Blomberg TKF 8461 AG50, WNF 7462 AE30 User Manual [dk]

Washing Machine Vaskemaskine
WNF 7462 AE30
User’s Manual
Brugsanvisning
2820523835_EN / 03-02-14.(16:28)Document Number
This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.
1.1 General safety
• This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack expe­rience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children must not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone.
• Never place the product on a carpet-covered floor. Otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.
• If the product has a failure, it should not be operated unless it is repaired by the Authorized Service Agent. There is the risk of electric shock!
• This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the pro­gramme" section.
• Connect the product to a grounded outlet protected by a 16 A fuse. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
• The water supply and draining hoses must be securely fastened and remain undama­ged. Otherwise, there is the risk of water leakage.
• Never open the loading door or remove the filter while there is still water in the drum. Otherwise, risk of flooding and injury from hot water will occur.
• Do not force open the locked loading door. The loading door will be ready to open just a few minutes after the washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.
• Unplug the product when not in use.
• Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
• Use detergents, softeners and supplements suitable for automatic washing machines only.
• Follow the instructions on the textile tags and on the detergent package.
• The product must be unplugged during installation, maintenance, cleaning and repai­ring procedures.
• Always have the installation and repairing procedures carried out by the Authorized
Service Agent
procedures carried out by unauthorized persons.
• If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone designa­ted by the importer in order to avoid possible risks.
. Manufacturer shall not be held liable for damages that may arise from
2 / EN
Washing Machine / User’s Manual
• Place the product on a rigid, flat and level surface.
• Do not place it on a long-pile rug or similar surfaces.
• Do not place the product on a high platform or near the edge on a cascaded surface.
• Do not place the product on the power cable.
• Never use sponge or scrub materials. These will damage the painted, chrome plated and plastic surfaces.
1.2 Intended use
• This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.
• The product must only be used for washing and rinsing of laundry that are marked accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage or transporta­tion.
1.3 Children's safety
• Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.
• Electrical products are dangerous for the children. Keep children away from the pro­duct when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product.
• Do not forget to close the loading door when leaving the room where the product is located.
• Store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package.
While washing the laundry at high temperatures, the loading door glass becomes hot. Therefore, keep especially the children away from the loading door of the machine while the washing operation is in progress.
1.4 Package information
• Packaging materials of the product are manufactured from recyclable materials in ac­cordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
1.5 Disposing of the waste product
• This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point. Help protect the environment and natural resour­ces by recycling used products. For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before dis­posing of the product.
3 / EN
Washing Machine / User’s Manual
1.6 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its servi­ce life. Take it to the collection center for the recycling of electrical and elec­tronic equipment. Please consult your local authorities to learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
2 Installation
Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
Preparation of the location and electrical, tap water and waste water installations at the place of installation is
C
under customer's responsibility.
warning: Installation and electrical connections of
the product must be carried out by the Authorized
B
Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
warning: Prior to installation, visually check if the product
has any defects on it. If so, do not have it installed.
A
Damaged products cause risks for your safety. Make sure that the water inlet and discharge hoses
as well as the power cable are not folded, pinched or
C
crushed while pushing the product into its place after installation or cleaning procedures.
2.1 Appropriate installation location
• Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.
• Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product at places where temperature may fall below 0ºC.
• Place the product at least 1 cm away from the edges of other furniture.
2.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.
2.3 Removing the transportation locks
warning: Do not remove the transportation locks before
taking out the packaging reinforcement.
A
warning: Remove the transportation safety bolts before
operating the washing machine! Otherwise, the product
A
will be damaged.
1. Loosen all the bolts with a suitable spanner until they rotate freely
2. Remove transportation safety bolts by turning them gently.
3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel.
C C
(C).
(P)
Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.
Never move the product without the transportation safety bolts properly fixed in place!
4 / EN
Washing Machine / User’s Manual
2.4 Connecting water supply
The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to
C
have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.
If you are going to use the double water-inlet product
(cold) water-inlet unit, you must install the
as a single
C
supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a blind stopper group.)
warning: Models with a single water inlet should not be
connected to the hot water tap. In such a case the laundry
A
will get damaged or the product will switch to protection mode and will not operate.
warning: Do not use old or used water inlet hoses on the
new product. It may cause stains on your laundry.
A
1. Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.
warning: Ensure that the cold and hot water connections
are made correctly when installing the product.
A
Otherwise, your laundry will come out hot at the end of the washing process and wear out.
2. Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
3. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.
2.5 Connecting to the drain
• The end of the drain hose must be directly connected to the wastewater drain or to the washbasin.
warning: Your house will be flooded if the hose comes
out of its housing during water discharge. Moreover, there
A
is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out.
