Bosch DKE9465EUC, DKE9465MUC, DKE9405EUC, DKE9405MUC User Manual
Bosch ventilation
DKE94
use and care manual
Table of Contents
About This Manual .................................................................................................. 1
How This Manual Is Organized ............................................................................................... 1
Safety ...................................................................................................................... 1
Getting Started ........................................................................................................ 3
Operation ................................................................................................................ 3
About the Appliance ................................................................................................................ 3
Cleaning and Maintenance ..................................................................................... 4
Care and Cleaning .................................................................................................................. 4
Maintenance............................................................................................................................ 6
Service .................................................................................................................... 7
Self Help.................................................................................................................................. 7
Warranty.................................................................................................................................. 8
Questions?
1-800-944-2904
www.boschappliances.com
5551 McFadden Ave.
Huntington Beach, CA 92649
We look forward to hearing from you!
About This Manual
How This Manual Is Organized
This manual contains several sections:
•The Safety section describes important procedures that can ensure your
safety while using the appliance.
•The Getting Started section describes the features and functionality of the
appliance, including a description of how to set it up and operate it.
•The Operation section describes how to operate and get the best perfor-
mance out of each component.
•The Cleaning and Maintenance section describes how to clean and maintain
the appliance.
•The Service section includes troubleshooting tips and your warranty.
Before using your appliance, be sure to read this manual. Pay special attention to
the Important Safety Instructions located at the beginning of the manual.
Safety
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS
Important Safety
Instructions
Installation • Have the installer show you the location of the circuit breaker or fuse. Mark it
• This appliance must be properly installed and grounded by a qualified techni-
Intended Use WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY
TO PERSONS, OBSERVE THE FOLLOWING:
WARNING
Read all instructions before using this appliance. If the information in
this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. To reduce the risk of
fire, electric shock, or injury to persons, take these precautions:
for easy reference.
cian. Connect only to properly grounded outlet. Refer to Installation Instructions for details.
1) Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer (800-944-2904).
English 1
2) Before servicing or cleaning the unit, switch power off at service panel
and lock service panel. This will prevent power from being switched on
accidentally. When the service panel cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
FOR GENERAL RESIDENTIAL KITCHEN VENTILATING USE ONLY. TO AVOID
A FIRE OR EXPLOSION HAZARD DO NOT USE TO EXHAUST HAZARDOUS
OR EXPLOSIVE MATERIALS OR VAPOR.
For indoor use only.
To reduce the risk of fire or electric shock, do not use the fan with any solid-state
speed control device.
Cooking Safety • When children become old enough to use the appliance, it is the legal
responsibility of the parents or legal guardians to ensure that they are
instructed in safe practices by qualified persons.
Cleaning Safety • CAUTION - Grease left on filters can remelt and move into the vent.
Work Space / Environment WARNING - TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
a) Never leave surface units unattended at high settings. Boilovers cause
smoking and greasy spillovers that may ignite. Heat oils slowly on low or
medium settings.
b) Always turn hood ON when cooking at high heat or when flambéing food
(i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).
c) Clean ventilating fans frequently. Grease should not be allowed to accu-
mulate on blower or filter.
d) Use proper pan size. Always use cookware appropriate for the size of the
surface element.
In Case of Fire WARNING - TO REDUCE THE RISK OF INJURY TO PERSONS, IN THE EVENT
OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:
a) SMOTHER FLAMES with a close-fitting lid, cookie sheet, or other metal
tray, then turn off the gas burner or the electric element. BE CAREFUL
TO PREVENT BURNS. If the flames do not go out immediately, EVACU-
ATE AND CALL THE FIRE DEPARTMENT.
b) NEVER PICK UP A FLAMING PAN, you may be burned.
c) DO NOT USE WATER, including wet dishcloths or towels - a violent
steam explosion may result.
d) Use an extinguisher ONLY if:
1) You know you have a class ABC extinguisher, and you already know
how to operate it.
2) The fire is small and contained in the area where it started.
3) The fire department is being called.
4) You can fight the fire with your back to an exit.
Smother grease fire with pan lid or baking soda.
WARNING - In case of cooktop fire, do not operate blower.
