Fire Alarm Systems | Bosch EVAX System - High-rise Applications
Bosch EVAX System - High-rise
Applications
www.boschsecurity.com
u Master panel with capability for multiple distributed
panels
The Bosch EVAX System for high-rise applications is a
networked emergency relocation and paging system
with integrated two‑way fireman’s telephone system. It
operates with the Fire Alarm Control Panel (FACP) in a
building to provide automatic response to life safety
emergencies. While providing all necessary features
for an effective voice evacuation system, it can easily
convey evacuation, stay-in-place, or other public
address announcements and automatic messages with
multiple channels of simultaneous audio.
Configure your system to include Fire Fighter Phones
or Warden Stations as required, for fire fighter
communications to supplement 2‑way radios and for
use in areas of refuge assistance so trapped
individuals can communicate with fire command.
Smoke control features include automatic or manual
positive or negative pressurization for compartments,
floors, or stairwells. The simple to use interfaces allow
fire department authorities to take over controls and
communicate effectively.
u Operates as stand‑alone or connected to an FACP
u Network transmission over fiber optic or copper pair
cable
u Digitized live voice and prerecorded messaging
u Zone paging control
System overview
The maximum system configuration contains up to 256
Distributed Panels providing up to 2028 monitor and
control points.
Page 2
2 | Bosch EVAX System - High-rise Applications
Distributed Panels
The Distributed Panels communicate with the Master
Panel through the NetCom Loop. They typically
provide:
• Voice Evacuation Speaker Loops – dedicated data
and audio loops using a minimum of 18 AWG wire
with end-of-line resistors (EOLR).
• Fire Phone Loops – dedicated audio loop using a
minimum of 20 AWG twisted pair wiring with an
EOLR.
• Fan and Damper Loops – data loop using a minimum
20 AWG twisted pair wiring on which up to 32
modules can be attached. Each module provides two
points (one control and one monitor) for a total of 64
points on the circuit.
• Additionally, local Audio Amplifiers can be connected
to the Distributed Panels.
The Bosch Distributed Panels additional provide
specific accessories to support specific functions. The
HMB‑DP provides four audio circuits, the HMB‑DP/P
provides four Fire Phone circuits, and the HMB‑DP‑42
provides 16 audio circuits.
Certifications and approvals
1Master Panel
2NetComm Loop
3Distributed Panels
4Voice Evacuation Speaker Circuits
5Fire Phone
6Fan and Damper Control and Monitor
7Local Audio Amplifiers (25 W, 50 W, 100 W or combinations
yielding 150 W or 200 W)
Functions
Master Panel
The Master Panel provides the high‑speed
communication loop (NetComm Loop), master
microphone control for live voice (PA) messages, dual
channel Digital Message Repeater (DMR) for up to
1000 prerecorded messages, and a 16‑switch control
module.
NetComm Loop
The NetComm Loop provides high‑speed RS‑485
communications over twisted pair, Category 5 UTP
cable. The network can be wired as Style 4 or Style 7
with a maximum of 4000 ft between panels and a total
loop length of 50,000 ft. The loop carries data and six
audio channels.
RegionCertification
USAULUOXX: Control Unit Accessories, System
CSFMsee our website
(ANSI/UL 864)
Installation/configuration notes
Compatible Products
Main Panel Accessories
DesignatorDescriptionPart Number
MB‑SLCSwitch/LED CardF.01U.201.669
MB‑SSCSwitch Scan CardF.01U.201.670
MB‑MFAMaster Fire Phone AssemblyF.01U.201.671
MB‑XIExtended Input InterfaceF.01U.201.672
MB‑OIOutput Interface CardF.01U.201.673
Distributed Panel Accessories
DesignatorDescriptionPart Number
EVX‑25EExpander Module 25 W4.998.143.753
EVX‑50EExpander Module 50 W4.998.143.785
EVX-100EExpander Module 100 W4.998.143.761
