référence n° 004-000-00345-4.
AVERTISSEMENT: Ce produit est un appareil de Classe A. Son utilisation dans une zone
résidentielle risque de provoquer des interférences. Le cas échéant, l’utilisateur devra
prendre les mesures nécessaires pour y remédier.

Disclaimer

Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL

2044. UL Certification does not cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED
FUNCTIONS OF THIS PRODUCT.

Disclaimer

Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL
60950-1. UL Certification does not cover the performance or reliability of the security or
signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED
FUNCTIONS OF THIS PRODUCT.

Copyright

This user guide is the intellectual property of Bosch Security Systems, Inc. and is protected by
copyright.
All rights reserved.

Trademarks

All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.

NOTICE!

This user guide has been compiled with great care and the information it contains has been
thoroughly verified. The text was complete and correct at the time of printing. The ongoing
development of the products may mean that the content of the user guide can change without
notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly
from faults, incompleteness or discrepancies between the user guide and the product
described.

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Safety | en 7

1.4 Customer Support and Service

If this unit needs service, contact the nearest Bosch Security Systems Service Center for
authorization to return and shipping instructions.

Service Centers
USA
Repair Center

Telephone: [phone]
Fax: [phone]
E-mail: [e-mail]

Customer Service

Telephone: [phone]
Fax: [phone]
E-mail: [e-mail]

Technical Support

Telephone: [phone]
Fax: [phone] or 717-735-6560
E-mail: [e-mail]

Canada

Telephone: [phone]
Fax: [phone]

Europe, Middle East, Africa Region
Repair Center

Telephone: [phone]
Fax: [phone]
E-mail: [e-mail]

Asia Region
Repair Center

Telephone: [phone]
Fax: [phone]
E-mail: [e-mail]

Customer Service

Telephone: [phone] or
86 (0) 756 7633121
Fax: [phone]
E-mail: [e-mail]

Warranty and additional information

For additional information and warranty queries, please contact your Bosch Security Systems
representative or visit our website at www.boschsecurity.com.

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

8 en | Safety UML-19P-90 LCD Monitor

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Unpacking | en 9

2 Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing,
notify your Bosch Security Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.

2.1 Parts List

The following table lists the parts included:

Quantity Part

1 UML-19P-90 Color LCD Flat Panel Monitor
1 User’s manual
2 Power Cords, 3-wire with grounded plug 1.8 m (6 ft) long:

one with a U.S. plug type and one with a European Continental plug type
1 VGA to VGA (D-SUB) cable, 1.5 m (5 ft)
1 Power Supply (brick):

UML-19P-90: 12 VDC, 4.16 A, 100-240 VAC, 50/60 Hz ,1.1 m (3.5 ft)
1 DVI-D to DVI-D Cable, 1.5 m (5 ft)
1 Audio Cable, PC style, 1.1 m (3.5 ft)

3 Exploded View

Figure 3.1 Front Panel

Reference # Button Description

1 Input Button Selects the signal to be

2 Menu Button Selects the on-screen display (OSD).
3



displayed; choices are: VGA or
DVI.

Adjusts the value when in the
OSD or auto adjusts when in
VGA mode.

Operates as the Select/
Enter key when in the OSD
menu.

Scrolls up in the OSD.

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

10 en | Description UML-19P-90 LCD Monitor

Reference # Button Description

4

5

6

7Not Used
8 Power Button /







LED Indicator

Adjusts the value when in the
OSD or decreases Audio Mute
menu.

Decreases the value when in
the OSD or decreases the
volume.

Increases the value when in the
OSD or increases the volume.

Power On (green)
Unsupported Mode (green)
Standby/Power Off (red)

Scrolls down in the OSD.

Scrolls left in the OSD.

Scrolls right in the OSD.

