Bosch NIT8669UC, NIT8669SUC Maintance Manual
Cooktop
Use and Care Manual
NIT8669SUC NIT8669UC
1,768
&
&
1,78
$XWR&KHI
$XWR&KHI
p
p
!
KRRG
OLJKW
SDQHO
ORFN
DXWR
KRRG
FRQWURO
NHHS
FKHI
ZDUP
(
VSHHG
NLWFKHQ
FRRN
FRXQWXS
ERRVW
WLPHU
WLPHU
WLPHU
$XWR&KHI
p
p
!
KRRG
OLJKW
SDQHO
ORFN
DXWR
KRRG
FRQWURO
NHHS
FKHI
ZDUP
(
VSHHG
NLWFKHQ
FRRN
FRXQWXS
ERRVW
WLPHU
WLPHU
WLPHU
$XWR&KHI
() = cm
Table of Contents
Use and care manual
9 Safety Definitions ..................................................... 4
IMPORTANT SAFETY INSTRUCTIONS ........................ 5
Fire Safety .............................................................................. 5
Cooking Safety ...................................................................... 5
Burn Prevention .................................................................... 6
Child Safety ........................................................................... 6
Cleaning Safety ..................................................................... 6
Cookware Safety .................................................................. 6
Proper Installation and Maintenance ................................ 7
Electromagnetic interference ............................................. 7
Cooling fan ............................................................................ 7
Proposition 65Warning: ..................................................... 7
Causes of damage ......................................................... 8
Protecting the Environment ......................................... 8
Energy-saving Advice .......................................................... 8
Cooking with Induction ................................................. 8
Advantages of induction cooking ...................................... 8
Cookware ............................................................................... 8
Getting familiar with the appliance ............................ 10
Control Panel ..................................................................... 10
Cooking zones ................................................................... 10
Residual heat indicator .................................................... 11
Operation ...................................................................... 11
Main power switch ............................................................ 11
Setting a Cooking Zone ................................................... 11
Cook Timer ......................................................................... 13
Kitchen Timer ..................................................................... 13
Count Up Timer ................................................................. 14
®
SpeedBoost
ShortBoost function .......................................................... 14
Keep Warm function ......................................................... 15
AutoChef® ........................................................................... 15
Panel Lock .......................................................................... 17
Wipe Protection ................................................................. 18
Automatic time limitation .................................................. 18
Basic settings ..................................................................... 18
Energy consumption indicator ........................................ 20
Power Manager ................................................................. 20
Home Connect ............................................................. 20
Setting Up ........................................................................... 20
Home Connect Settings ................................................... 22
Software Update ................................................................ 24
Remote diagnostics .......................................................... 24
Information on Data Protection ....................................... 24
Wi-Fi® Module ................................................................... 24
Cooktop - Hood Sync .................................................. 25
Setting up a connection ................................................... 25
Disconnecting from the Network .................................... 26
function ...................................................... 14
Controlling the hood via the cooktop ............................ 26
Hood control settings ....................................................... 26
Cleaning and Maintenance ......................................... 27
Daily Cleaning .................................................................... 27
Cleaning guidelines .......................................................... 27
Cleaning chart ................................................................... 28
Maintenance ....................................................................... 28
Service ......................................................................... 29
Frequently-asked questions and answers (FAQ) ........ 29
Fixing Malfunctions ........................................................... 30
How to Obtain Warranty Service .................................... 31
STATEMENT OF LIMITED PRODUCT WARRANTY .. 32
What this Warranty Covers & Who it Applies to ......... 32
How Long the Warranty Lasts ........................................ 32
Repair/Replace as Your Exclusive Remedy ................ 32
Out of Warranty Product .................................................. 32
Warranty Exclusions ......................................................... 32
Pr odukt i nf o.
Additional information on products, accessories,
replacement parts and services can be found at
www.bosch-home.com and in the online shop
www.bosch-home.com/us/store
3
9 Safety Definitions
9 WARNING
Safety Defi nitions
This indicates that death or serious injuries may
occur as a result of non-observance of this warning.
9 CAUTION
This indicates that minor or moderate injuries may
occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or property may occur as a result of non-compliance with this advisory.
Note: This alerts you to important information and/or tips.
4
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY I NS TRU CTI ONSRE AD AND SAVE THESE INSTRUCTIONS
WARNING
When properly cared for, your new appliance has been
designed to be safe and reliable. Read all instructions
carefully before use. These precautions will reduce the
risk of burns, electric shock, fire, and injury to persons.
When using kitchen appliances, basic safety precautions
must be followed, including those in the following pages.
Examine the appliance after unpacking it. In the event of
transport damage, do not plug it in.
Fire Safety
Do not allow aluminum foil, plastic, paper or cloth to
come in contact with a hot surface element, burner or
grate. Do not allow pans to boil dry.
If the cooktop is near a window, forced air vent or fan, be
certain that flammable materials such as window
coverings do not blow over or near the burners or
elements. They could catch on fire.
Always have a working smoke detector near the kitchen.
Never leave the cooktop unattended when in use.
Boilovers cause smoking and greasy spillovers may
ignite.
WARNING
TO REDUCE THE RISK OF A GREASE FIRE:
a.
Never leave surface units unattended at high settings.
Boilovers cause smoking and greasy spillovers that
may ignite. Heat oils slowly on low or medium settings.
b.
Always turn hood ON when cooking at high heat or
when flambéing food (i.e. Crepes Suzette, Cherries
Jubilee, Peppercorn Beef Flambé).
c.
Clean ventilating fans frequently. Grease should not be
allowed to accumulate on fan or filter.
d.
Use proper pan size. Always use cookware
appropriate for the size of the surface element.
In the event that personal clothing or hair catches fire,
drop and roll immediately to extinguish flames.
Have an appropriate fire extinguisher available, nearby,
highly visible and easily accessible near the appliance.
