Bosch LHM 0606/00 Quick Start Manual

Communications Systems | LHM 0606/xx Ceiling Loudspeaker
LHM 0606/xx Ceiling Loudspeaker
Suitable for speech and music reproduction
Flush-mounting in ceiling cavity
Easy to install
Simple power setting
Unobtrusive in virtually all interiors
Complies with international installation and safety
regulations
The LHM 0606/xx is a general purpose, 6 W, cost-effective ceiling loudspeaker. The /00 version is screw mounted and the /10 version is clamp mounted into the ceiling. An optional fire dome LBC 3080/01 is available.

Functions

An economic flushing-mounting ceiling loudspeaker is available for general purpose applications. This full range loudspeaker is suitable for both speech and music reproduction in shops, department stores, schools, offices, sports halls, hotels and restaurants.
The speaker assembly consists of a single-piece, 6W dual cone loudspeaker and frame, with a 100 V, matching transformer mounted on the back. A circular metal grille is an integrated part of the front. The appearance and neutral white color has been selected to be unobtrusive in virtually all interiors.

Certifications and Approvals

All Bosch loudspeakers are designed to withstand operating at their rated power for 100 hours in accordance with IEC 268-5 Power Handling Capacity (PHC) standards. Bosch has also developed the Simulated Acoustical Feedback Exposure (SAFE) test to demonstrate that they can withstand two times their rated power for short durations. This ensures extra reliability under extreme conditions, leading to higher customer satisfaction, longer operating life, and much less chance of failure or performance deterioration.
Region Certification
Europe CE
Safety acc. to EN 60065

Installation/Configuration Notes

Mounting
The assembly is simply and quickly installed into a hole in the ceiling cavity. The /00 version is secured with the three white screws (supplied). The /10 version is secured by two integral spring-loaded ceiling locking clamps. A circular template for marking a 165 mm diameter hole is included with the loudspeaker.
www.boschsecurity.com
2 | LHM 0606/xx Ceiling Loudspeaker
120
16
54.5
70.5
165
199
4.72
6.5
7.8
162
6.3
0.63
2.15
2.77
140
3x 4 , 120°
5.5
0.16
120
16
0.63
54.5
2.15
70.5
2.77
165
6.5 199
7.8
4.72
0
6W
3W
1.5W
4
SPL(dB)
31.5 63 125 250 500 1000 2k 4k 8k 16k 20k (Hz)
10dB
90dB
250 Hz 500 Hz
1000 Hz
2000 Hz 4000 Hz 8000 Hz
0
0
-10
-10
-20
-20
30˚ 30˚
60˚ 60˚
90˚ 90˚
120˚
120˚
180˚ 180˚
150˚ 150˚
Three wires on the matching transformer (primary) provide for selection of nominal full-power, half-power or quarter-power radiation.
Fire dome
During a fire, the ceiling cavity in which loudspeakers are installed can allow flames to spread throughout a building. To prevent fire entering the caving via the loudspeaker, the ceiling loudspeaker can be fitted with a protective steel fire dome (LBC 3080/01). This optional fire dome is mounted on the loudspeaker assembly using four self-tapping screws, supplied as standard. There are four knock-out holes; two (2) for rubber grommets (supplied) and two (2) for cable glands. (PG13).
Frequency response
LHM 0606/00 Dimensions in mm / inch
LHM 0606/10 Dimensions in mm / inch
Circuit diagram
Polar diagram (measured with pink noise)
Octave band sensitivity *
Octave SPL 1W/1m
Total octave SPL 1W/1m
Total octave SPL Pmax/1m
125 Hz 91.3 - -
250 Hz 85.3 - -
500 Hz 85.3 - -
1000 Hz 85.7 - -
2000 Hz 90.5
4000 Hz 98.2 - -
8000 Hz 91.1 - -
A-weighted - 90.4 97.1
Lin-weighted - 90.4 97.6
Octave band opening angles
Horizontal Vertical
125 Hz 180 180
250 Hz 180 180
500 Hz 180 180
Loading...
+ 2 hidden pages