Figure 3.2 Bottom Panel

Reference # Connector Description

1 DVI-D Digital Video Interface
2D-Sub/VGARGB Signal Input
3

4

1/8 in. Mini Phone
Plug

5.5 mm Input Jack 12 VDC

4Description

The Bosch UML-19P-90 is a 19-inch, high-resolution VGA color monitor for use with digital
video recorders (DVR) and PC applications.
Monitor control functions are accessed via the front panel push buttons and the multi­language On-screen Display (OSD). See Figure 3.1 for front panel descriptions.

4.1 Features

The UML-19P-90 is designed to display Analog VGA and DVI signals.
–19-inch
– 100-240 VAC Power Supply
– High-resolution Display

– 1280 x 1024
–VGA Input
– DVI-D Input

– On-screen Display (OSD) with Multiple Languages

PC Audio

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Installing the Monitor | en 11

4.2 Power

Model No. Rated Voltage Voltage Range Power at Rated Voltage

UML-19P-90 120/230 VAC,

50/60 Hz

100-240 VAC 40 W (max)

5 Installing the Monitor

This chapter outlines the procedures to install the UML-19P-90. A qualified service person
should install the monitor and adhere to all local codes.

5.1 Ventilation

To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not
covered.

5.2 Mounting the Monitor

The UML-19P-90 is designed for use on a desktop or mounted to a wall or rack.

5.2.1 Desktop Installation

The UML-19P-90 is delivered with a 3-pole US-style power cord and a 2-pole Euro-style power
cord. Use the US-style power cord where 120 VAC, 60 Hz power is available; use the Euro-style
power cord where 230 VAC, 50 Hz power is available. The monitor automatically adjusts to
either power input voltage.

5.2.2 Wall Mount Installation

The square mounting holes (100 mm [3.9 in.] centers) are compatible with the Bosch UMM­LW-20B fixed wall mount or the UMM-LW-30B swivel/tilt. To install the wall mount, do the
following:

1. Remove the base from the LCD panel section by unscrewing the four (4) holding screws
before separating the base from the panel. NOTE: Save screws for future use.

Figure 5.1 Removing the Base

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

12 en | Installing the Monitor UML-19P-90 LCD Monitor

i

2. Mount the unit to the mounting device (not provided) using the four (4) mounting holes
on the rear panel. The square mounting hole patterns are standard on 100 mm (3.9 in.)
centers.

Figure 5.2 Mounting the Device

5.2.3 Rack-mount Installation

To rack the UML-19P-90 using the RMK-08 mounting bracket, do the following:

NOTICE! Prior to installing the UML-19P-90 monitor to the RMK-08 rack mount bracket, four
(4) user supplied rack mount screws and clips are required.

1. Use a Phillips head screw driver to remove the base of the monitor.

2. Align the two (2) supplied mounting guide brackets flush with the screw holes on the
back of the monitor. Screw the (4) supplied self-tapping screws into the non-threaded
holes (see Figure 5.3).

Figure 5.3 RMK-08 Mounting Guide Bracket Installation

Reference # Description
1Self-tapping Screw
2 Mounting Guide Bracket

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Installing the Monitor | en 13

3. If necessary, remove the side brackets from the 8C or current position and screw to the
9V position.

4. Adjust the location of the inner brackets so they align flush with the inner threaded holes
on the back of the monitor.

5. Secure the RMK-08 rack mount bracket to the UML-19P-90 flat panel from the back side
using the VESA 100 mm mounting points and the supplied four (4), M4*8 Phillips screws.

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

14 en | Navigating the Monitor UML-19P-90 LCD Monitor

6. Secure the fully assembled rack mount to the cabinet using four (4) rack mount screws
and clips (not provided).

5.3 Connecting the PC Signal to the Monitor

VGA

The monitor can be connected to the analog VGA signal by using the provided VGA cable (D­SUB to D-SUB).

Figure 5.4 VGA Input

DVI

The monitor can be connected to a digital signal by using the provided DVI cable (DVI-D to
DVI-D).

Figure 5.5 DVI Input

6 Navigating the Monitor

6.1 Navigating the Front Panel

Use the front panel to make any necessary OSD adjustments to the UML-19P-90. See the
figure below for an explanation of the front panel.