Smother flames from food fires other than grease fires
with baking soda. Never use water on cooking fires.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:
a.
SMOTHER FLAMES with a close-fitting lid, cookie
sheet, or metal tray, then turn off the burner. BE
CAREFUL TO PREVENT BURNS. If the flames do not
go out immediately, EVACUATE AND CALL THE FIRE
DEPARTMENT.
b.
NEVER PICK UP A FLAMING PAN – You may be
burned.
c.
DO NOT USE WATER, including wet dishcloths or
towels – a violent steam explosion will result.
d.
Use an extinguisher ONLY if:
- You know you have a Class ABC extinguisher, and
you already know how to operate it.
- The fire is small and contained in the area where it
started.
- The fire department is being called.
- You can fight the fire with your back to an exit.
Whenever possible, do not operate the ventilation system
during a cooktop fire. However, do not reach through fire
to turn it off.
Cooking Safety
WARNING
Use this appliance only for its intended use as described
in this manual. NEVER use this appliance as a space
heater to heat or warm the room. Doing so may result in
overheating the appliance. Never use the appliance for
storage.
WARNING
If AutoChef® is not working properly, overheating may
result causing smoke and damage to the pan.
WHEN COOKING WITH AUTOCHEF® OBSERVE THE FOLLOWING:
▯ Use a system pan only
▯ Always put the pan in the center of the heating element
▯ Do not place a lid on the pan
▯ Never leave frying fat unattended
Never use the appliance if liquids or foods have spilled
around the control panel. Always turn off the cooktop
and dry the control panel.
Injury and damage to the appliance may occur if control
elements are not used properly.
If the cooktop turns off automatically and can no longer
be operated, it may turn itself on unintentionally at a later
point. Switch off the circuit breaker in the fuse box.
Contact Customer Support for service.
5
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Burn Prevention
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS - Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not
touch, or let clothing, potholders, or other flammable
materials contact surface units or areas near units until
they have had sufficient time to cool. Among these areas
are the cooktop and areas facing the cooktop.
Do not heat or warm unopened food containers. Build-up
of pressure may cause the container to burst and cause
injury.
Always use dry potholders. Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
Always turn hood ON when cooking at high heat or when
flambéing food (i.e. Crêpes Suzette, Cherries Jubilee,
Peppercorn Beef Flambé).
Use high heat settings on the cooktop only when
necessary. To avoid bubbling and splattering, heat oil
slowly, on no more than a low-medium setting. Hot oil is
capable of causing extreme burns and injury.
Never move a pan of hot oil, especially a deep fat fryer.
Wait until it is cool.
Secure all loose garments, etc., before beginning. Tie
long hair so that it does not hang loose, and do not wear
loose-fitting clothing or hanging garments, such as ties,
scarves, jewelry, or dangling sleeves.
WARNING
RISK OF BURNS
Metallic objects become hot very quickly on the cooktop.
Never set down metallic objects such as knives, forks,
spoons and lids on the cooktop.
WARNING
RISK OF BURNS
The pan detection shut-off feature may not turn off the
cooking zone due to spilled food or objects placed on
the cooktop.
If the display does not work when a cooking area is
heating up, disconnect the circuit breaker or fuse in the
electrical panel. Contact an authorized servicer.
Child Safety
When children become old enough to use the appliance,
it is the responsibility of the parents or legal guardians to
ensure that they are instructed in safe practices by
qualified persons.
Do not allow anyone to climb, stand, lean, sit, or hang on
any part of an appliance, especially a door, warming
drawer, or storage drawer. This can damage the
appliance, and the unit may tip over, potentially causing
severe injury.
Do not allow children to use this appliance unless closely
supervised by an adult. Children and pets should not be
left alone or unattended in the area where the appliance
is in use. They should never be allowed to play in its
vicinity, whether or not the appliance is in use.
CAUTION
Items of interest to children should not be stored in an
appliance, in cabinets above an appliance or on the
backsplash. Children climbing on an appliance to reach
items could be seriously injured.
Cleaning Safety
Do not clean the appliance while it is still hot. Some
cleaners produce noxious fumes when applied to a hot
surface. Wet clothes and sponges can cause burns from
steam.
Do not use steam cleaners to clean the appliance.
Cookware Safety
Hold the handle of the pan when stirring or turning food.
This helps prevent spills and movement of the pan.
Use Proper Pan Size.
The use of undersized cookware will expose a portion of
the heating element or burner to direct contact and may
result in ignition of clothing. Select cookware having flat
bottoms large enough to cover the surface heating unit.
This appliance is equipped with one or more surface
units of different sizes. Proper relationship of cookware to
heating element or burner will also improve efficiency.
Cookware not approved for use with ceramic cooktops
may break with sudden temperature changes. Use only
pans that are appropriate for ceramic induction
cooktops.
Always position handles of utensils inward so they do not
extend over adjacent work areas, burners, or the edge of
the cooktop. This reduces the risk of fires, spills and
burns.
WARNING
RISK OF INJURY
When cooking with a double-boiler, the cooktop and
cooking vessel may crack due to overheating. The
cooking vessel in the double-boiler must not come in
direct contact with the bottom of the pot filled with water.
Use only heat-resistant cookware.
WARNING
DANGER OF INJURY
Cookware may jump upward due to fluid trapped
between the cookware bottom and cooking zone. Always
keep cooking zone and cookware bottom dry.
6
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Proper Installation and Maintenance
Have the installer show you the location of the circuit
breaker or fuse. Mark it for easy reference.
This appliance must be properly installed and grounded
by a qualified technician. Connect only to properly
grounded outlet. Refer to Installation Instructions for
details.
This appliance is intended for use up to a maximum
height of 13,100 feet (4,000 meters) above sea level.