• The hose should be attached to a height of at least 40 cm, and 100 cm at most.
• In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
100cm
40cm
• To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or do not drive it in the drain more than 15 cm. If it is too long, cut it short.
• The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.
• If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.
2.6 Adjusting the feet
warning: In order to ensure that the product operates
more silently and vibration-free, it must stand level and
A
balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level and balanced.
3. Tighten all lock nuts again by hand.
warning: Do not use any tools to loosen the lock nuts.
Otherwise, they will get damaged.
A
2.7 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in
5 / EN
Washing Machine / User’s Manual
accordance with the local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.
• The voltage specified in the "Technical specifications" section must be equal to your mains voltage.
• Do not make connections via extension cables or multi­plugs.
warning: Damaged power cables must be replaced by
the Authorized Service Agents.
B
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water that has remained in the product. (SEE
5.5)
4. Install transportation safety bolts in the reverse order of removal procedure; (SEE 2.3)
Never move the product without the transportation safety bolts properly fixed in place!
C
warning: Packaging materials are dangerous to children.
Keep packaging materials in a safe place away from
A
reach of the children.
3 Preparation
3.1 Sorting the laundry
• Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.
• Always obey the instructions given on the garment tags.
3.2 Preparing laundry for washing
• Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillow case.
• Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.
• Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.
• Place curtains in without compressing them. Remove curtain attachment items.
• Fasten zippers, sew loose buttons and mend rips and tears.
• Wash “machine washable” or “hand washable” labeled products only with an appropriate programme.
• Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.
• Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.
• Use only dyes/colour changers and limescale removers suitable for machine wash. Always follow the instructions on the package.
• Wash trousers and delicate laundry turned inside out.
• Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will reduce pilling.
• Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the machine. Such dusts and powders on the laundry may build up on the inner parts of the machine in time and can cause damage.
3.3 Things to be done for energy saving
Following information will help you use the product in an ecological and energy-efficient manner.
• Operate the product in the highest capacity allowed by the programme you have selected, but do not overload; see, "Programme and consumption table".
• Always follow the instructions on the detergent packaging.
• Wash slightly soiled laundry at low temperatures.
• Use faster programmes for small quantities of lightly soiled laundry.
• Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.
• If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.
• Do not use detergent in excess of the amount recommended on the detergent package.
3.4 Initial use
Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”. To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your product is not equipped with Drum Cleaning programme, perform the Initial Use procedure in accordance with the methods described under “5.2 Cleaning the loading door and the drum” section of the user manual.
Use an anti-limescale suitable for the washing machines.
C
Some water might have remained in the product due to the quality control processes in the production. It is not
C
harmful for the product.
3.5 Correct load capacity
The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired. The machine automatically adjusts the amount of water according to the weight of the loaded laundry.
warning: Follow the information in the “Programme
and consumption table”. When overloaded, machine's
A
washing performance will drop. Moreover, noise and vibration problems may occur.
6 / EN
Washing Machine / User’s Manual
Laundry type Weight (g)
Bathrobe Napkin Duvet cover Bed Sheet Pillowcase Tablecloth Towel Hand towel Evening gown Underclothing Men’s overalls Men’s shirt Men’s pajamas Blouses
1200 100 700 500 200 250 200 100 200 100 600 200 500 100
3.6 Loading the laundry
1. Open the loading door.
2. Place laundry items loosely into the machine.
3. Push the loading door to close until you hear a locking sound. Ensure that no items are caught in the door.
The loading door is locked while a programme is running. The door can only be opened a while after the programme
C
comes to an end.
warning: In case of misplacing the laundry, noise and
vibration problems may occur in the machine.
A
3.7 Using detergent and softener
When using detergent, softener, starch, fabric dye, bleach or limescale remover read the manufacturer's instructions
C
on the package carefully and follow the suggested dosage values. Use measuring cup if available.
Detergent Drawer
The detergent drawer is composed of three compartments: – (1) for prewash – (2) for main wash – (3) for softener – (*) in addition, there is siphon piece in the softener compartment.
3
1
2
• Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the laundry in the machine.
• If you are using liquid detergent, do not forget to place the liquid detergent cup into the main wash compartment (compartment nr. "2").
Choosing the detergent type
The type of detergent to be used depends on the type and colour of the fabric.
• Use different detergents for coloured and white laundry.
• Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) used solely for delicate clothes.
• When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.
• Wash woolens with special detergent made specifically for woolens.
warning: Use only detergents manufactured specifically
for washing machines.
A
warning: Do not use soap powder.
A
Adjusting detergent amount
The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.
• Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.
• Use lesser detergent for small amounts or lightly soiled clothes.
