1 AutoDome 3 W–Wall
1
P–Pipe
1
2 PW–Pendant White
S–Suspended Ceiling
4 60–24 VAC, 60 Hz NTSC
50–24 VAC, 50 Hz PAL
1. Wall and pipe mount kits apply only to pendant models.
Technical specifications
Electrical
Color Camera
Imager Interline transfer CCD
1/4 in. image format
Active Pixels
PAL Model (H x V) 752 x 582
NTSC Model (H x V) 768 x 494
Lens 16x zoom (4.1–65.6 mm)
F1:1.4 to F1:3.0
Focus Automatic with manual override
Iris Automatic with manual override
Field of View 2.7° to 48°
Video Output 1.0 Vp-p, 75 Ohm
Gain Off / auto
Synchronization Line-Lock (–120° to 120° vertical phase
adjust) or internal crystal
Aperture Correction Horizontal and vertical
Digital Zoom Not applicable
Horizontal Resolution
NTSC Model 470 TVL
PAL Model 460 TVL
Sensitivity
Sensitivity (Minimum
Usable Video: 20 IRE)
0.5 lux (0.05 fc)
Sensitivity
(Usable Video: 50 IRE)
0.8 lux (0.08 fc)
Signal-To-Noise Ratio >50 dB
White Balance 2000 K to 10,000 K
Environmental
Design Rating IP 31 (NEMA 2)
Operating Humidity 0%–90% non-condensing
Operating Temperature –10°C to 50°C (14°F to 122°F)
Storage Temperature –40°C to 60°C (–40°F to 140°F)
Incompatibility Statement
Bosch BasicDomes use the remote addressing feature, FastAddress,
exclusively. There is no manual way to set the address using switches.
Because of this, these domes are not compatible with Bosch systems
that meet the following criteria:
Fixed Speed Keyboards
• LTC 8500/LTC 8600/LTC 8800 CPUs version 5.2 or
older.
• Any LTC 8500/LTC 8600/LTC 8800 CPUs without
two (2) 8-position dip switches.
• Any LTC 8600/LTC 8800 sold before 6/94 and
LTC 8500 sold before 5/95.
Older LTC 8500/LTC 8600/LTC 8800 systems can be upgraded by
replacement of CPU with current version. Changes to other system
accessories may also be necessary when upgrading to variable speed
(for example, keyboards, receiver/drivers, port expanders, etc.).
Mechanical
Weight 1.7 kg (3.7 lb)
Pan/Tilt 360° continuous, 0°to 90° tilt
Pre-position Speed 360°/sec., ±0.5° accuracy
Variable Speed 120°/sec.
Power Consumption 15 W
Miscellaneous
Camera Setup Control Bi-phase or RS-232
Pre-Positions 99, each with 16-character titles
Guard Tour • Recorded tours - two (2), with a
total duration of 15 minutes.
• All camera functions stored in
memory.
Addressing FastAddress remote addressing
Sectors/Titling 16 independent sectors with 16-
character titles/sector.
2 | G3B Series BasicDome Economical Systems