This appliance is intended for normal family household
use only. It is not approved for outdoor use. See the
Statement of Limited Product Warranty. If you have any
questions, contact the manufacturer.
Do not store or use corrosive chemicals, vapors,
flammables or nonfood products on or near this
appliance. It is specifically designed for use when
heating or cooking food. The use of corrosive chemicals
in heating or cleaning will damage the appliance and
could result in injury.
Do not operate this appliance if it is not working properly,
or if it has been damaged. Contact an authorized
servicer.
Do not cook on a broken cooktop. Cleaning solutions
and spillovers may create a risk of electric shock.
Do not repair or replace any part of the appliance unless
specifically recommended in this manual. Refer all
servicing to a factory authorized service center.
To avoid electrical shock hazard, before servicing the
appliance, switch power off at the service panel and lock
the panel to prevent the power from being switched on
accidentally.
CAUTION
Persons with a pacemaker or similar medical device
should exercise caution when standing near an induction
cooktop while it is in use. Consult your doctor or the
manufacturer of the pacemaker or similar medical device
for additional information about its effects with
electromagnetic fields from an induction cooktop.
Cooling fan
The cooktop is equipped with a cooling fan on its
underside. Should the cooktop lie above a drawer, there
must be no objects or paper in it. They may be sucked in
and compromise the cooling of the appliance or damage
the fan.
There must be a minimum distance of ¾" (20mm)
between the content of the drawer and the fan input.
Proposition 65Warning:
This product may contain a chemical known to the State
of California, which can cause cancer or reproductive
harm. Therefore, the packaging of your product may
bear the following label as required by California:
67$7(2)&$/,)251,$352326,7,21:$51,1*
:$51,1*
&DQFHUDQG5HSURGXFWLYH+DUPZZZ3:DUQLQJVFDJRY
Electromagnetic interference
WARNING
This induction cooktop generates and uses ISM
frequency energy that heats cookware by using an
electromagnetic field. It has been tested and complies
with Part 18of the FCC Rules for ISM equipment. This
induction cooktop meets the FCC requirements to
minimize interference with other devices in residential
installation. Induction cooktops may cause interference
with television or radio reception. If interference occurs,
the user should try to correct the interference by:
▯ Relocating the receiving antenna of the radio or
television.
▯ Increasing the distance between the cooktop and the
receiver.
▯ Connecting the receiver into an outlet different than the
cooktop.
It is the user’s responsibility to correct any interference.
7
Causes of damage
NOTICES
▯ Scratches on glass ceramic surface: Cookware with
rough bottoms will scratch the glass ceramic surface.
▯ Salt, sugar and sand: Salt, sugar or grains of sand will
scratch the glass ceramic surface. Never use the
cooktop as a working surface or for setting things
down.
▯ Overheated cookware: Avoid heating pots or pans
that are empty.
▯ Hot cookware: Never set down hot pans and pots on
the control panel or frame. This may cause damage.
Protecting the Environment
Energy-saving Advice
▯ Place a lid on cookware. Cooking with an uncovered
pan will result in a considerable increase in energy
use. Use a glass lid to provide visibility and avoid
having to lift the lid.
▯ Use cookware equipped with a solid, flat bottom.
Curved pan bases increase energy consumption.
▯ The diameter of the pan base must match the size of
the element. Note: The manufacturer normally
▯ Hard and sharp objects: Hard or sharp objects falling
on the cooktop may damage it.
▯ Boiled-over food: Sugar and products containing
sugar may damage the cooktop. Immediately eliminate
spills of these products with a glass scraper.
▯ Foils and plastics: Aluminum foil and plastic will melt
on the hot cooking zones. Stove protective film isn't
suitable for your cooktop.
▯ Unsuitable cleaning agent: Shimmering metallic
discolorations on the glass ceramic surface result from
the use of inappropriate cleaning agents and abrasion
from cookware.
indicates the pan's upper diameter. This is normally
greater than the diameter of the pan's base.
▯ Choose cookware of a size suited to the amount of
food you are going to cook. A large pan that is only
half full will use a lot of energy.
▯ Use a small amount of water when cooking. This
saves energy, and vegetables retain a larger
percentage of their vitamins and minerals.
▯ Select the lowest power level to maintain cooking. If
the power level is too high, energy is wasted.
Cooking with Induction
Advantages of induction cooking
Induction cooking is very different from traditional
cooking methods, as heat builds up directly in the item of
cookware. This offers numerous advantages:
▯ Saves time when boiling and frying.
▯ Saves energy.
▯ Easier to care for and clean. Spilled food does not
burn on as quickly.
▯ Heat control and safety – the cooktop increases or
decreases the heat supply as soon as the user
changes the setting. The induction element stops the
heat supply as soon as the cookware is removed from
the element, without having to switch it off first.
Cookware
Only use ferromagnetic cookware for induction cooking,
such as:
▯ Cookware made from enameled steel
▯ Cookware made from cast iron
▯ Special induction-compatible cookware made from
stainless steel.
To check whether your cookware is suitable for induction
cooking, refer to the section on ~ "Suitability test of
cookware".
To achieve a good cooking result, the ferromagnetic area
on the base of the pan should match the size of the
element. If an element does not detect an item of
cookware, try placing it on another element with a
smaller diameter.
FP
LQ
FP
LQ
FP
LQ
8
Some induction cookware does not have a fully
ferromagnetic base:
▯ If the base of the cookware is only partially
ferromagnetic, only the area that is ferromagnetic will
heat up. This may mean that heat will not be
distributed evenly. The non-ferromagnetic area may
not heat up to a sufficient temperature for cooking.
▯ The ferromagnetic area will also be reduced if the
material of which the base of the cookware is made
contains aluminum, for example. This may mean that
the cookware will not become sufficiently hot or even
that it will not be detected.
