Bosch DCN-DISS-D, DCN-DISS-L Specsheet
Communications Systems | DCN‑DISS / DCN‑DISL Discussion Unit with fixed Microphone
DCN‑DISS / DCN‑DISL Discussion Unit with
fixed Microphone
www.boschsecurity.com
u Low susceptibility to mobile phone interference
u Compact, attractive and ergonomic design
u Fixed microphone
u Built-in loudspeaker
u Usable as delegate unit or chairman unit
The Discussion Unit with fixed Microphone enables
participants to speak, register a request-to-speak and
listen to the speaker. The microphone stem is flexible.
The unit also accommodates two headphone
connections, so the speaker can be heard clearly even
in situations with excessive background noise. The
built-in loudspeaker is muted when the microphone is
on to prevent acoustic feedback. Rims are available in
a range of colors to match the interior (DCN-DISR, to
be ordered separately).
Functions
• Headphone output level reduction to prevent acoustic
feedback (active when listening to the floor and when
the microphone is on)
• The unit can be used a delegate unit or as a chairman
unit (DCN-DISBCM chairman buttons to be ordered
separately).
• To lock the loop-through cable, a cable clamp is
available (DCN-DISCLM, to be ordered separately).
• The unit is available with two different microphone
lengths and in light and dark colored bases.
Controls and Indicators
• Microphone with red or green indicator
• Microphone button with a red, green or yellow
illuminated ring. Red indicates microphone is active,
green indicates request-to-speak accepted, and
yellow indicates ‘VIP’
• VIP indicator is lit when the delegate is part of the
notebook (only available if PC Software is used)
• Headphone volume control buttons
• Recessed ‘De-init’ switch
Interconnections
• Two 3.5 mm (0.14 in) stereo jack type headphone
sockets
• 2 m (78.7 in) cable terminated within a molded sixpole circular connector.
• Six-pole circular connector for loop-through
connections
Certifications and approvals
Region Certification
Europe CE
2 | DCN‑DISS / DCN‑DISL Discussion Unit with fixed Microphone
Technical specifications
Electrical
Frequency response 30 Hz to 20 kHz
Headphone load impedance > 32 ohm < 1kohm
Output power 2 x 15 mW/32 ohm
Mechanical
Mounting Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D) (without microphone)
Tabletop 61 x 190 x 116 mm
(2.4 x 7.5 x 4.6 in)
Flush mounted 6 x 190 x 120 mm (0.2 x 7.5 x 4.7 in)
Microphone lengths
DCN-DISS 300 mm (11.8 in)
DCN-DISL 470 mm (18.5 in)
Weight
DCN-DISS 880 g (1.94 lb)
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
Order number DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
Order number DCN-DISR-D
DCN‑DISRMH Rim Metal High Gloss (10 pcs)
metal, high gloss, 10 pieces
Order number DCN-DISRMH
DCN‑DISRMS Rim Metal Semi Gloss (10 pcs)
metal, semi gloss, 10 pieces
Order number DCN-DISRMS
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
Order number DCN-DISBCM
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
Order number DCN-DISBDD
DCN‑DISCLM Cable Clamp (25 pcs)
25 pieces
Order number DCN-DISCLM
DCN-DISL 895 g (1.97 lb)
Color top Silver (RAL 9022)
Color base
DCN-DISS-L Light Grey (RAL 000 7500)
DCN-DISS-D Charcoal (PH 10736)
DCN-DISL-D Charcoal (PH 10736)
Ordering information
DCN‑DISS‑L Discussion Short Microphone Light
short microphone, light base
Order number DCN-DISS-L
DCN‑DISS‑D Discussion Short Microphone Dark
short microphone, dark base
Order number DCN-DISS-D
DCN‑DISL‑L Discussion Long Microphone Light
long microphone, light base
Order number DCN-DISL-L
DCN‑DISL‑D Discussion Long Microphone Dark
long microphone, dark base
Order number DCN-DISL-D
DCN‑DISRH‑SR Rim High Gloss Silver (10 pcs)
silver, high gloss, 10 pieces
Order number DCN-DISRH-SR
Loading...