Using softeners
Pour the softener into the softener compartment of the detergent drawer.
• Do not exceed the (>max<) level marking in the softener compartment.
• If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer.
Using liquid detergents If the product contains a liquid detergent cup:
• Make sure that you have placed the liquid detergent cup in compartment nr. "2".
• If the liquid detergent has lost its fluidity, dilute it with water before putting in the detergent cup.
Detergent, softener and other cleaning agents
• Add detergent and softener before starting the washing programme.
• Never leave the detergent drawer open while the washing programme is running!
• When using a programme without prewash, do not put any detergent into the prewash compartment (compartment nr. "1").
• In a programme with prewash, do not put liquid detergent into the prewash compartment (compartment nr. "1").
7 / EN
If the product does not contain a liquid detergent cup:
• Do not use liquid detergent for the prewash in a programme with prewash.
• Liquid detergent stains your clothes when used with Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent.
Washing Machine / User’s Manual
Using gel and tablet detergent
Apply the following instructions when using tablet, gel and similar detergents.
• If the gel detergent thickness is fluidal and your machine does not contain a special liquid detergent cup, put the gel detergent into the main wash detergent compartment during first water intake. If your machine contains a liquid detergent cup, fill the detergent into this cup before starting the programme.
• If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly into the drum before washing.
• Put tablet detergents into the main wash compartment (compartment nr. "2") or directly into the drum before washing.
Tablet detergents may leave residues in the detergent compartment. If you encounter such a case, place the
C
tablet detergent between the laundry, close to the lower part of the drum in future washings.
Use the tablet or gel detergent without selecting the prewash function.
C
Using starch
• Add liquid starch, powder starch or the fabric dye into the softener compartment.
• Do not use softener and starch together in a washing cycle.
3.8 Tips for efficient washing
Light colours and whites Colours Dark colours
Heavily Soiled
(difficult stains such as grass, coffee, fruits and blood.)
Normally Soiled
(For example, stains
Soiling Level
caused by body on collars and cuffs)
Lightly Soiled
(No visible stains exist.)
(Recommended temperature range based on soiling level: 40-90ºC)
It may be necessary to pre­treat the stains or perform prewash. Powder and liquid detergents recommended for whites can be used at dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches.
Powder and liquid detergents recommended for whites can be used at dosages recommended for normally soiled clothes.
Powder and liquid detergents recommended for whites can be used at dosages recommended for lightly soiled clothes.
(Recommended temperature range based on soiling level: cold-40ºC)
Powder and liquid detergents recommended for colours can be used at dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches. Use detergents without bleach.
Powder and liquid detergents recommended for colours can be used at dosages recommended for normally soiled clothes. Use detergents without bleach.
Powder and liquid detergents recommended for colours can be used at dosages recommended for lightly soiled clothes. Use detergents without bleach.
• Wipe the inside of the machine with a damp and clean cloth after using starch.
Using bleaches
• Select a programme with prewash and add the bleaching agent at the beginning of the prewash. Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse and add the bleaching agent while the machine is taking water from the detergent compartment during first rinsing step.
• Do not use bleaching agent and detergent by mixing them.
• Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleaching agent onto the clothes and do not use it for coloured clothes.
• When using oxygen based bleaches, select a programme that washes at a lower temperature.
• Oxygen based bleaches can be used together with detergents; however, if its thickness is not the same with the detergent, put the detergent first into the compartment nr. "2" in the detergent drawer and wait until the detergent flows while the machine is taking in water. Add the bleaching agent from the same compartment while the machine is still taking in water.
Using limescale remover
• When required, use limescale removers manufactured specifically for washing machines only.
Clothes
Delicates/
Woolens/Silks
(Recommended temperature range based on soiling level: cold-40ºC)
Liquid detergents suitable for colours and dark colours can be used at dosages recommended for heavily soiled clothes.
Liquid detergents suitable for colours and dark colours can be used at dosages recommended for normally soiled clothes.
Liquid detergents suitable for colours and dark colours can be used at dosages recommended for lightly soiled clothes.
(Recommended temperature range based on soiling level: cold-30ºC)
Prefer liquid detergents produced for delicate clothes. Woolen and silk clothes must be washed with special woolen detergents.
Prefer liquid detergents produced for delicate clothes. Woolen and silk clothes must be washed with special woolen detergents.
Prefer liquid detergents produced for delicate clothes. Woolen and silk clothes must be washed with special woolen detergents.