A cookware set specifically suited for use with induction
cooktops can be purchased as an optional accessory
from specialist retailers, online at the Bosch e-Shop or
from Customer Support.
Order the relevant reference number: HEZ390042
The set contains the following pieces:
▯ Saucepan 6¼" (16 cm)
▯ Pot 6¼" (16 cm)
▯ Pot 8¾" (22 cm)
▯ Pot 9½" (24 cm)
Unsuitable cookware
Do not ever use adapter plates for induction or cookware
made of:
▯ Traditional stainless steel
▯ Glass
▯ Clay
▯ Copper
▯ Aluminum
Properties of the base of the cookware
The material(s) of which the base of the cookware is
made can affect the cooking result. Using pots and pans
made from materials that distribute heat evenly through
them, such as stainless-steel pans with a three-layer
base, saves time and energy.
Use cookware with a flat base; if the base of the
cookware is uneven, this may impair the heat supply.
No pan or improper size
If no pan is placed on the selected element, or if it is
made of unsuitable material or is not the correct size, the
power level displayed on the element indicator will flash.
Place a suitable pan on the element to stop the flashing.
If you take longer than 90seconds to place a suitable
pan on the element, it will automatically turn off.
Empty pans or pans with a thin base
Do not heat up empty pans, or use pans with a thin base.
The cooktop is equipped with an internal safety system.
However, an empty pan may heat up so quickly that the
"automatic shut-off" function may not have time to react,
and the pan may reach very high temperatures. The pan
base could melt and damage the cooktop glass. In this
case, do not touch the pan and switch the cooktop off. If
the cooktop fails to work after it has cooled down, please
contact Customer Support.
Pan detection
Each element has a lower limit for pan detection. This
depends on the diameter of the ferromagnetic area of the
cookware and the material of which its base is made. For
this reason, you should always use the element that best
matches the diameter of the base of the pan.
Automatic detection in double and triple cooking zones
These cooking zones can detect cookware of different
sizes. Depending on the material and the properties of
the cookware, the cooking zone automatically activates
the singe, double or triple cooking zone, supplying the
proper power to obtain good cooking results.
9
Getting familiar with the appliance
In this section we describe the control panel, elements
and displays.
Page 2contains a list of models and dimensions.
Control Panel
!
KRRG
KRRG
FRQWURO
OLJKW
SDQHO
ORFN
Touch keys
#
ø
0 1 & 2&... 8& 9
Main switch
Select cooking zone
Settings area
panel lock Panel lock / Wipe protection
speed boost
SpeedBoost® and ShortBoost
function
auto chef
AutoChef® frying function
keep warm Keep warm function
kitchen timer Kitchen timer function
cook timer Cook timer function
count up timer Count up timer function
hood control Hood control function
hood light Hood light control
Display icons
‹
‚-Š
•/œ
›.
˜›.
Cooktop ready
Power level
Residual heat
SpeedBoost® function
ShortBoost function
Note: Depending on the appliance model, individual details and colors may differ.
pp
DXWR
NHHS
FKHI
ZDUP
(
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
FRXQWXS
WLPHU
Display icons
é
–©
‹‹
ö / ô
y
>
Š
D
>
AutoChef® function
Keep Warm function
Timer value
Timer indicators
Cook timer
Wipe protection
Panel lock
Wi-Fi
Automatic hood control
Touch controls
When the cooktop heats up, the indicators above the
keys available at this time light up.
Touching a key activates the respective function.
Notes
▯ The indicators above the corresponding keys light up
only if they are available.
The displays for the cooking zones or the selected
functions get brighter.
▯ Always keep the control panel clean and dry. Moisture
can prevent it from working properly.
Cooking zones
Cooking Zone
Single cooking zone Use cookware of suitable size.
$
Triple cooking zone The cooking zone switches on automatically when you use cookware with a base that
ò
covers the outer edge of the zone (ð or ò).
Use only cookware suitable for induction cooking; see the section ~ "Cooking with Induction"
10
Residual heat indicator
The cooktop has a residual heat indicator for each
cooking zone. This indicates that a cooking zone is still
hot. Do not touch a cooking zone while the residual heat
indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
▯ Display •: High temperature
▯ Display œ: Low temperature
Operation
If you remove the cookware from the cooking zone
during cooking, the residual heat indicator and the
selected heat setting will flash alternately.
When the cooking zone is switched off, the residual heat
indicator will light up. Even after the cooktop has been
switched off, the residual heat indicator will stay lit for as
long as the cooking zone is still warm.
Main power switch
Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
When you first switch on the appliance, you will be
prompted to set up Home Connect. The
D display icon
will light up dimly for a few seconds on the control panel.
To begin setting up the connection, touch the
D display
icon and proceed in accordance with the information
given in the section entitled ~ "Home Connect". To exit
initial set-up, touch any touch key.
To turn the cooktop on, touch the # symbol. An audible
signal will sound. The symbols for the cooking zones and
the functions available at this time will light up. ‹.‹ will
light up next to the cooking zones. The cooktop is ready
to use.
To turn the cooktop off, touch and hold the # symbol
until all indicators go out. The residual heat indicator will
remain lit until the cooking zones have cooled down
sufficiently.
Notes
▯ If the appliance has not been connected to your home
network or the connection has been interrupted,
Home Connect initial set-up will be activated whenever
you switch on the cooktop.
▯ The cooktop switches off automatically if all the
cooking zones have been switched off for a few
seconds.
▯ The settings are stored for 4seconds after the
cooktop has been turned off. If you turn the cooktop
back on during this time, the cooktop will continue
using the stored settings.
Setting a Cooking Zone
Set the desired power level using the ò to ê symbols.
Power level ò = lowest power level
Power level ê = highest power level
Every power level has an intermediate setting. This is
marked in the control panel with the Ø symbol.
Notes
▯ To protect the fragile parts of your appliance from
overheating and electrical overloading, the cooktop
may temporarily reduce the power automatically.