EVX‑T2885Power transformer for
EVX‑25E
EVX‑T17528Power transformer for
EVX‑50E/100E
MB‑MBKMother Board RelaysF.01U.201.677
MB‑AMIAudio Module InterfaceF.01U.201.678
4.998.143.738
4.998.143.739
Page 3
| Bosch EVAX System - High-rise Applications
3
MB‑FPIFire Phone InterfaceF.01U.201.679
MB‑FPO2Fire Phone Output AdapterF.01U.201.680
MB‑FOFiber Optic Interface CardF.01U.201.681
EVB‑BA100Backup Audio InterfaceF.01U.201.682
Phone Accessories
DesignatorDescriptionPart Number
MB‑FJTelephone JackF.01U.201.683
MB‑FHPortable HandsetF.01U.201.684
MB‑TCFire Phone CabinetF.01U.201.685
MB‑FSFire Phone StationF.01U.201.686
MB‑WSWarden StationF.01U.201.687
Replacement Parts
DesignatorDescriptionPart Number
MB‑DCCData Communication
F.01U.201.688
Controller
MB‑ASCAudio System ControlF.01U.201.689
MB‑MMCMaster Microphone ControlF.01U.201.690
MB‑MBRMother Board RemoteF.01U.201.691
MB‑PWRMaster Panel Power SupplyF.01U.201.692
Parts included
Quant.Component
1Master or Distributed Panel
1Literature – Installation Instructions
Technical specifications
Communications Bus
Communication Type:RS‑485 standard
Data Rate:1 MB
Frequency:1.024 MHz
Wire Type:Twisted pair, Category 5 UTC
Current:50 mA maximum
Impedance:120 Ω maximum between panels
Voltage (peak to peak):5 V maximum
Electrical (Master Panel)
Current Draw
• ASC:Alarm: 30 mA, Standby: 30 mA
• SLC:Alarm: 6 mA, Standby: 6 mA
• SSC:Alarm: 25 mA, Standby: 25 mA
1
Batteries
• Type:Two 12 VDC Gel Cell in series
• Current (battery
800 mA
charging):
• Current (input):Typical Load: 0.28 A
Maximum Load: 0.4 A
Two 7 Ah batteries is the maximum size that will fit in
the Master Panel Enclosure which has a battery
mounting area (HxWxD) of 4 in. x 14.25 in. x 2.5 in.
(101 mm x 362 mm x 64 mm). Larger batteries must
be installed in a UL Listed battery enclosure.
Electrical (Distributed Panel)
Current Draw
• AMI:Alarm: 10 mA, Standby: 10 mA
• DCC:Alarm: 55 mA, Standby: 55 mA
• MBR:Alarm: 55 mA, Standby: 10 mA
• Batteries
2
• Type:Two 12 VDC Gel Cell in series
• Current (battery
charging):
Depends on amplifier;
EVX‑25E/50E: 800 mA maximum
EVX‑100E: 1 A maximum
• Capacity:Depends on amplifier;
EVX‑25E/50E: 24 VDC, 18 Ah maximum
EVX‑100E: 24 VDC, 24 Ah maximum
• Power
• Input (primary):120 VAC
• Input current:Depends on panel configuration.
• Input (circuits):all circuits at 24 VDC
2
Two 12 Ah batteries is the maximum size that will fit
in the Distributed Panel Enclosure which has a battery
mounting area (HxWxD) of 5 in. x 14.25 in. x 4 in.
(127 mm x 362 mm x 101 mm). Larger batteries must
be installed in a UL Listed battery enclosure.
• DCC:Alarm: 80 mA, Standby: 80 mA
• IOI:Alarm: 20 mA, Standby: 20 mA
• MMC:Alarm: 45 mA, Standby: 45 mA
Page 4
4 | Bosch EVAX System - High-rise Applications
Mechanical
Enclosure
Color:Charcoal grey
Dimensions (h x w x d):27 in x 14.5 in x 4 in
(685.8 mm x 368.3 mm x 101.6 mm)
Ordering information
HMB-MP16 Master Panel
16 Switch/Input, includes DCC, ASC, SSC, PWR-2A,
MMC, 1‑SLC, 1‑IOI, Swing Door and Cabinet
Order number HMB-MP16
HMB-DP Distributed Panel, 4 Audio Circuits
Includes DCC, MBR, AMI, 1‑MBK IN Standard Cabinet,
no amplifiers in basic assembly
Order number HMB-DP
HMB-DP/P Distributed Panel, 4 Fire Phone Circuits
Includes DCC, MBR, 1‑FPI, PWR‑2A used for phone
only systems
Order number HMB-DP/P
HMB-DP-42 Distributed Panel, 16 Audio Circuits
Includes DCC, AMI, 2‑MBR, 4‑MBK, 2‑MBI in CAB‑42
Cabinet
Order number HMB-DP-42
Accessories
EVX-25E Expander Module 25 Watt
Complete module with built-in tone generator capable
of operating as a stand-alone Voice Evacuation System
with only tone and microphone amplification; power
transformer or cabinet not included
Order number EVX-25E
EVX-50E Expander Module 50 Watt
Complete module with built-in tone generator capable
of operating as a stand-alone Voice Evacuation System
with only tone and microphone amplification; power
