Bosch RSSP-241575W-FR, RSSP-121575W-FR Specsheet
Fire Alarm Systems | RSSP Retrofit Strobes
RSSP Retrofit Strobes
www.boschsecurity.com
u UL Regulated voltage ranges of 8 V to 17.5 V or 16 V
to 33 V using filtered DC or unfiltered FWR voltage
u Strobes produce 1 flash per second over the
regulated voltage range
These Wheelock retrofit strobes (15/75 cd) are a costeffective way to retrofit required strobes to bells,
horns, multitones, or speakers. They can be
synchronized when used with the SM-12/24 (single)
and DSM-12/24 (dual) Synchronization Modules or a
compatible control panel.
Certifications and approvals
Wheelock, Inc. holds these Listings and Approvals:
Region Certification
USA UL UUKC: Signaling Appliances and Equip-
ment for the Hearing Impaired (ANSI/UL
1971)
FM RSSP
CSFM see our website
Installation/configuration notes
u ADA/NFPA/ANSI compliant
u Zero inrush above peak
panels (FACPs). When used with the SM‑12/24 or
DSM‑12/24 Synchronization Modules, they are
compatible with all Bosch FACPs.
Compatible Notification Appliances
These retrofit strobes are compatible with the
following NAC devices:
Category Product Series
Chimes CH70
Horns AH, HS, and NH
Motor Bells MB
Multitone Appliances AMT and MT
Speakers E70, ET70, ET‑1010, and ET‑1080
Mounting Considerations
Mount these retrofit strobes on the indicated back
boxes for the indicated applications:
Compatible Control Panels
For synchronization, these retrofit strobe appliances
(24 V strobe models only) are compatible with the
FPA‑1000 , FPD‑7024 and the D7024 fire alarm control
Conduit
Applications
Surface
Mounted
Flush
Mounted
Four‑inch square •
Four‑inch square,
•
deep
2 | RSSP Retrofit Strobes
100‑mm European •
SBL2‑R • •
Wiring
Notice
Do not use these strobe units in coded or pulsed
signaling circuits.
The input terminals accept wires with diameters
between 18 AWG and 12 AWG (ISO 0.75 mm2 and
4 mm2).
Parts included
Quant. Component
1 Strobe
1 Hardware pack
1 Literature pack
Technical specifications
Candela Ratings
RSSP‑121575W‑FR 15 cd* (15/75)
Ordering information
RSSP‑121575W‑FR 12 VDC Retrofit Strobe (red)
12 VDC retrofit strobe listed at 15 cd, but providing
75 cd on axis
Order number RSSP-121575W-FR
RSSP‑241575W‑FR 24 VDC Fixed‑candela Retrofit
Strobe (red)
24 VDC retrofit strobe listed at 15 cd, but providing
75 cd on axis
Order number RSSP-241575W-FR
Accessories
BB‑R Steel Back Box
Black, 10.2 cm (4 in.) square, 3.8 cm (1.5 in.) deep
Order number BB-R
DBB‑R Steel Back Box (red)
8.6 cm (3.375 in.) square, 5.6 cm (2.1875 in.) deep
Order number DBB-R
DSM‑12/24‑R Dual Synchronization Module (red)
A 12/24 VDC Cooper Wheelock module that
synchronizes notification appliances on a single Class
A or two Class B circuits.
Order number DSM‑12/24‑R
RSSP‑241575W‑FR 15 cd* (15/75)
*Although Listed under UL1971 at 15 cd, the strobe
produces 75 cd on axis.
Electrical
Current Draw (maximum)
at 8 VDC to 17.5 VDC: 15/75 cd: 255 mA
at 8 FWR to 17.5 FWR: 15/75 cd: 335 mA
at 16 VDC to 33 VDC: 15/75 cd: 90 mA
at 16 FWR to 33 FWR: 15/75 cd: 145 mA
Voltage
12 V nominal: 8 VDC or FWR to 17.5 VDC or FWR
24 V nominal: 16 VDC or FWR to 33 VDC or FWR
Environmental
Relative Humidity: Up to 85%, non‑condensing
Temperature (Operating): +32°F to +120°F (0°C to +49°C)
Mechanical
Material: Molded plastic enclosure incorporating a Xenon
flashtube and Lexan lens.
NATP‑R Trim Plate (red)
13.3 cm (5.25 in.) square, 2.1 cm (0.8125 in.) thick.
Not Available.
Order number NATP-R
SBB‑R Surface‑mount Back Box (red)
14 cm (5.5 in.) x 14.2 cm (5.6 in.) x 9.1 cm (3.6 in.)
Order number SBB-R
SBL2‑R Retrofit Device Back Box (red)
dimensions 27.8 cm (10.9 in.) x 15.5 cm (6.1 in.) x
4.3 cm (1.7 in.)
Not Available.
Order number SBL2-R
SM‑12/24‑R Single Synchronization Module (red)
A 12/24 VDC Cooper Wheelock module that
synchronizes notification appliances on Class B alarm
circuits.
Not Available.
Order number SM‑12/24‑R
Trademarks
All hardware and software product names used in this
document are likely to be registered trademarks and
must be treated accordingly.
Loading...