▯ In order to prevent the appliance from producing
excess noise, the cooktop may temporarily reduce the
power automatically.
Selecting a cooking zone and power level
The cooktop must be turned on.
1.
Touch the { symbol for the desired cooking zone.
The ‹.‹ display gets brighter.
2.
Select the desired power level from the settings range.
The power level is set.
Changing the power level
Select the cooking zone and then set the desired power
level in the control panel.
Turning off the cooking zone
Select the cooking zone and set the power level to 0. The
cooking zone is turned off and the residual heat indicator
is displayed.
Notes
▯ If there is no cookware on the induction cooking zone,
the heat setting display blinks. After 30 seconds, the
cooking zone will switch itself off.
▯ If cookware has been placed on the cooking zone
before you turn on the cooktop, it will be detected
within 20 seconds after you have touched the main
switch and the cooking zone will be selected
automatically. Once detected, set the power level
within the next 20 seconds, otherwise the cooking
zone will turn off.
Even if there are several pots and pans on the cooktop
when it is switched on, only one piece of cookware is
detected.
11
Recommendations
▯ When heating up puree, cream soups and thick
sauces, stir occasionally.
▯ Set heat setting 8to 9for preheating.
▯ When cooking with the lid on, turn the heat setting
down as soon as steam escapes between the lid and
the cookware.
▯ After cooking, keep the lid on the cookware until you
serve the food.
▯ To cook with the pressure cooker, observe the
▯ Do not cook food for too long, otherwise the nutrients
will be lost. The kitchen timer can be used to set the
optimum cooking time.
▯ For healthier cooking results, oil or grease should not
be heated until it smokes.
▯ To brown food, fry small portions in succession.
▯ Cookware may reach high temperatures while the food
is cooking. We recommend that you use pot holders.
▯ You can find recommendations for energy-efficient
cooking in section ~ "Protecting the Environment"
manufacturer's instructions.
Settings table
The following table provides some examples. Cooking
times may vary depending on the type of food, its weight
and quality. Deviations are therefore possible.
9 CAUTION
During cooking, stews or liquids, such as soups,
sauces or drinks can heat up very quickly and
overflow or spatter. For this reason, we recommend
that you stir continuously, gradually heating the food
at a suitable power level.
Power levels
Melting
chocolate 1.5
butter 1.0- 2.0
Heating
frozen vegetables, e.g. spinach 2.5- 3.5
broth 7.0- 8.0
thick soup 1.5- 2.5
milk** 1.0- 2.0
Simmering
delicate sauce e.g. Béchamel sauce 4.0- 5.0
spaghetti sauce 2.0- 3.0
pot roast 4.0- 5.0
fish** 4.0- 5.0
Cooking
rice (with double amount of water) 2.0- 3.0
potatoes bolied in thier skins (with 1-2cups of water) 4.0- 5.0
boiled potatoes (with 1-2cups of water) 4.0- 5.0
fresh vegetables (with 1-2cups of water) 2.0- 3.5
frozen vegetables (with 1-2cups of water) 3.5- 4.5
pasta (with 2-4qt. water)* 6.0- 7.0
pudding** 1.0- 2.0
cereals 2.0- 3.0
Frying
pork chop 5.5- 6.5
chicken breast 5.0- 6.0
bacon 6.0- 7.0
eggs 5.0- 6.0
fish 5.0- 6.0
pancakes 6.0- 7.0
12
Power levels
Deep fat frying** (in 1-2 qt. oil)
deepfrozen foods, e.g. chicken nuggets (0.5lb per serving) 8.0- 9.0
other, e.g. doughnuts (0.5lb per serving) 4.5- 5.5
Keep warm
tomato sauce 1.5
* ongoing cooking without lid
** without lid
Cook Timer
The element automatically switches off after the set time
has elapsed.
Setting procedure:
1.
Select the cooking zone and the required power level.
2.
Touch the cook timer key. The ‹‹ symbol and theV indicator light up in the cook timer display.
y lights up in the display for the cooking zone.
DXWR
NHHS
FKHI
ZDUP
VSHHG
NLWFKHQ
FRRN
3.
Within the next 10 seconds, set the required cooking
ERRVW
WLPHU
time using the number keys.
WLPHU
FRXQWXS
WLPHU
Changing or deleting the time
Select the cooking zone and then touch the cook timer
key.
Change the cooking time using the number keys or set
‹‹ to delete the programmed cooking time.
Touch the cook timer key to confirm the selected setting.
When the time has elapsed
The cooking zone switches off, the y display flashes
and the cooking zone switches to power level ‹‹. An
acoustic signal sounds.
‹‹ and the V indicator flash in the timer display.
When the y symbol is touched, the indicators go out
and the acoustic signal ceases.
Notes
▯ To set a cooking time of under 10minutes, always
touch 0 before you select the required value.
▯ If a cooking time was set for several cooking zones,
the time information for the selected cooking zone is
shown in the timer display.
▯ Select the relevant cooking zone to call up the
remaining cooking time.
▯ You can set a cooking time of up to ŠŠ minutes.
DXWR
NHHS
FKHI
ZDUP
VSHHG
NLWFKHQ
FRRN
4.
Touch the cook timer key to confirm the selected
ERRVW
WLPHU
WLPHU
FRXQWXS
WLPHU
setting.
The cooking time begins to elapse. Note: The same cooking time can be set automatically
for all cooking zones. The set time for each of the
cooking zones counts down independently.
You can find information on automatically programming
the cooking time in section ~ "Basic settings"
Using Cook timer with AutoChef
®
When you are cooking with AutoChef® the programmed
cooking time will begin to count down once the
temperature for the selected frying level has been
reached.
Kitchen Timer
The Kitchen Timer can be set for periods of up to
ŠŠ minutes. It is independent of the other settings. You
can also use the kitchen timer when the cooktop is
turned off or locked.