Figure 6.1 Front Panel Buttons

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Navigating the Monitor | en 15

Reference # Button Description

1 Input Button Selects the signal to be

displayed; choices are:

VGA or DVI.
2 Menu Button Selects the on-screen display (OSD).
3

4

5

6

7Not Used
8 Power Button / LED









Indicator

Adjusts the value when in

the OSD.

Adjusts the value when in

the OSD or auto adjusts

when in VGA mode.

Decreases the value when

in the OSD.

Increases the value when

in the OSD.

Power On (green)

Unsupported Mode (green)

Standby/Power Off (red)

Operates as the Select/
Enter key when in the OSD
menu.

Scrolls up in the OSD.

Scrolls down in the OSD.

Scrolls left in the OSD.

Scrolls right in the OSD.

6.2 Navigating the Monitor On-screen Display (OSD)

The UML-19P-90 have two (2) modes: VGA and DVI. The LCD is programmed through the on­screen display (OSD) menus and submenus where an operator can select operating
parameters. To access the OSD menus, press the Menu button. Use the front panel of the
monitor to make any necessary adjustments to the OSD.
To navigate the set up menus, follow the steps below:

1. Connect the VGA or DVI cable.

2. If required, press the Input button until a signal is displayed. NOTE: Menus are not
available without a signal applied.

3. Press the Power button to turn on the unit (see Figure 3.1).

4. Press the Menu button to activate the main menu selections (see Figure 3.1).

5. Press the

6. Press the Input button to enter a selected menu.

7. Press the

8. When finished, scroll to Exit and press the Menu button. Note: If there is no Exit option,
press the Menu button.

and the buttons to select a main menu.

and the button to toggle the OSD values.

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

16 en | Navigating the Monitor UML-19P-90 LCD Monitor

6.3 On-screen Display Menus

There are five (5) on-screen menus that allow you to customize your settings. Press the Menu
button on the front panel of the monitor to access the OSD menu, then press the Input button
to enter your selection.

Icon Menu Function

Auto Adjust

Screen Adjusts the Brightness and Contrast in both

RGB

Utility Enables the user to reset all settings to the factory

Language Adjusts the Language. Language choices are:

Adjusts the screen size when input is in DSUB
Analog (VGA) mode.

modes, H. Position, V. Position, Phase Adjust, and
Clock Adjust performance in VGA mode.

Selects User, 9300, 6500. Adjusts the Color Temp
of the monitor (MIN, 1-99%, MAX).

default values, Auto Set, or select an Input

English, French, German, Spanish, and Korean.

6.4 Auto Adjust

To access the Auto Adjust submenu, press the Menu button on the front panel of the monitor,
then press the left and right arrows to highlight the Auto Adjust icon. Next, press the Input
button on the front panel to access the Auto Adjust submenu options. Note: Auto Adjust is
only available in DSUB Analog (VGA) mode.

AUTO ADJUST

ENTER: SEL
ADJUST:

OSD

Audio Adjusts the Audio Volume and Audio Mute.

Enables the user to turn on and off the OSD menu,
and displays the following information: OSD
Timeout, OSD H. Position, OSD V. Position, and
OSD Transparency. Available in both VGA and DVI
modes.

EXIT: MENU

Resolution* Horizontal Frequency* Vertical Frequency*

* Displays information about the current graphics adapter settings.

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Navigating the Monitor | en 17

6.5 Screen

To access the Screen submenu, press the Menu button on the front panel of the monitor, then
press the left and right arrows to highlight the Screen icon. Next, press the Input button on
the front panel to access the Screen submenu options.

DVI Digital Mode

BRIGHTNESS

CONTRAST

H. POSITION
V. POSITION
PHASE ADJUST
CLOCK ADJUST

1280x1024 63.9 kHz 60Hz

DSUB Analog (VGA) Mode

BRIGHTNESS

CONTRAST

H. POSITION

V. POSITION

PHASE ADJUST

CLOCK ADJUST

1280x1024 63.9 kHz 60Hz

Submenu Definition

BRIGHTNESS

Adjusts the brightness level for video performance (range - MIN, 1­99%, MAX).