8 / EN
Washing Machine / User’s Manual
4 Operating the product
4.1 Control panel
1
6 7
1 - Spin Speed Adjustment button 2 - Display 3 - Temperature Adjustment button 4 - Programme Selection knob
2
3
8
4.2 Display symbols
F3
F2
F1
a - Spin Speed indicator b - Temperature indicator c - Spin symbol d - Temperature symbol e - Remaining Time and Delayed Start indicator f - Programme Indicator symbols (Prewash / Main Wash /
Rinse / Softener / Spin) g - Economy symbol h - Delayed Start symbol i - Door Locked symbol j - Start symbol k - Pause symbol l - Auxiliary Function symbols m - No Water symbol
F4
4.3 Preparing the machine
Make sure that the hoses are connected tightly. Plug in your machine. Turn the tap on completely. Place the laundry in the machine. Add detergent and fabric softener.
4
5 - On / Off button 6 - Delayed Start buttons (+ / -) 7 - Auxiliary Function buttons 8 - Start / Pause / Cancel button
5
4.4 Programme selection
Select the programme suitable for the type, quantity and soiling degree of the laundry in accordance with the "Programme and consumption table" and the temperature table below.
90˚C
60˚C
40˚C­30˚C- Cold
Select the desired programme with the Programme Selection button.
C C
C C
Heavily soiled white cottons and linens. (coffee table covers, tableclothes, towels, bed sheets, etc.)
Normally soiled, coloured, fade proof linens, cottons or synthetic clothes (shirt, nightgown, pajamas, etc.) and lightly soiled white linens (underwear, etc.)
Blended laundry including delicate textile (veil curtains, etc.), synthetics and woolens.
Programmes are limited with the highest spin speed appropriate for that particular type of fabric.
When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature.
Always select the lowest required temperature. Higher temperature means higher power consumption.
For further programme details, see "Programme and consumption table"
4.5 Main programmes
Depending on the type of fabric, use the following main programmes.
• Bomuld (Cottons)
Use this programme for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing cycle.
• Syntetisk (Synthetics)
9 / EN
Washing Machine / User’s Manual
Use this programme to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme. For curtains and tulle, use the Synthetic 40˚C programme with prewash and anti-creasing functions selected. As their meshed texture causes excessive foaming, wash the veils/ tulle by putting little amount of detergent into the main wash compartment. Do not put detergent in the prewash compartment.
• Uld (Woollens)
Use this programme to wash your woolen clothes. Select the appropriate temperature complying with the tags of your clothes. Use appropriate detergents for woolens.
4.6 Additional programmes
For special cases, additional programmes are available in the machine.
Additional programmes may differ according to the model of the machine.
C
• Bomuld Eco (Cotton Economic)
You may wash your normally soiled durable cotton and linen laundry in this programme with the highest energy and water saving compared to all other wash programmes suitable for cottons. Actual water temperature may differ from the declared cycle temperature. Programme duration may automatically be shortened during later stages of the programme if you wash less amount (e.g. ½ capacity or less) of laundry. In this case energy and water consumption will be further decreased giving you the opportunity for a more economical wash. This feature is available for certain models having remaining time display.
• Hygiejne (Hygiene)
Use this programme to wash baby laundry, and the laundry that belongs to allergic persons. Longer heating time and an additional rinsing step provide a higher level of hygiene.
• Håndvask (Hand wash)
Use this programme to wash your woolen/delicate clothes that bear “not machine- washable” tags and for which hand wash is recommended. It washes laundry with a very gentle washing action to not to damage clothes.
• Daglig Ekspres (Daily Express)
Use this programme to wash your lightly soiled cotton clothes in a short time.
• Super Kort Ekspres (Super Short Express)
Use this programme to wash your little amount of lightly soiled cotton clothes in a short time.
• Mørk Vask (Darkcare)
Use this programme to wash your dark coloured laundry or the laundry that you do not want it get faded. Washing is performed with little mechanic action and at low temperatures. It is recommended to use liquid detergent or woolen shampoo for dark coloured laundry.
• Intensivt (Intensive)
You can wash your durable and heavily soiled clothes on this program. This program washes for a longer time and an extra rinse cycle will be made compared to the “Cottons” program. You can use it for your heavily soiled clothes that you wish to be rinsed gently.
• Linned (Lingerie)
Use this programme to wash delicates such as underwears. If there is little amount of laundry, use a laundry net.
• Genopfriske (Freshen Up)
Use this programme to remove the odour on the laundry that are worn only for once and do not contain any stains or dirt.
• Bomuld 20° (Eco Clean)
Use this programme, which is much more sensitive to environment and natural resources, to wash your lightly soiled and unstained cotton laundry (max. 3.5 kg) in a short time and economically.
It is recommended to use liquid detergent or gel washing detergent.
