Blue Ox BX88135 User Manual

BX88135 Installation Instructions

Adapter, BlueOx Baseplate to Duncan Towbar

1. Slide receiver connector (2) into the attachment tabs extending out from the vehicle.

2. Line up the large 1/2 inch holes and insert pins.

3. Place the retaining plate (6) on the top and bottom of the 1/2" threaded rod on the receiver connector.

4. Secure the plates with 1/2" hex nut and lock washer.

5. Center the cross angle (1) on the top plate of the receiver connectors and secure with 1/2 inch bolts, lock
washers, and hex nuts.

6. Install the tow bar and safety cables according to the instructions included in their packages.

7. DEALER OR INSTALLER: BE CERTAIN THE USER RECEIVES THE INSTRUCTION SHEET.

Parts List

Ref. No. Qty. Part No. Description

1 1 61-5365 ....................................................................................................Cross Angle

2 2 61-5360 ....................................................................................... Receiver Connector

3 4 201-0011 ................................................................................. 1/2-13 X 1 1/4 Hex Bolt

4 8 203-0012 .......................................................................................... 1/2 Lock Washer

5 8 202-0005 ..............................................................................................1/2-13 Hex Nut

6 4 102-5781 ............................................................................................. Retaining Plate

7 4 203-0005 ............................................................................................1/2 Flat Washer

E XXXXXX ..........................................................................................Blue Ox Baseplate

Automatic Equipment Mfg. Co.

One Mill Road, Industrial Park l Pender, Nebraska 68047

292-5592 7/99 1 of 1