This function does not automatically switch off a cooking
zone.
Setting procedure
1.
Touch the kitchen timer key. The ‹‹ symbol and the
V indicator light up in the timer display.
2.
Select the required time on the control panel and touch the kitchen timer key to confirm.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the kitchen timer key.
Change the programmed time using the number keys or
set ‹‹ to delete the programmed time.
Touch the kitchen timer key to confirm the selected
setting.
13
When the time has elapsed
An audible signal sounds once the time has elapsed.
and the
V symbol flash in the timer display.
‹‹
The indicators go out after touching the kitchen timer
key.
Count Up Timer
The count up timer function displays the time that has
elapsed since activation.
This functions independently from the cooking zones and
from other settings. This function does not automatically
switch off a cooking zone.
Activating Touch the count up timer key. The ‹‹ symbol and the
V indicator light up in the timer display.
The time begins to count up.
ShortBoost function
The ShortBoost function enables you to heat cookware
faster than when using heat setting
After deactivating the function, select the appropriate
heat setting for your food.
This function can be activated for a cooking zone at any
time, provided the other cooking zone in the same group
is not in use (see illustration).
Š.
Deactivating
Touching the count up timer key turns off the stopwatch
function. The timer displays remain lit.
If you touch the count up timer key again, the displays
go out.
The function is deactivated.
SpeedBoost® function
The SpeedBoost® function enables you to heat up large
quantities of water faster than when using heat setting Š.
This function can be activated for a cooking zone at any
time, provided the other cooking zone in the same group
is not in use (see illustration).
Activating
1.
Select a cooking zone.
2.
Touch the speed boost key.
The ›. indicator lights up.
The function is activated.
Deactivating
1.
Select a cooking zone.
2.
Touch the speed boost key.
The ›. display goes out and the cooking zone
switches back to power level Š.
The function is deactivated. Note: In certain circumstances, the SpeedBoost®
function can switch itself off automatically in order to
protect the electronic elements inside the cooktop.
Recommendations for use
▯ Always use cookware that has not been pre-heated.
▯ Use pots and pans with a flat base. Do not use
containers with a thin base.
▯ Never leave empty cookware, oil, butter or lard to heat
up unattended.
▯ Do not place a lid on the cookware.
▯ Place the cookware on the center of the element.
Ensure that the diameter of the base of the cookware
corresponds to the size of the element.
▯ You can find information on the type, size and
positioning of the cookware in section ~ "Cooking
with Induction"
Activating
1.
Select a cooking zone.
2.
Touch the speed boost key twice.
The ˜›Ú indicator lights up.
The function is activated.
Deactivating
1.
Select a cooking zone.
2.
Touch the speed boost key.
The ˜›Ú display goes out and the cooking zone
switches back to power level Š.
The function is deactivated. Note: After 30 seconds, this function will automatically
switch off.
14
Keep Warm function
This function is suitable for melting chocolate or butter
and for keeping food warm.
Activating
1.
Select the required cooking zone.
2.
Within the next 10seconds, touch the keep warm key.
The
–© indicator lights up.
The function is activated.
Deactivating
1.
Select the cooking zone.
2.
Touch the keep warm key.
The –© display goes out. The cooking zone switches
itself off and the residual heat indicator appears.
The function is deactivated.
AutoChef
This function can be used to fry food while maintaining
the suitable frying pan temperature.
The cooking zones that have this function are identified
by the AutoChef® symbol.
Advantages when frying
▯ The cooking zone only heats up if this is required to
maintain the temperature. This saves energy and
prevents the oil or fat from overheating.
▯ The AutoChef
pan has reached the optimum temperature for adding
oil and then for adding the food.
Notes
▯ Do not place a lid on the pan. Otherwise, the function
does not activate correctly. You can use a splash
guard to prevent splashes of grease.
▯ Use oil or grease that is suitable for deep fat frying. If
butter, margarine, extra virgin olive oil, or lard is used,
use heat setting 1 or 2.
▯ Never leave a frying pan, with or without food,
unattended when it is being heated.
▯ If the temperature of the cooking zone is higher than
that of the cookware or vice-versa, the frying sensor is
not activated correctly.
®
®
function reports when the empty frying
Frying pans for AutoChef
®
Frying pans specifically suited for use with the AutoChef®
function can be purchased as an optional accessory
from specialist retailers, online at the Bosch e-Shop or
from Customer Support.
Order the relevant reference number:
▯ HEZ3902106" (15 cm) frying pan.
▯ HEZ3902308¼" (21 cm) frying pan.
▯ HEZ3902207" (18 cm) frying pan.
These frying pans have a non-stick coating so that you
can fry food with only a small amount of oil.
9 CAUTION
▯ The AutoChef
®
function was programmed
especially for these types of frying pans.
▯ Other frying pans may overheat. The temperature
can be set higher or lower. Try the lowest heat
setting first and then change it according to your
requirements.
▯ Make sure that the diameter of the base of the
frying pan corresponds to the size of the cooking
zone. Place the pan in the center of the cooking
zone.
▯ If a different type of pan is used, try it first at the
lowest frying level, adjusting it as required. The
pans may overheat.
Frying levels
Setting Temperature Suitable for
1 Very low Preparing and reducing sauces, sweating vegetables and frying food in extra virgin olive
oil, butter or margarine.
2 Low Frying food using extra virgin olive oil, butter or margarine, e.g. omelettes, French toast,
hash browns.
3 Medium – low Frying fish, pancakes and thick food such as Hamburgers or pork chops.
4 Medium – high Frying ground meat, vegetables or thin slices of meat, e.g. veal cutlet.
5 High Frying food at high temperatures, e.g. steaks medium rare or fried cooked potatoes.
15
AutoChef® Frying Chart
The following chart lists which frying level is ideal for
particular foods. Frying time may depend on the type,
weight and quality of the food product.
