Bosch 15RTA, UML-150-90, 17RTV, 17RTA, 15RTC Installation Manual

Rack Mount Bracket

LCD DISPLAY MOUNT MODEL

INSTALLATION MANUAL

Step1

(8)M4*8 phillips screw

Secure your flat panel to Rack Mount Bracket from the back side using The VESA 75mm or
100mm mounting points and (4),(8) M4*8 phillips screw.

(figure 1,2,3)

<Dual>

<Single>

(4)M4*8 phillips screw

<Non Flat>

(2)mount guide bracket (4)4*8 phillips screw

(4)M4*8 phillips screw

Figure 1

Figure 2

Figure 3

RACK MOUNT BRACKET ASSEMBLY

Step2

Min:15

Max:152

55~75

55~75

75~100

141~161

271~291

Units: mm

<Mount Spec>

Take the two(2) side brackets and adjust the location of side bracket before secure

them to the Rack Mount Bracket mount using the (4) M4x8 Phillips screws.

The front side of side bracket is recommended flat with a monitor. (figure 5,6)

(2)Rack bracket

(4)M4*8 phillips screw

Figure 4

Figure 5

RACK MOUNT BRACKET ASSEMBLY