English 2
Getting Started
Fan OFF
Light
ON / OFF
Reduce fa
n
speed
Fan ON and
increase speed
Display for fan setting
Before You Begin The blower should be turned on for about five minutes before cooking in order to
establish air currents upward through the hood. Thus when heat, smoke, moisture, grease and cooking odors are produced, they will be carried outside instead
of drifting into other rooms. Use the low speeds for normal use and the higher
speeds for strong odors or fumes.
A Note about Drafts: Drafts across the range or cooktop will reduce the effectiveness of the hood. Such drafts should be prevented when possible. The best job of
ventilation in the kitchen is done when the only air currents are those created by
the blower itself.
Operation
About the Appliance
Features The hood uses push buttons to activate the controls.
Operation
Light Press to turn lights on or off.
Fan Press the button to turn the fan on or to increase the fan speed. Press the
button to decrease the fan spread. Press the button to turn the fan
off.
0
0
Figure 1: Controls
English 3
Cleaning and Maintenance
Care and Cleaning
Cleaning WARNING: Be sure the entire hood (including the filters and light
bulbs) has cooled and grease has solidified before attempting to
clean any part of the appliance.
DO NOT use the following!
• Abrasive Pads such as those made from steel wool SOS
mesh.
• Abrasive cleaners such as Comet
• Flammable products such as gasoline or kerosene.
Hood Surface Stainless Steel Surfaces: Wipe and dry stainless steel in the same direction as
the grain. Avoid using too much pressure, which may mar the surface. To remove
fingerprints and give added shine, use cleaners such as Stainless Steel Magic
Do not allow any cleaning compounds to remain in contact with stainless steel for
extended periods.
Filters CAUTION: To avoid fire hazard, keep filters clean. Grease left on fil-
ters can remelt and migrate along the vent path.
Aluminum Filter
The hood has a removable aluminum filter that must be cleaned when it collects
grease. Filters can be cleaned with soap and water or in the dishwasher. When
used over a wok or other high grease application, more frequent cleaning may be
required.
, Ajax and Zud.
, Brillo or plastic
.
English 4
Remove the filter for cleaning: push the handle in and pull down. The front will
come out first. Then pull the back down and out.
Figure 2: Filter
To replace the filters: insert the back ends first, then while holding the handles,
push in and up until the filters are secured in place.
Carbon Filter
A carbon filter is used only with a recirculation unit. It is in addition to the aluminum filter explained previously. Carbon filters are disposable; They cannot be
cleaned or reused. With normal use (1 to 2 hours per day), the carbon filter should
be replaced once per year. Contact your dealer to order replacement carbon filters.
Do not use cooktop while hood is disassembled, to ensure adequate ventilation.
English 5
Remove the filter for replacement: Remove the aluminum filter and set aside.
Then remove the carbon filter. Push in on the latch in the front of the carbon filter.
Pull down and out. Dispose of filter.
Remove Carbon Filter
Install the replacement filter: Insert notches in holes on back wall of hood. Holding
the latch in, push front up into place. Release latch.
Buttons Wipe with sudsy water or household cleaners such as Fantastic
409
, rinse well and dry with a clean soft cloth to avoid water marks.
Install Carbon Filter
Figure 3: Carbon Filter
or Formula
Maintenance
Maintenance The following maintenance procedures can be performed without the aid of a ser-
vicer. Always contact a servicer for other repairs.
Lights
Use a 12V halogen bulb (max. 20Watt) with a two pin, G4 base.
NOTE: Turn off the lights and fan and allow lights to cool before handling. If lights do
not operate upon installation, check for proper insertion.
CAUTION: TURN POWER OFF AT BREAKER BEFORE REMOVING A DAMAGED BULB. DO NOT TOUCH THE BULBS IMMEDIATELY AFTER USE. THE BULBS WILL REMAIN HOT FOR
SEVERAL MINUTES.
Light Bulb Replacement Note: DO NOT touch a new halogen bulb with your fingertips. Grasp the bulb
through a clean paper towel or facial tissue. The oils from your skin can reduce
the longevity of the bulb.
Use a small flathead screwdriver (or your fingernail) to remove the lens.
Figure 4: Light Bulb Replacement
Pull damaged bulb straight out from the socket to remove. Press pins in bulb base
straight into socket until fully seated. Snap lens back into place.
English 6
Service
Self Help
Troubleshooting Use these suggestions before calling for service to avoid service charges. When
calling service, please have your serial number and model number ready
Table 1: Troubleshooting
Problem Possible Explanations
Noise During Operation Some noise is normal due to vibration and air
movement. Excessive noise indicates one of
the following:
• Ductwork is too small/undersized.