Meat
Pork chop, boneless or bone-in (1" thick)
Veal cutlet in breadcrumb (5/8" thick)
Fillet (1" thick)
Cordon bleu
Beef steaks medium rare (_" thick)
Beef steaks medium or well done (_" thick)
Chicken breast (1" thick)
Skillet-fried chicken
Sausages, e.g. hot dogs (ø
Hamburger
Thin slices of meat
Ground meat
Bacon
Fish
Fish, fried (whole)
Fish fillet with or without breadcrumbs
Shrimp
Egg dishes
Pancakes
Omelettes
Fried eggs
Scrambled eggs
French toast
Potatoes
Fried cooked potatoes
Fried raw potatoes
Hash browns
Vegetables
Garlic/onions
Squash, eggplant
Mushrooms
Stir-fried vegetables
Frozen products
Chicken nuggets, chicken patties
Cordon bleu
Chicken breast
Fish fillet in breadcrumbs
Fish sticks
Oven French fries
Stir-fried vegetables
Spring rolls/eggrolls (_ - 1]" thick)
* Place in cold pan
^ - 1X")
The frying levels provided are designed for the system
pan. Frying levels may vary when using other frying pans.
Frying level Total frying time from signal
3
4
4
3
5
4
2
2
3
3
4
4
2
3
3/4
4
3
2
2
2
2
5
3
2
1/2
3
4
4
4
2
3
3
4
5
2
3
10- 17min
6- 10min
6- 10min
15- 20min
8- 10min
8- 12min
20- 30min
25- 35min
8- 20min
6- 12min
7- 12min
6- 10min
5- 8min
15- 25min
10- 20min
4- 8min
continuous frying
continuous frying
2- 6min
2
- 4min
continuous frying
6- 12min
15- 25min
20- 30min
2- 10min
4- 12min
10- 15min
10- 12min
8- 15min
10- 30min
10- 30min
10- 20min
8- 12min
4- 6min
8- 15min
10- 30min
16
Sauces
Tomato sauce with vegetables
Béchamel sauce
Cheese sauce, e.g. Gorgonzola sauce
Reducing sauces, e.g. Bolognese sauce, tomato sauce
Desert sauces, e.g. orange sauce
Ready-made meals
Potato products, e.g. fried potatoes
Potato products, e.g. hash browns
Pasta (with added water)
Misc.
Baked camembert/baked cheese
Roast almonds, nuts, pine kernel*
* Place in cold pan
Frying level Total frying time from signal
1
1
1
1
1
3
2
2
3
2
25- 35min
10- 20min
10- 20min
25- 35min
15- 25min
10- 15min
10- 20min
4- 6min
7- 10min
3- 7min
Setting procedure
Select the appropriate temperature setting from the table.
Place the empty cookware on the cooking zone.
1.
Select the cooking zone. Touch auto chef. é lights up in the cooking zone display.
p
KRRG
KRRG
FRQWURO
OLJKW
2.
Within the next 10 seconds, select the required
DXWR
NHHS
FKHI
ZDUP
temperature setting from the settings range.
KRRG
KRRG
FRQWURO
OLJKW
DXWR
NHHS
FKHI
ZDUP
Switching off AutoChef
®
Select the cooking zone and set it to ‹.‹ in the settings
range. The cooking zone switches itself off and the
residual heat indicator appears.
Panel Lock
You can use the panel lock to prevent children from
accidentally turning the appliance on.
Activating and deactivating the panel lock
The cooktop must be turned off.
To activate:
1.
Switch on the cooktop using the main switch.
2.
Touch the panel lock key for approx. 4seconds.
The D indicator lights up for 10seconds.
The cooktop is locked.
To deactivate:
1.
Switch on the cooktop using the main switch.
2.
Touch the panel lock key for approx. 4seconds.
The lock is released.
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you turn off the cooktop.
Activating and deactivating
You can find out how to activate the automatic Panel
Lock in the section entitled ~ "Basic settings"
The function has now been activated.
The é temperature symbol flashes until the frying
temperature is reached. A signal sounds and the
temperature symbol goes out.
3.
Once the frying temperature has been reached, add the fat and then the food to the pan.
Note: Turn the food so that it does not burn.
17
Wipe Protection
If you wipe over the control panel while the cooktop is
switched on, settings may be changed. To avoid doing
this, you can use the cooktop's "Lock control panel for
cleaning" function.
To switch on: Touch the panel lock touch key. An audible
signal sounds. The control panel is locked for
35 seconds. You can now wipe over the surface of the
control panel without changing any settings.
To deactivate: The control panel will be unlocked once
35seconds have elapsed. To release the function early,
touch the panel lock touch key.
Notes
▯ An audible signal sounds 30seconds after activation.
This indicates that the function is about to finish.
▯ The wipe protection function does not lock the main
switch. The cooktop can be switched off at any time.
Basic settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Indicator/
symbol
Function
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating. ”‰ and the residual heat
indicator
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1to 10hours).
•/œ flash alternately in the display.
™‚
™ƒ
™„
™†
™‡
Panel lock
‹Manual*.
‚ Automatic.
ƒFunction deactivated.
Signal tones
‹ Confirmation and error signals are switched off.
‚ Only the error signal is switched on.
ƒ Only the confirmation signal is switched on.
„ All signal tones are switched on.*
Display energy consumption
‹ Deactivated.*
‚ Activated.
Automatically setting the cooking time
‹‹ Switched off.*
‹‚-ŠŠ Time until automatic switch-off.
Audible signal duration for the timer function
‚10seconds.*
ƒ 30seconds.
„ 1minute.
18
Power management function. Limiting the total power of the cooktop
The available settings depend on the maximum power of the cooktop.