transformer or cabinet not included
Order number EVX-50E
EVX-100E Expander Module 100 Watt
Complete module with built-in tone generator capable
of operating as a stand-alone Voice Evacuation System
with only tone and microphone amplification; power
transformer or cabinet not included
Order number EVX-100E
EVB-BA100 Backup Audio Interface
Provides a means to switch in a backup amplifier in
the event of a primary amp failure
Order number EVB-BA100
EVX-T2885 Power Transformer for EVX‑25E
Open frame, 28 VAC @ 100 VA
Order number EVX-T2885
EVX-T17528 Power Transformer for EVX‑50E/100E
Open frame, 28 VAC @ 180 VA
Order number EVX-T17528
MB-AMI Audio Module Interface
Controls 2 EVX-25E/50E/100E Expander Modules in
Distributed Panels
Order number MB-AMI
MB-ASC Audio System Control
Order number MB-ASC
MB-DCC Data Communications Controller
Order number MB-DCC
MB-FH Portable Handset
Color red, 6 mount in MB‑TC cabinet
Order number MB-FH
MB-FJ Telephone Jack
Brushed stainless steel single gang plate
Order number MB-FJ
MB-FO Fiber Optic Interface Card
Provides termination for Fiber Optic communications
between the Master Panel and the Distributed Panels
Order number MB-FO
MB-FPI Fire Phone Interface
Provides 4 supervised Class B Fire Phone circuits in
distributed panel (4 max 16 circuits). When more than
one is used in a HMB‑DP Master Panel a MB‑FPO2 Fire
Phone Output Adapter is required for each.
Order number MB-FPI
MB-FPO2 Fire Phone Output Adapter
Extra terminal card that must be used with the 2nd,
3rd and 4th MB‑FPI cards in a Distributed Panel
Order number MB-FPO2
MB-FS Fire Phone Station
Coil cord, thumb turn latch, cabinet: red, surface/semiflush mount
H x W x D: 12-3/4 x 7 1/4 x 3 3/4 in.
Order number MB-FS
MB-MBK Mother Board Relays
Provides 4 Class B speaker loop outputs, a maximum
of 2 MB‑MBK cards provide 8 Class B or 4 Class A
speaker circuits per Distributed Panel
Order number MB-MBK
MB-MFA Master Fire Phone Assembly
Master Panel's Fire Phone handset, plate and interface
PC board
Order number MB-MFA
MB-MMC Master Microphone Control
Order number MB-MMC
Page 5
5 | Bosch EVAX System - High-rise Applications
MB-MBR Mother Board Remote
Provides the 4 card slots (can be extended to max 7)
for MB‑AMI and MB‑FPI and 2 MB‑MBK
Order number MB-MBR
MB-OI Output Interface Card
Adds 16 outputs to Master Panel
Order number MB-OI
MB-PWR Master Panel Power Supply
Order number MB-PWR
MB-SLC Switch/LED Card
16 switches and LEDs for manual control at Master
Panel
Order number MB-SLC
MB-SSC Switch Scan Card
Controls up to 8 Switch/LED Cards (128 Switches).
Multiple (16) MB‑SSC cards can be used for a system
capacity of 2048 switches. Field additions or
replacement only.
Order number MB-SSC
MB-TC Fire Phone Cabinet
Cabinet: charcoal gray, surface/semi-flush mount, key
lock
H x W x D: 27 x 14-1/2 x 4 in.
Order number MB-TC
MB-WS Warden Station
Cabinet: red, surface/semi-flush mount
H x W x D: 12‑3/4 x 7‑1/4 x 3‑3/4 in.
Order number MB-WS
MB-XI Extended Input Interface
Adds 16 inputs to Master Panel
Order number MB-XI
BATB-40 Battery Box\Enclosure
The BATB-40 Battery Box holds two dry or wet cell
batteries. The box can be used with fire alarm systems
or intrusion systems.
Order number BATB-40
BATB-SHELF Optional Battery Shelf
An optional battery shelf for the BATB-40. It allows two
additional batteries to be placed in the battery box.
Order number BATB-SHELF
BATB-80 Battery Box\Enclosure with Shelf
The BATB-80 Battery Box holds up to four dry or wet
cell batteries. The box can be used with fire alarm
systems or with intrusion systems.
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone +86 21 22181111
Fax: +86 21 22182398
www.boschsecurity.com.cn
Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: +55 19 2103 2860
Fax: +55 19 2103 2862
latam.boschsecurity@bosch.com
www.boschsecurity.com