Bosch DS150I, DS151I Specsheet
Intrusion Alarm Systems | DS150i Series Request-to-exit Detectors
DS150i Series Request-to-exit Detectors
www.boschsecurity.com
u Single or double door use
u Wall or ceiling mountable
u Internal vertical pointability
The DS150i Series consists of the DS150i Detector
(light gray) and the DS151i Detector (black). They are
specifically designed for Request-to-exit (REX)
applications. The DS150i and DS151i detect motion in
their coverage area and signal an access control
system or door control device.
Functions
Test Features
Externally visible activation LED.
Certifications and approvals
Region Certification
Australia RCM [DS150i]
Europe CE 2004/108/EC EMC Directive;
2006/95/EC Low-Voltage Directive;
2011/65/EU Restriction of the use of
certain hazardous substances in electrical and electronic equipment
USA UL ALVY: Access Control Systems Units
(UL294)
u Wrap-around coverage pattern
u Selectable relay trigger mode
Installation/configuration notes
4.5 m
0 m
4.5 m
0 ft
15 ft
15 ft
0 ft
15 ft
0 m
4.5 m
4.5 m 0 m 4.5 m
0 ft
15 ft
15 ft
0 ft
15 ft
0 m
4.5 m
+14°
3 m 0 m 3 m
0 ft
5 ft
10 ft
0 ft
10 ft
0 m
1.5 m
-14°
0 m 1.5 m
5 ft
0 m
4.5 m
0 m
4.5 m
15 ft
15 ft
-14°
+14°
0 ft
0 ft
0 ft
2 | DS150i Series Request-to-exit Detectors
Mechanical
Alarm Output: Two Form C relay contacts
Indicators: One activation LED
Relay Latch Time: Adjustable to 60 sec
Front View and Top Views
A front view of the DS150i and DS151i coverage, as
well as top views of the coverage pattern on the floor.
The typical coverage measurements are 2.4 m x 3 m
(8 ft x 10 ft).
Side View
A side view of the DS150i and DS151i coverage pattern.
Enclosure
Dimensions:
Enclosure
Material:
Power Loss
Default Mode:
Timer Mode: Programmable reset (accumulative) or non-reset
Mounting
Location:
3.8 cm x 15.9 cm x 3.8 cm
(1.5 in. x 6.25 in. x 1.5 in.)
High impact ABS plastic enclosure
Programmable fail-safe or fail-secure modes.
(counting) mode.
Surface mount on wall or ceiling
Environmental
Operating
Temperature:
Radio Frequency
Interference (RFI)
Immunity:
-29°C to +49°C (-20°F to +120°F)
No alarm or setup on critical frequencies in the
range from 26 MHz to 1000 MHz at 50 V/m.
Ordering information
DS150i Request‑to‑exit PIR Detector
For use in Request-to-EXit (REX) applications. Provides
PIR, 2.4 m x 3 m (8 ft x 10 ft) coverage.
Order number DS150i
DS151i Request‑to‑exit PIR Detector
Black enclosure. For use in Request-to-EXit (REX)
applications. Provides PIR, 2.4 m x 3 m (8 ft x 10 ft)
coverage.
Order number DS151i
Accessories
TP160 Trim Plate
A light gray trim plate used when mounting the
detector over a standard single-gang box.
Order number TP160
TP161 Trim Plate
A black trim plate used when mounting the sensor
over a standard single-gang box.
Order number TP161
Technical specifications
Electrical
Current Draw: 26 mA at 12 VDC
Voltage: 12 VAC or VDC; 24 VAC or VDC
Loading...