C
• Rensning af tromle (Self Clean)
Use this programme regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Run the programme without any laundry in the machine. To obtain better results, put powder limescale remover for washing machines into the detergent compartment II. When the programme is over, leave the loading door ajar so that the inside of the machine gets dry.
This is not a washing programme. It is a maintenance programme.
C
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that there is a load inside and aborts the programme.
C
4.7 Special programmes
For specific applications, select any of the following programmes.
• Skylle (Rinse)
Use this programme when you want to rinse or starch separately.
• Centrifugering + Pumpe (Spin + Drain)
Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine. Before selecting this programme, select the desired spin speed and press Start / Pause / Cancel button. The machine will spin the laundry with the set spin speed and drain the water coming out of them. If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start / Pause / Cancel button.
Use a lower spin speed for delicate laundries.
C
10 / EN
Washing Machine / User’s Manual
4.8 Temperature selection
Whenever a new programme is selected, the maximum temperature for the selected programme appears on the temperature indicator. To decrease the temperature, press the Temperature Adjustment button. Temperature decreases with increments of 10° and finally, “-” symbol indicating the cold wash option appears on the display.
If you scroll to cold wash option and press Temperature Adjustment button again, the recommended
C
temperature for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the temperature.
Economy symbol
Indicates the programmes and temperatures that provide energy savings.
Economy symbol can not be selected in Intensive and Hygiene programmes since washing is performed in
C
long times and at high temperatures in order to provide hygiene. Similarly, Economy symbol can not be selected in Baby, Refresh, Drum Cleaning, Spin and Rinse programmes as well.
4.9 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator. To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See "Auxiliary function selection" section for explanations of these options.
Rinse Hold option is indicated with “ ” symbol and No Spin option is indicated with “ ” symbol.
C
Indicative values for Synthetics programmes (EN)
Remaining Moisture
Content (%) **
Load (kg)
Water
Consumption (l)
Energy
Consumption
(kWh)
Programme
Duration (min) *
Synthetics 60
Synthetics 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
11 / EN
3 45 1.00 01:48 45 40
3 45 0.45 01:23 45 40
≤ 1000 rpm > 1000 rpm
Remaining Moisture
Content (%) **
Washing Machine / User’s Manual
4.10 Programme and consumption table
EN
Programme (°C)
Bomuld 90 7 74 2.30 1600 • • • • • 90-Cold Bomuld 60 7 72 1.50 1600 • • • • • 90-Cold Bomuld 40 7 72 0.85 1600 • • • • • 90-Cold Hygiejne 90 7 66 2.70 1600 * 90-30 Bomuld Eco 60** 7 44 0.81 1600 60-Cold Bomuld Eco 60** 3.5 38 0.76 1600 60-Cold Bomuld Eco 40** 3.5 38 0.65 1600 60-Cold Bomuld Eco 40 7 64 0.72 1600 60-Cold Syntetisk 60 3 45 1.00 1200 • • • • • 60-Cold Syntetisk 40 3 45 0.45 1200 • • • • • 60-Cold Bomuld 20° 20 3.5 39 0.16 1600 20 Linned 30 1 54 0.24 1200 30-Cold Intensivt 60 7 66 1.40 1600 * • • 60-40 Super Kort Ekspres 30 2 35 0.10 1400 30-Cold Daglig Ekspres 90 7 60 2.00 1400 90-Cold Daglig Ekspres 60 7 60 1.15 1400 90-Cold Daglig Ekspres 30 7 70 0.20 1400 90-Cold Uld 40 1.5 56 0.30 1200 40-Cold Håndvask 30 1 40 0.25 1200 30-Cold Mørk Vask 40 3 82 0.55 1200 * 40-Cold Rensning af tromle 70 - 100 1.70 800 * 70 Genopfriske - 2 20 0.03 1200 -
• : Selectable * : Automatically selected, no cancelling. ** : Energy Label programme (EN 60456 Ed.3) *** If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.
- : See the programme description for maximum load.
** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the
2
Max. Load (kg)
Water Consumption (l)
Energy Consumption (kWh)
symbols on the panel.
Auxiliary functions
Max. Speed***
Forvask
Hurtig Vask
Ekstra Skylning
temperature range
Anti-krøl
Rinse Hold
Selectable
°C
C C C
12 / EN
The auxiliary functions in the table may vary according to the model of your machine.
Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. “Selectability of auxiliary functions might be changed by the manufacturer. New selectabilities might be added or existing ones might be removed.” “The spin speed of your machine may vary among the programmes, however this speed cannot exceed the max. spin speed of your machine.”
Washing Machine / User’s Manual
Loading...
+ 28 hidden pages