Communications Systems | PLE 1MExx0 xx Plena Mixer Amplifier
PLE 1MExx0 xx Plena Mixer Amplifier
4 microphone / line inputs, plus music source inputAnnouncement only output, 3 wire volume overrideWide range of output power (60, 120 and 240 Watts)2 tone chime
These Plena Economy mixer amplifiers are professional public address units with modern state of the art features. They are easy to use, taking the complexity away from the user and putting it where it belongs, inside the equipment. Providing a crisp call or clear music is as easy as turning on the radio. Offering the essentials of public address in an affordable package.
Microphone and line inputs
All Mic/line inputs can be switched between microphone level and line level sensitivity. The inputs are balanced but can be used unbalanced. Phantom power can be switched on to provide power to condenser microphones.
Input channel 1 can take priority over all other microphone and music inputs:
•Input 1 can be activated by contact closure on the PTT (push to talk). A 2-tone chime can be configured to precede an announcement.
Music input
A separate music input is available with its volume control.
Personalized settings
More unique features are available such as a detachable label where the user can write the names for inputs. This label can then be mounted on the front, protected by the clear window.
Another useful feature is to indicate preferred settings on the front panel by inserting colored pins at the preset levels of all knobs. You can then instruct a user to set all the controls to the silver pins to configure the system for their particular use. A second user can set all controls to the red pins for their configuration.
Power
The mixer amplifiers come in 60, 120 and 240 Watt output power. This power is directly available on 100 V (70 V for US versions) constant voltage connections and on a low impedance connection for a 4 ohm load. Moreover, the amplifiers have a separate 100 V (70 V for US versions) call-only output channel for addressing areas where only priority announcements are required. The call-only output can also be used for 3-wire remote, volume control override.
www.boschsecurity.com
2 | PLE 1MExx0 xx Plena Mixer Amplifier
Output status
An LED VU meter monitors the master output. A headphone socket, below the VU meter, provides the mixer output. For total reliability and ease of use, a limiter is integrated into the output stage to restrict output if the user applies too much signal.
Controls and indicators Front
•On/off switch
•Power on LED
•LED VU meter for master output (LEDs for -18, -12 -6, -3, 0 dB)
•Master volume knob
•Four volume knobs for microphone inputs
•Volume knob for background music
•Knob for treble level
•Knob for bass level
•Headphone socket
Back
•Dip switches
Safety |
acc. to EN 60065 |
EMC emission |
acc. to EN 55103 1 |
EMC immunity |
acc. to EN 55103 2 |
Quantity Components
1PLE-1MExx0 xx Plena Mixer Amplifier
1Power cord
1Manual
1Plena Easy Line CD
Electrical
Mains power supply
Voltage -EU versions |
230 VAC ±10%, 50/60 Hz (reduced |
|
power at lower mains voltage) |
Voltage -CN versions |
220 VAC ±10%, 50/60 Hz (reduced |
|
power at lower mains voltage) |
Voltage -US versions |
120 VAC ±10%, 50/60 Hz (reduced |
|
power at lower mains voltage) |
Inrush current |
5 A |
PLE 1ME060 EU or -CN |
|
Inrush current |
10 A |
PLE 1ME120 EU or -CN |
|
Mains power supply
Inrush current |
12 A |
PLE 1ME240 EU or -CN |
|
Inrush current PLE 1ME060 US |
10 A |
Inrush current PLE 1ME120 US |
20 A |
Inrush current PLE 1ME240 US |
24 A |
Power consumption |
|
PLE 1ME060 xx |
200 VA |
PLE 1ME120 xx |
400 VA |
PLE 1ME240 xx |
800 VA |
Performance |
|
Frequency response (Line) |
60 Hz to 20 kHz (+1/ 3 dB @ 10 dB |
|
ref. rated output) |
Frequency response (Mic.) |
70 Hz to 20 kHz (+1/ 3 dB @ 10 dB |
|
ref. rated output) |
Distortion |
<1% @ rated output power, 1 kHz |
Bass Control |
Max. ± 8 dB |
Treble Control |
Max. ± 8 dB |
Mic./Line input |
4 x |
Input 1 (push-to-talk contact with |
5 pin Euro style, balanced, phantom |
priority) |
|
Input 2 |
3 pin Euro style, balanced, phantom |
Input 3 and 4 |
TRS Jack (1/4, 6.3mm) balanced |
Sensitivity |
1 mV (mic.); 300 mV (line) |
Impedance |
>1 kohm (mic.); >5 kohm (line) |
Dynamic range |
93 dB |
S/N (flat at max volume) |
>63 dB (mic.); >70 dB (line) |
S/N (flat at min volume/muted) |
>75 dB |
CMRR (mic.) |
>40 dB (50 Hz to 20 kHz) |
Headroom |
>25 dB |
Speech filter |
-3 dB @ 315 Hz, high-pass, 6 dB/oct |
Phantom power supply |
16 V via 1.2 kohm (mic.) |
Music input |
|
Connector |
Cinch, stereo converted to mono |
Sensitivity |
200 mV |
Impedance |
22 kohm |
S/N (flat at max volume) |
>75 dB |
S/N (flat at min volume/muted) |
>80 dB |
Headroom |
>25 dB |
Loudspeaker output |
|
Connector |
Screw terminal, floating |
Max / rated PLE-1ME060 xx |
90 W / 60 W |
Max / rated PLE-1ME120 xx |
180 W / 120 W |
Max / rated PLE-1ME240 xx |
360 W / 240 W |