Bosch MVC-FIPM Installation
IP Matrix
MVC-FIPM
en Installation and Operating Manual
IP Matrix |
Table of Contents | en |
3 |
|
|
|
Table of Contents
1 |
Preface |
5 |
1.1 |
About this Manual |
5 |
1.2 |
Conventions in this Manual |
5 |
1.3 |
Intended Use |
5 |
1.4 |
Rating Plate |
5 |
2 |
Product Description |
7 |
2.1 |
System Requirements |
7 |
2.2 |
Overview of Functions |
8 |
|
|
|
3 |
Installation and Configuration |
9 |
3.1 |
IntuiKey |
9 |
3.2 |
BVIP Units |
9 |
3.3 |
Activating a License |
9 |
3.4 |
General |
11 |
3.5 |
Monitors |
12 |
3.6 |
Cameras |
13 |
3.7 |
Camera Tours |
14 |
3.8 |
Softkeys |
15 |
3.9 |
Connecting and Starting the IntuiKey |
16 |
|
|
|
4 |
Operation of IP Matrix using the IntuiKey |
17 |
4.1 |
Connecting |
17 |
4.2 |
Function Keys |
17 |
4.3 |
Switching Camera to Monitor |
18 |
4.4 |
Controlling Cameras |
19 |
4.5 |
Starting and Exiting a Camera Tour |
20 |
4.6 |
Softkeys |
20 |
4.7 |
Alarm |
20 |
4.8 |
Troubleshooting |
21 |
|
|
|
5 |
Index |
23 |
Bosch Security Systems |
Installation and Operating Manual |
F.01U.082.117 | V4.0 | 2008.12 |
4 |
en | Table of Contents |
IP Matrix |
|
|
|
F.01U.082.117 | V4.0 | 2008.12 |
Installation and Operating Manual |
Bosch Security Systems |
IP Matrix Preface | en 5
1 |
Preface |
1.1 |
About this Manual |
|
This manual is intended for persons responsible for the configuration and operation of the |
|
IntuiKey keyboard when used with BVIP units (Bosch Video over IP) and the optional IP Matrix |
|
function. This manual describes the configuration of IP Matrix and the associated |
|
configuration and operation of the IntuiKey keyboard. Relevant knowledge of network |
|
technology is required. |
|
See also the documentation on the IntuiKey keyboard and any other associated units. Read |
|
and pay particular attention to the safety instructions. |
1.2 |
Conventions in this Manual |
|
In this manual, the following symbols and notations are used to draw attention to special |
|
situations: |
CAUTION!
!This symbol indicates that failure to follow the safety instructions described may endanger persons and cause damage to the unit or other equipment.
It is associated with immediate, direct hazards.
NOTICE!
This symbol refers to features and indicates tips and information for easier, more convenient use of the unit.
1.3 |
Intended Use |
|
IP Matrix enables automatic and manual selection and assignment of the cameras and |
|
monitors belonging to a CCTV system via data networks (Ethernet LAN, Internet). To do this, |
|
all cameras and monitors must be connected to BVIP units (Bosch Video over IP). After |
|
completing configuration, all functions are performed using the IntuiKey keyboard, which |
|
must be connected with a BVIP decoder (for example VIP XD). |
|
In the event of questions concerning the use of IP Matrix that are not answered in this manual, |
|
please contact your sales partner or: |
|
Bosch Security Systems |
|
Robert-Koch-Straße 100 |
|
85521 Ottobrunn |
|
Germany |
|
www.bosch-securitysystems.com |
1.4 Rating Plate
For exact identification of the IntuiKey keyboard in use, the model name and serial number are inscribed on the bottom of the housing. Please make a note of this information before installation, if necessary, so as to have it to hand in case of questions or when ordering spare parts.
Bosch Security Systems |
Installation and Operating Manual |
F.01U.082.117 | V4.0 | 2008.12 |
6 |
en | Preface |
IP Matrix |
|
|
|
F.01U.082.117 | V4.0 | 2008.12 |
Installation and Operating Manual |
Bosch Security Systems |
IP Matrix Product Description | en 7
2 |
Product Description |
2.1 |
System Requirements |
Configuration Requirements
–IntuiKey keyboard fully installed and ready for operation
–BVIP decoder with at least firmware 4.0 fully installed and ready for operation
–Computer with Windows 2000 or Windows XP operating system
–Network access (Intranet or Internet)
–Screen resolution 1,024 × 768 pixels
–16or 32-bit color depth
–Installed Sun JVM
–Microsoft Internet Explorer (version 6.0 or higher) or
–Installed Configuration Manager program (version 1.60 or higher)
NOTICE!
Also note the information in the System Requirements document on the product CD supplied. If necessary, you can install the required software and controls from the product CD supplied with the BVIP decoder in use.
You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer.
Operational Requirements
–IntuiKey keyboard fully installed and ready for operation
–BVIP decoder fully installed and ready for operation, includes installed and configured IP Matrix function
Bosch Security Systems |
Installation and Operating Manual |
F.01U.082.117 | V4.0 | 2008.12 |
8 en | Product Description IP Matrix
2.2 Overview of Functions
IP Matrix System
IP Matrix can be used to control IP-based monitoring systems of up to 32 cameras and up to ten monitors via an IntuiKey keyboard without the use of a computer. In normal operation, the system works only via the network connections between IP cameras, encoders and decoders, controlled via the IntuiKey. As part of a larger CCTV system, IP Matrix can be used as a satellite system. The higher-ranking system can access IP Matrix for control purposes. Otherwise, IP Matrix works independently and is completely self-sufficient.
Camera Tours and AutoDome Presets
IP Matrix supports the configuration of up to five predefined camera tours; you can switch these rather than individual cameras to monitors. These tours enable up to ten cameras to be switched in a continuous sequence in accordance with a schedule. AutoDome cameras can be controlled as usual via IntuiKey.Fixed AutoDome positions can be configured in the system as virtual cameras.
Special Functions and Alarm Task Scripting
In addition to providing access to the camera menus, IP Matrix also enables up to eight special functions to be accessed at the touch of a button. These special functions can be configured in the system via Alarm Task Scripting. Alarm Task Scripting can also be used to display camera and encoder alarms on the IntuiKey. In the event of an alarm, the alarm key on the IntuiKey lights up red until the alarm is confirmed by pressing the alarm key. A script can also be configured to trigger a reaction to the alarm when the alarm key is pressed.
Configuration
IP Matrix can be configured with a Web browser on the local network (Intranet) or via the Internet.
Use of a computer is only required for configuring the system or for maintenance purposes.
Summary
IP Matrix provides the following main functions:
–Purely IP-based CCTV matrix system
–Up to 32 cameras, ten monitors and one IntuiKey keyboard
–No computer required to operate system
–Automatic camera tours
–Automatic alarm processing via Alarm Task Scripting
F.01U.082.117 | V4.0 | 2008.12 |
Installation and Operating Manual |
Bosch Security Systems |
Loading...