• Ductwork is too large/oversized.
• Ductwork is loose.
• Transition is too small or too loose.
• Screws in trim parts, etc. are loose.
Fan Motor Does Not Work • Power supply to hood is not sufficient.
• Wires are not completely connected.
.
Lights Under Hood Hum A slight hum is normal.
Operation of Hood Trips
Breaker
• Wiring is not correct.
• Circuit is not correct.
Product Data Plate The data plate shows the model and serial number. It is located behind the filter.
Keep your invoice or escrow papers for warranty validation if service is needed.
Data Plate Behind Filter
Figure 5: Data Plate Location
English 7
Warranty
General Information The warranties provided by BSH Home Appliances Corp. in this Statement of Limited
Warranty apply only to the BSH Ventilation Hood (“hood”) and Internal Blower sold to
you, the first using purchaser, provided that the hood and blower were purchased (1)
for your use and not for resale and (2) in the United States or Canada and is located in
the country of purchase. As used in this Statement of Limited Warranty, the term “Date
of Installation” shall refer to the earlier of the date the hood and internal blower are
installed or ten (10) business days after the date the hood and internal blower are sold
to the first using purchaser, the warranties stated herein apply only to the first using
purchaser and are not transferable.
Standard Limited Warranty
Other Conditions of the Limited Warranties
Standard Limited Warranty BSH warrants that its hood and internal blower are free
from defects in materials and workmanship for a period of twelve (12) months from the
Date of Installation. During the warranty period, BSH or its authorized service center
will repair or replace, at its sole option, any hood or internal blower that proves to have
been defective under conditions of normal use without charge. All removed parts and
components shall become the property of BSH, at BSH’s option. All replaced and/or
repaired parts shall assume the identity of the original part for purposes of this warranty and this warranty shall not be extended with respect to such parts.
Other Conditions of the Limited Warranties The warranties provided in this Statement
of Limited Warranty exclude defects or damage resulting from (1) use of the hood or
internal blower in other than its normal and customary manner (commercial use of the
hood or internal blower shall not be deemed normal or customary), (2) misuse, abuse,
accidents or neglect, (3) improper operation, maintenance, installation or unauthorized
service, (4) adjustment or alteration or modification of any kind, (5) a failure to comply
with applicable state, local, city, and county electrical and/or building codes and (6)
external forces such as floods, fires, acts of God or other circumstances beyond
BSH’s control. Also excluded from this warranty are scratches and damages on external surfaces and exposed parts of the hood and internal blower on which the serial
numbers have been altered, defaced of removed. To the extent allowed by law, this
warranty sets out your exclusive remedies with respect to products covered by it,
whether the claim arises in contract or tort (including strict liability and negligence) or
otherwise. BSH will not be liable for consequential or incidental damages, losses, or
expenses. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES.
ANY WARRANTY IMPLIED BY LAW, WHETHER FOR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, SHALL BE EFFECTIVE
ONLY FOR THE PERIOD THAT THIS EXPRESS WARRANTY IS EFFECTIVE. No
attempt to alter, modify, or amend this warranty shall be effective unless authorized in
writing by an officer of BSH.
How to Obtain Warranty Service
Notice To California Owners
English 8
How to Obtain Warranty Service To obtain warranty service for the hood or internal
blower, you should contact the nearest BSH authorized service center or the BSH
Customer Support Call Center, 5551 McFadden Avenue, Huntington Beach, CA
92649, 800/944-2904. Please have your model number and serial number when you
call. They are printed on the inside left panel of the hood and the bottom of the internal
blower.
NOTICE TO CALIFORNIA OWNERS If your hood or internal blower needs warranty
service and there is no authorized BSH service center reasonably close to you, you
may notify the BSH reseller from whom you purchased the hood or internal blower. If
the BSH reseller fails to repair or replace the defective parts, or partially refund your
purchase price (where applicable), you may have the hood or internal blower repaired
at any large appliance repair shop or center and you will be reimbursed for all reasonable expenses provided the costs are substantiated in writing and the work performed
is covered by this warranty. BSH shall not reimburse any repair costs hereunder which
exceed the depreciated value of the hood or internal blower.
Loading...