Bosch MIC-400 Rwas, Mic-rwb, MIC-500-RWAB, MIC-412-RWAC, MIC-412 Rwab User Manual
...
MIC Series Replacement Wiper
MIC-xxx-RWAy
enInstallation Guide
MIC Series Replacement
Wiper
Table of contents
Table of Contents | en 3
1
2
2.1 Replacing the Wiper-arm assembly (MIC550 and
2.2 Replacing the Wiper-Arm assembly (MIC612,
2.3 Replacing the Wiper-Arm assembly (MIC400) 12
3
MIC Series Cameras - Wiper Replacement 4
Replacing Wiper Assemblies 6
MIC500)
10
MIC440, and MIC412)
Replacing wiper blade (MIC400 Only) 15
6
Bosch Security Systems, Inc. Installation Guide 2013.06 | 1.0 | F.01U.286.905
4 en | MIC Series Cameras - Wiper Replacement
MIC Series Replacement
Wiper
1
MIC Series Cameras - Wiper Replacement
Replacement wiper-arm assemblies are available for MIC series
cameras. All replacement wiper-arm assemblies ship with
replacement washers, spacers and O-rings as required for the
specific unit. These components should always be replaced
when replacing the wiper-arm assembly.
The Replacement Wiper-arm kit (MIC-RWA) is available in
the following finishes for the
MIC400, MIC412, MIC440, MIC500, MIC550, and MIC612
MIC-500-RWAB Replacement wiper-arm assembly for
MIC550 and MIC500
– Black anodized
MIC-412 RWAB Replacement wiper-arm assembly for
MIC412 and MIC612 – Black anodized
MIC-412-RWAC Replacement wiper-arm assembly for
MIC412 and MIC612 - Clear anodized
MIC-400-RWAB Replacement wiper-arm assembly for
MIC400 – Black anodized
MIC-400-RWAC Replacement wiper-arm assembly for
MIC400 – Clear anodized
MIC-400 RWAS Replacement wiper-arm assembly for
MIC400 – Stainless Steel
MIC-RWB Replacement wiper blade for MIC400
2013.06 | 1.0 | F.01U.286.905 Installation Guide Bosch Security Systems, Inc.
MIC Series Replacement
Wiper
Figure 1.1: Wiper Components
MIC Series Cameras - Wiper Replacement | en 5
Component
The MIC Replacement Wiper Arm (RWA)
may include any or all of the following
components:
1 One O-ring (MIC550 and MIC500 only)
2 One replacement wiper-arm with integral blade
3 One wiper-arm retaining screw
4 One or more wiper arm washers
(for MIC550, MIC500, and MIC400 only)
Bosch Security Systems, Inc. Installation Guide 2013.06 | 1.0 | F.01U.286.905
6 en | Replacing Wiper Assemblies
MIC Series Replacement
Wiper
2
2.1
Replacing Wiper Assemblies
Replacing the Wiper-arm assembly (MIC550 and MIC500)
Tools Required
– One T-10 torx
– One 1 mm x 3 mm Phillips screwdriver
Figure 2.1: Preparing for Installation
1. Use the control unit to tilt the camera upward to a 45
degree angle (Figure 2.1).
2. Place a piece of protective material over the window glass
to prevent accidental damage (Figure 2.1).
2013.06 | 1.0 | F.01U.286.905 Installation Guide Bosch Security Systems, Inc.
Loading...