Bosch LHM0606-00-US Specsheet

Communications Systems | LHM 0606/xx Ceiling Loudspeaker

LHM 0606/xx Ceiling Loudspeaker

www.boschsecurity.com

u Suitable for speech and music reproduction

u Flush-mounting in ceiling cavity

u Easy to install

The LHM 0606/xx is a general purpose, 6 W, costeffective ceiling loudspeaker. The /00 version is screw mounted and the /10 version is clamp mounted into the ceiling. An optional fire dome LBC 3080/01 is available.

Functions

An economic flushing-mounting ceiling loudspeaker is available for general purpose applications. This full range loudspeaker is suitable for both speech and music reproduction in shops, department stores, schools, offices, sports halls, hotels and restaurants. The speaker assembly consists of a single-piece, 6W dual cone loudspeaker and frame, with a 100 V, matching transformer mounted on the back. A circular metal grille is an integrated part of the front. The appearance and neutral white color has been selected to be unobtrusive in virtually all interiors.

Certifications and approvals

All Bosch loudspeakers are designed to withstand operating at their rated power for 100 hours in accordance with IEC 268-5 Power Handling Capacity (PHC) standards. Bosch has also developed the Simulated Acoustical Feedback Exposure (SAFE) test

u Simple power setting

u Unobtrusive in virtually all interiors

to demonstrate that they can withstand two times their rated power for short durations. This ensures extra reliability under extreme conditions, leading to higher customer satisfaction, longer operating life, and much less chance of failure or performance deterioration.

Safety acc. to EN 60065

Installation/configuration notes

Mounting

The assembly is simply and quickly installed into a hole in the ceiling cavity. The /00 version is secured with the three white screws (supplied). The /10 version is secured by two integral spring-loaded ceiling locking clamps. A circular template for marking a 165 mm diameter hole is included with the loudspeaker. Three wires on the matching transformer (primary) provide for selection of nominal full-power, half-power or quarter-power radiation.

Fire dome

During a fire, the ceiling cavity in which loudspeakers are installed can allow flames to spread throughout a building. To prevent fire entering the caving via the

120

54.5

70.5

165

199

4.72

6.5

7.8

162

6.3

0.63

2.15

2.77

140

3x 4 , 120°

5.5

0.16

120

0.63

54.5

2.15

70.5

2.77

165

6.5 199

7.8

4.72

1.5W

SPL(dB)

31.5 63 125 250 500 1000 2k 4k 8k 16k 20k (Hz)

10dB

90dB

250 Hz 500 Hz

1000 Hz

2000 Hz 4000 Hz 8000 Hz

0˚

-10

-20

30˚ 30˚

60˚ 60˚

90˚ 90˚

120˚

180˚ 180˚

150˚ 150˚

0˚

| LHM 0606/xx Ceiling Loudspeaker

loudspeaker, the ceiling loudspeaker can be fitted with a protective steel fire dome (LBC 3080/01). This optional fire dome is mounted on the loudspeaker assembly using four self-tapping screws, supplied as standard. There are four knock-out holes; two (2) for rubber grommets (supplied) and two (2) for cable glands. (PG13).

LHM 0606/00 Dimensions in mm / inch

Polar diagram (measured with pink noise)

Octave band sensitivity *

LHM 0606/10 Dimensions in mm / inch

Circuit diagram

Frequency response

Octave SPL

1W/1m

Total octave SPL 1W/1m

Total octave SPL Pmax/1m

125 Hz 91.3 - -

250 Hz 85.3 - -

500 Hz 85.3 - -

1000 Hz 85.7 - -

2000 Hz 90.5

4000 Hz 98.2 - -

8000 Hz 91.1 - -

A-weighted - 90.4 97.1

Lin-weighted - 90.4 97.6

Octave band opening angles

Horizontal Vertical

125 Hz 180 180

250 Hz 180 180

500 Hz 180 180

1000 Hz 180 180

2000 Hz 122 122

4000 Hz 51 51

8000 Hz 42 42

Acoustical performance specified per octave * (all measurements are done with a pink noise signal;

the valuals are in dBSPL)

+ 2 hidden pages