Bosch RSS-24MCWH-FR, RSS-24MCWH-FW Specsheet

Fire Alarm Systems | RSS Wall-mount High‑candela Strobes

RSS Wall-mount High‑candela Strobes

www.boschsecurity.com

u UL Regulated voltage range of 16 V to 33 V using

filtered DC or unfiltered FWR voltage

u Strobes produce 1 flash per second over the

regulated voltage range

These Wheelock high‑candela strobes provide
intensities of 135 cd or 185 cd. They can be
synchronized when used with the DSM
Synchronization Module or a compatible control panel.
Synchronized strobes can eliminate possible
restrictions on the number of strobes in the field of
view. When synchronized, these strobes comply with
ADA requirements concerning photosensitive epilepsy
and meet the requirements of NFPA 72.

Certifications and approvals

Cooper Wheelock, Inc. holds these Listings and
Approvals:

Region

Certification

USA UL UUKC: Signaling Appliances and Equip-

ment for the Hearing Impaired (UL1971)

CSFM see our website

Installation/configuration notes

Compatible Products

The following products are compatible with the RSS
Series Strobes:

u ADA/NFPA/ANSI compliant

u Zero inrush above peak

u Fast installation with In and Out screw terminals

using 18 AWG to 12 AWG (ISO 0.75 mm2 to 4 mm2)
diameter wire

Category Product ID Product Description

Control

D7024

1

Addressable FACP

Panels

D7024 Conventional FACP

D8024

D9124

D10024A

FPD-7024

2

2

2

1

Analog FACP

Addressable FACP

Analog FACP

Addressable FACP

FPD-7024 Conventional FACP

FPA-1000 Analog Addressable FACPs

Modules DSM‑12/24‑R Dual synchronization module (red)

1

When used with a D7039 Multiplex Expansion
Module, the FPD-7024 and D7024 become
addressable fire alarm control panels (FACPs).

2

For synchronization, use the DSM-12/24-R
Synchronization Module with these control panels.

Mounting Considerations

These strobe appliances use an integral strobe
mounting plate for mounting on the indicated back
boxes for the indicated applications:

2 | RSS Wall-mount High‑candela Strobes

Conduit

Single‑gang ●

Double‑gang ● ●

Four‑inch
square

100 mm
European

BB R ● ●

SHBB R ●

Applications

●

●

Surface

Mounted

Semi‑flush

Mounted

All models have an attractive cover plate for a clean,
finished appearance.

Wiring

Notice

Do not use these strobe units in coded or pulsed
signaling circuits.

The input terminals accept wires with diameters
between 18 AWG and 12 AWG (ISO 0.75 mm2 and
4 mm2).

Parts included

Quant. Component

1 Strobe

1 Hardware pack

1 Literature pack

Trademarks

Trademarks

All hardware and software product names used in this
document are likely to be registered trademarks and
must be treated accordingly.

Ordering information

RSS‑24MCWH‑FR Wall‑mount Strobe (square, red)

Square, red wall‑mount strobe with intensities of
115 cd, 135 cd, 177 cd, and 185 cd

Order number RSS-24MCWH-FR

RSS‑24MCWH‑FW Wall‑mount Strobe (square, white)

Square, white wall‑mount strobe with intensities of
115 cd, 135 cd, 177 cd, and 185 cd

Order number RSS-24MCWH-FW

Accessories

BB‑R Steel Back Box

Black, 10.2 cm (4 in.) square, 3.8 cm (1.5 in.) deep

Order number BB-R

DBB‑R Steel Back Box (red)

8.6 cm (3.375 in.) square, 5.6 cm (2.1875 in.) deep

Order number DBB-R

NATP‑R Trim Plate (red)

13.3 cm (5.25 in.) square, 2.1 cm (0.8125 in.) thick.
Not Available.

Order number NATP-R

NATP-W Trim Plate (white)

13.3 cm (5.25 in.) square, 2.1 cm (0.8125 in.) thick

Order number NATP-W

Technical specifications

Electrical

Current Draw at
16 VDC to 33 VDC:

Current Draw at
16 FWR to 33 FWR:

Voltage (Input): 24 VDC nominal; 16 VDC or FWR to 33 VDC or

135 cd: 300 mA RMS maximum
185 cd: 420 mA RMS maximum

135 cd: 455 mA RMS maximum
185 cd: 645 mA RMS maximum

FWR

Environmental

Operating
Temperature:

Relative Humidity: Up to 85%, non‑condensing

+32°F to +120°F (0°C to +49°C)

Mechanical

Dimensions (H x W x
D):

Material: Molded plastic enclosure incorporating a

4.75 in. x 4.75 in. x 2.5 in. (12.1 cm x

12.1 cm x 6.4 cm)

Xenon flashtube and Lexan lens.

RP‑R Retrofit Plate (red)

20.3 cm (8 in.) high, 14.9 cm (5.875 in.) wide.
Not Available.

Order number RP-R

SBB‑R Surface‑mount Back Box (red)

14 cm (5.5 in.) x 14.2 cm (5.6 in.) x 9.1 cm (3.6 in.)

Order number SBB-R

SBB‑W Surface‑mount Back Box (white)

14 cm (5.5 in.) x 14.2 cm (5.6 in.) x 9.1 cm (3.6 in.)

Order number SBB-W

SFP‑R Semi‑flush Plate (red)

15.2 cm (6 in.) square by 0.8 cm (0.3125 in.) thick

Order number SFP-R

SHBB‑R Shallow Surface Back Box (red)

12.7 cm (5 in.) square by 4 cm (1.56 in.) deep

Order number SHBB-R