CONTRAST

Adjusts the contrast level for video performance (range - MIN, 1-99%,
MAX).

H. POSITION

Adjusts the horizontal position for the desktop (range - MIN, 1-99%,
MAX). Note: not available in DVI Digital mode.

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

18 en | Navigating the Monitor UML-19P-90 LCD Monitor

V. POSITION

PHASE ADJUST

CLOCK ADJUST

6.6 RGB

To access the RGB submenu, press the Menu button on the front panel of the monitor, then
press the left and right arrows to highlight the RGB icon. Next, press the Input button on the
front panel to access the RGB submenu options. Press the up and down arrows to select the
Color submenu.

DVI Digital and DSUB Analog (VGA) Modes

Adjusts the vertical position for the desktop (range - MIN, 1-99%,
MAX). Note: not available in DVI Digital mode.

Adjusts for best picture quality by adjusting for sharpness of vertical
lines (range - MIN, 1-99%, MAX). Note: not available in DVI Digital
mode.

Adjusts the best picture quality by adjusting the horizontal size of the
video displayed (range - MIN, 1-99%, MAX). Note: not available in DVI
Digital mode.

COLOR TEMP

RED

GREEN

BLUE

1280x1024 63.9 kHz 60Hz

Submenu Definition

COLOR TEMP Options are: USER, 9300, and 6500

RED

GREEN

BLUE

Adjusts the color Red (range - MIN, 1-99%, MAX)
Adjusts the color Green (range - MIN, 1-99%, MAX)
Adjusts the color Blue (range - MIN, 1-99%, MAX)

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Navigating the Monitor | en 19

6.7 Utility

To access the Utility submenu, press the Menu button on the front panel of the monitor, then
press the left and right arrows to select the Utility icon. Next, press the Input button, then
press the up and down arrows to select the Utility submenu options.

DVI Digital and DSUB Analog (VGA) Modes

RECALL

FULL AUTO

INPUT SELECT

1280x1024 63.9 kHz 60Hz

Submenu Definition

RECALL Restores default settings.
FULL AUTO Auto synchronizes the screen to the graphics adaptor. When selected,

INPUT SELECT Adjusts between Analog (VGA) and Digital (DVI).

6.8 Language

The Language menu adjusts the language of the OSD. Choices are: English, French, German,
Spanish, and Korean. To access the Language submenu, press the Menu button on the front
panel of the monitor, press the Input button, then press the left and right arrows to select the
Language icon. Press the up and down arrows to select the Language submenu options.

DVI Digital and DSUB Analog (VGA) Modes

ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
KOREAN

displays “Auto in Process...”. Note: not available in Digital (DVI) mode.

1280x1024 63.9 kHz 60Hz

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

20 en | Navigating the Monitor UML-19P-90 LCD Monitor

6.9 OSD

To access the OSD submenu, press the Menu button on the front panel of the monitor, press
the Input button, then press the left and right arrows to select the OSD icon. Press the up and
down arrows to select the OSD submenu options.

DVI Digital and DSUB Analog (VGA) Modes

OSD TIME OUT
OSD H. POSITION
OSD V. POSITION
OSD TRANSPARENCY

1280x1024 63.9 kHz 60Hz

Submenu Definition
OSD TIME OUT Adjusts the on-screen display time (range 5s-60s).
OSD H. POSITION Adjusts the horizontal position for the OSD menu (range - MIN, 1-99%,

OSD V. POSITION Adjusts the vertical position for the OSD menu (range - MIN, 1-99%,

OSD TRANSPARENCY Adjusts the transparency level for video performance (options - MIN,

6.10 Audio

To access the Audio submenu, press the Menu button on the front panel of the monitor, press
the Input button, then press the left and right arrows to select the Audio icon. Press the up
and down arrows to select the Audio submenu options.

DVI Digital and DSUB Analog (VGA) Modes

MAX).

MAX).

20, 40, 60, 80, and MAX increments).

