Bosch MIC-BP3 Installation Manual

MIC-BP3 Bi-Phase Converter Card for
the MIC400 PTZ Camera Series

Bosch Security Systems

EN Installation and Operation Manual

MIC-BP3 Bi-Phase Converter Card | Installation & Operation Manual AAAEN| 2

Bosch Security Systems Issue 1

MIC-BP3 Bi-phase Converter Card

For the MIC400 camera series

Installation and Operation Manual

Chapters

1. Introduction

2. Installation Instructions

3. Technical Specifications

MIC-BP3 Bi-Phase Converter Card | Installation & Operation Manual AAAEN| 3

Introduction...................................................................1-6

Versions................................................................................................. 1-7

Unpacking.............................................................................................. 1-7

Package Contents.................................................................................. 1-8

BP3 Bi-phase Converter Card………………………......2-8

Bi-phase Specifications…………………………………………………….. 2-8
Typical Wiring Example…………………………………………………….. 2-10
Installation of the MIC-BP3 Bi-phase Converter Card…………………... 2-10

Setting the MIC400 address (in hardware)…………………………......... 2-10

MIC400 DIP switch settings………………………………………………... 2-11
Diagram of typical installation……………………………………………… 2-12

Technical Specifications...............................................3-13

Physical dimensions and cable specification……………………………... 3-13

Bosch Security Systems Issue 1

MIC-BP3 Bi-Phase Converter Card | Installation & Operation Manual AAAEN| 4

to persons.

Safety Precautions

The following symbols are used throughout this manual please pay careful
attention to their meaning.

The lightning flash with an arrowhead symbol within a triangle
is intended to alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock

The exclamation point within a triangle is intended to alert the
user to the presence of important safety, operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.

Important Safety Instructions

CAUTION

TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DISCONNECT POWER SUPPLY BEFORE OPENING THE
POWER SUPPLY UNIT.
POWER DISCONNECT: POWER SUPPLY UNITS HAVE
POWER SUPPLIED WHENEVER THE POWER CORD IS
INSERTED INTO THE POWER SOURCE

WARNING

INSTALLATION SHOULD BE CARRIED OUT BY QUALIFIED
PERSONNEL ONLY IN ACCORDANCE WITH THE
APPLICABLE LOCAL CODES.
BOSCH SECURITY SYSTEMS ACCEPTS NO LIABILITY
FOR ANY DAMAGES OR LOSSES CAUSED DUE TO
INCORRECT OR IMPROPER INSTALLATION

1. Read all instructions prior to installation.

2. Keep this manual for future reference.

3. Heed all warnings.

4. Install according to manufacturer’s instructions.

5. Qualified persons only should install this product, if in doubt consult a qualified

installer.

6. Use correct electrostatic discharge handling procedures when handling printed

circuit boards to avoid damage to electro-sensitive components.

7. Do not install near any strong heat sources such as furnaces.

8. Never push objects or pour liquids into the product enclosure as this can cause a

fire or electrical shock hazard.

9. Only use electronic cleaning solvent in the unlikely event of the card requiring

cleaning.

10. Ensure that the product is correctly earthed.

11. Use only the power sources indicated in this user guide and ensure that the

current rating of the supply cable is adequate for the product.

12. Do not overload power supply sockets as this can be a fire or electrical shock

hazard.

13. In the event of failure do not attempt to service this product yourself, please

contact Bosch Security Systems for assistance.

14. Only use approved attachments or accessories specified by the manufacturer. Any

changes or modifications made to the equipment, not expressly approved in writing
by Bosch Security Systems, could prevent proper or safe operation of the product
and will invalidate the warranty.

15. Please dispose of disused electrical & electronic equipment at an environmentally

compatible recycling facility (Please contact Bosch Security Systems for further
details).

Bosch Security Systems Issue 1