‹ Deactivated. Maximum power of the cooktop. */**
‚ 1000W minimum power.
‚.1500W
...
„3000W recommended for 13A.
„.3500W recommended for 16A.
…4000W
….4500W recommended for 20A.
...
™ˆ
Š or Š.Maximum power of the cooktop.**
Check the cookware and the cooking results
‹Not suitable
‚Not perfect
™‚ƒ
ƒSuitable
Restore to standard settings
‹Individual settings.*
™‹
*Factory setting
**The cooktop's maximum power output is shown on the rating label.
--------
‚Restore factory settings.
To access the basic settings:
The cooktop must be switched off.
1.
Turn on the cooktop.
2.
Within10seconds, touch the kitchen timer key for
about 4 seconds.
The first four displays provide product information.
Touch the settings area to view the individual displays.
Product information Display
screen
Customer service index (CSI)
FD number
FD number 1
FD number 2
3.
Touching the kitchen timer key again takes you to the
‹‚
”š
Š†.
‹.†
basic settings.
™‚ and ‹ light up as a default in the displays.
DXWR
NHHS
FKHI
ZDUP
4.
Touch the kitchen timer key repeatedly until the desired function is displayed.
5.
Select the desired setting from the settings area.
DXWR
NHHS
FKHI
ZDUP
VSHHG
6.
Touch the kitchen timer key for at least 4 seconds.
ERRVW
NLWFKHQ
WLPHU
The settings have been saved.
Quit basic settings
Turn the cooktop off with the main switch.
FRRN
WLPHU
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
19
Energy consumption indicator
This function indicates the total amount of energy
consumed by this cooktop the last time it was used for
cooking.
Once switched off, the energy consumption in kWh is
displayed for 10seconds, e.g.
‚.‹‰ kWh.
The accuracy of the information displayed depends on
the voltage quality of the power supply, among other
factors.
You can find out how to turn this function on in the
section on ~ "Basic settings"
Home Connect
Power Manager
You can use the power manager to set the total power of
the cooktop.
The cooktop is preset at the factory. Its maximum
performance is specified on the rating label. You can use
the power manager to change the value in accordance
with the requirements for the relevant electrical
installation.
In order not to exceed this set value, the cooktop
automatically distributes the power available between the
cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached, ¬ appears in the heat setting
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
cooktop is changed, see section ~ "Basic settings"
This appliance is Wi-Fi enabled and settings can be sent
to the appliance via a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as a cooktop
with no network connection. The cooktop can always be
operated via the control panel.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
▯ Cooktops are not designed to be used unattended –
you must always keep an eye on the cooking process.
▯ Ensure that you follow the safety instructions in this
instruction manual and that these are also observed
when operating the appliance via the Home Connect
app. Follow the instructions in the Home Connect app.
▯ Using the Home Connect app, you can send settings
to your appliance, and you must then confirm these on
the appliance. It is not possible to operate the
appliance while you are away from home.
▯ If the appliance is being operated by the controls on
the appliance itself, this mode of operation always has
priority. It is not possible to operate the appliance
using the Home Connect app during this time.
Setting Up
To implement settings via Home Connect, you must have
installed and set up the Home Connect app on your
mobile device.
Refer to the supplied Home Connect documents for
more information.
Follow the steps specified by the app to implement the
settings.
The app must be open in order to perform the setup
process.
Automatic Registration in the Home Network
You require a routher that has WPS functionality. If you
do not have this, follow the steps under “Manually
logging into your home network”.
1.
Turn on the cooktop.
2.
Touch and hold the kitchen timer key for 4 seconds.
The product information is displayed.
3.
Touch the kitchen timer key repeatedly until •’ and
‚ are displayed alternately.
‹ lights up in the cooking zone display.
DXWR
NHHS
FKHI
ZDUP
20
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
FRXQWXS
WLPHU
4.
Set the ‚ value on the control panel.
‚ and the D symbol will flash on the cooking zone
display.
5.
Press the WPS button on the router within the next 2 minutes.
The cooktop is connected to the home network if the
D symbol no longer flashes but is lit up on the
cooking position display. Note: If a connection cannot be established, the
"Connect manually" ƒ value appears. Register the
appliance in the home network manually or try
connecting automatically again.
The appliance automatically tries to connect to the
app, and •’ and ƒ are displayed alternately.The
‚ value flashes on the control panel.
DXWR
NHHS
FKHI
ZDUP
(
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
FRXQWXS
WLPHU
4.
Set the ƒ value on the control panel.
ƒ and the D symbol will flash on the cooking position
display.
DXWR
NHHS
FKHI
ZDUP
5.
Use the "Home Connect" SSID and the "Home Connect" key to register the mobile device on the cooktop network.
(
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
FRXQWXS
WLPHU
6.
Start the app on the mobile device and follow the instructions for automatic network registration.
The registration procedure has been completed once
the ‹ value appears on the cooking position display.
Manual Registration in the Home Network
1.
Turn on the cooktop.
2.
Touch and hold the kitchen timer key for 4 seconds.
The product information is displayed.
3.
Touch the kitchen timer key repeatedly until •’ and
‚ are displayed alternately.
‹ lights up in the cooking zone display.
DXWR
NHHS
FKHI
ZDUP
VSHHG
NLWFKHQ
FRRN
ERRVW
WLPHU
WLPHU
FRXQWXS
WLPHU
The cooktop is connected to the home network if the
D symbol no longer flashes but lights up on the
cooking position display.
The appliance automatically tries to connect to the
app, and •’ and ƒ are displayed alternately. The
‚ value flashes on the control panel.
DXWR
NHHS
FKHI
ZDUP
6.
Start the app on the mobile device and follow the instructions for manual network registration.
The registration procedure has been completed once
the ‹ value appears on the cooking position display.
(
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
FRXQWXS
WLPHU
21
Loading...