AUDIO VOLUME
AUDIO MUTE

1280x1024 63.9 kHz 60Hz

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

UML-19P-90 LCD Monitor Power Management | en 21

Submenu Definition
AUDIO VOLUME Adjusts the audio volume (range - MIN, 1-99%, MAX).
AUDIO MUTE Enables or disables the mute function (options - ON and OFF).

7 Power Management

This monitor features a power management system to “power down” upon receipt of the
display power management signaling (DPMS) from a DPMS video card.
To conserve energy and extend monitor life, this monitor automatically starts a power saving
mode when the input signal disappears (such as when a PC enters sleep mode). The power
saving mode is active when the LED on the Power button switches from green to red and
normal operation resumes automatically when the input signal is restored.
The monitor enters an appropriate mode through identifying each of the modes of the
signaling system.

7.1 Power Consumption

Mode UML-19P-90

ON 40 W
STANDBY < 3.0 W

7.2 LED Indicator

The power management feature of the monitor is comprised of three stages: On (green),
Unsupported mode (green), and Standby/Power Off (red).

8 Trouble Shooting Guide

Problem Solution

No image is displayed on screen – Check that the power cord of the monitor is securely connected into the

wall outlet or grounded extension cable or strip.
– Power switch should be in the ON position and the LED lit.
– Check that the Brightness and/or Contrast adjustments of the display have

not been turned down to minimum levels.

“Power Saving Mode” message is
displayed

Display image is not centered, is
too small, or too large in the VGA
mode

– The signal cable should be completely connected to the video card/

computer.
– The video card should be completely seated in its slot and the computer

switched ON.
Push the up key to activate the Autoset function.

Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11

22 en | Maintenance UML-19P-90 LCD Monitor

i

Problem Solution

Vertical or horizontal noise is
present in the picture in VGA
mode

Incorrect colors – Press the Menu button on the front panel of the monitor, then press the

The error message “Unsupport
Mode” is displayed

Adjust the Clock and Phase in the Screen submenu.

right arrow to select the Color menu. Press the down arrow on the front
panel and select 9300K or 6500K.

- or -

– Press the Menu button on the front panel of the monitor, then press the

right arrow to select the Utility menu. Press the down arrow on the front
panel and select Recall to reset to the default settings.

PC is operating with either a resolution or refresh rate that is not supported.
Change the PC timing mode to one of the valid combinations below:
Timing mode
640 x 480; 60/72/75 Hz
800 x 600; 60/72/75 Hz
1024 x 768; 60/70/75 Hz
1280 x 1024; 60/75 Hz

9 Maintenance

To clean the LCD panel, wipe off water droplets or oil immediately with absorbent cotton or a
soft lint-free cloth. Staining and discoloration may occur if left on the panel for long periods.
If the surface (polarizer) of the LCD panel is dirty or stained, use absorbent cotton or a soft
lint-free cloth to remove the residue as follows:

1. Turn off the computer or display.

2. Do not spray any liquid directly on the screen. Dampen absorben cotton or a clean, soft,
lint-free cloth with water only (using a paper towel or dirty cloth can scratch the screen).

3. Gently wipe the screen starting from the top of the screen to bottom wiping in a
downward motion. Be careful not to press too hard to avoid damaging the screen.

4. To avoid streaking, wipe the screen again with another clean, dry, lint-free cloth.

NOTICE! If water does not work, use a mild cleaner labeled for use with LCD panels, available
at office supply stores.

Do not use any of the following as a cleaning agent:
– Ketone type materials
–Ethyl alcohol
–Ethyl acid
–Tolulene
– Methyl chloride
– Ammonia
Use of these materials may permanently damage the polarizer due to a chemical reaction.

F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.

Americas
Bosch Security Systems, Inc.

850 Greenfield Road
Lancaster, Pennsylvania 17601
USA
Telephone [phone]
Fax [phone]
Email: [e-mail]
www.boschsecurity.us

Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Asia-Pacific:
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

© Bosch Security Systems, 2008; F01U099396 | 1.0 | 2008.11; Data subject to change without notice.