Blomberg WNF63211 User Manual
Washing Machine
WNF63211
User‘s Manual
2820524674/ 08-04-15.(12:39)Document Number
2 / EN
Washing Machine /User’s Manual
Please read this user manual first!
Dear Customer,
Thank you for prefering an Blomberg product. We hope that you get the best results from your product
which has been manufactured with high quality and state-of-the-art technology. Therefore, please read
this entire user manual and all other accompanying documents carefully before using the product and
keep it as a reference for future use. If you handover the product to someone else, give the user manual
as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences between
models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
C
Important information or useful hints
about usage.
A
Warning for hazardous situations with
regard to life and property.
B
Warning for electric shock.
Packaging materials of the product are
manufactured from recyclable materials
in accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local authorities.
3 / EN
1 General safety instructions 4
1.1 Life and property safety . . . . . . . . . . . . . . . .4
1.2 Children’s safety. . . . . . . . . . . . . . . . . . . . . .4
1.3 Electrical safety . . . . . . . . . . . . . . . . . . . . . .5
1.4 Hot surface safety. . . . . . . . . . . . . . . . . . . . .6
1.5 Compliance with WEEE Directive. . . . . . . . . . 6
1.6 Package information. . . . . . . . . . . . . . . . . . .6
1.7 Intended use . . . . . . . . . . . . . . . . . . . . . . . .6
2 Your washing machine 7
2.1 Technical specifications . . . . . . . . . . . . . . . .7
2.2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.3 Package Contents . . . . . . . . . . . . . . . . . . . .9
3 Installation 10
3.1 Appropriate installation location. . . . . . . . . . 10
3.2 Removing packaging reinforcement . . . . . .10
3.3 Removing the transportation locks. . . . . . . .10
3.4 Connecting water supply. . . . . . . . . . . . . . .11
3.5 Connecting to the drain. . . . . . . . . . . . . . . .11
3.6 Adjusting the feet . . . . . . . . . . . . . . . . . . . . 12
3.7 Electrical connection. . . . . . . . . . . . . . . . . . 13
4 Preparation 15
4.1 Sorting the laundry . . . . . . . . . . . . . . . . . . .15
4.2 Preparing laundry for washing. . . . . . . . . . . 16
4.3 Things to be done for energy saving . . . . . .16
4.4 Initial use . . . . . . . . . . . . . . . . . . . . . . . . . .16
4.5 Correct load capacity . . . . . . . . . . . . . . . . . 17
4.6 Loading the laundry . . . . . . . . . . . . . . . . . .17
4.7 Using detergent and softener . . . . . . . . . . .17
4.8 Tips for efficient washing . . . . . . . . . . . . . .20
5 Operating the product 21
5.1 Control panel . . . . . . . . . . . . . . . . . . . . . . .21
5.2 Preparing the machine . . . . . . . . . . . . . . . .21
5.3 Programme selection . . . . . . . . . . . . . . . . .21
5.4 Main programmes . . . . . . . . . . . . . . . . . . .22
5.5 Additional programmes . . . . . . . . . . . . . . .22
5.6 Special programmes. . . . . . . . . . . . . . . . . .23
5.7 Temperature selection. . . . . . . . . . . . . . . . . 23
5.8 Spin speed selection. . . . . . . . . . . . . . . . . .23
5.9 Programme and consumption table. . . . . . .24
5.10 Auxiliary function selection . . . . . . . . . . . .26
5.11 Starting the programme . . . . . . . . . . . . . .27
5.12 Child Lock . . . . . . . . . . . . . . . . . . . . . . . .27
5.13 Progress of programme . . . . . . . . . . . . . . 28
5.14 Loading door lock. . . . . . . . . . . . . . . . . . .28
5.15 Changing the selections after programme
has started . . . . . . . . . . . . . . . . . . . . . . .28
5.16 Canceling the programme. . . . . . . . . . . . .29
5.17 End of programme . . . . . . . . . . . . . . . . . .29
5.18 Your machine is equipped with a “Standby
Mode”. . . . . . . . . . . . . . . . . . . . . . . . . . .29
6 Quick User Guide 30
6.1 Preparing the machine . . . . . . . . . . . . . . . .30
6.2 Programme selection . . . . . . . . . . . . . . . . .30
6.3 Auxiliary function selection . . . . . . . . . . . . .30
6.4 Starting the programme . . . . . . . . . . . . . . .30
6.5 Changing the selections after programme has
started. . . . . . . . . . . . . . . . . . . . . . . . . . .30
6.6 Canceling the programme. . . . . . . . . . . . . .30
7 Maintenance and cleaning 31
7.1 Cleaning the detergent drawer . . . . . . . . . .31
7.2 Cleaning the loading door and the drum . . .31
7.3 Cleaning the body and control panel . . . . . .32
7.4 Cleaning the water intake filters . . . . . . . . .32
7.5 Draining remaining water and cleaning the
pump filter. . . . . . . . . . . . . . . . . . . . . . . .32
8 Troubleshooting 34
TABLE OF CONTENTS
4 / EN
Washing Machine /User’s Manual
1 General safety instructions
This section includes security instructions which may help prevent the injuries
and material damage risks. All kinds of warranties shall be invalid if these
instructions are not observed.
1.1 Life and property safety
• Never place the product on a carpet-covered floor. Electrical parts will get
overheated since air cannot circulate from under the device. This will cause
problems with your product.
• Unplug the product if it is not in use.
• Always have the installation and repairing procedures carried out by the
Authorized Service Agent. Manufacturer shall not be held liable for damages
that may arise from procedures carried out by unauthorized persons.
• The water supply and draining hoses must be securely fastened and remain
undamaged. Otherwise, water leak may occur.
• While there is still water inside the product, never open the loading door or
remove the filter. Otherwise, risk of flooding and injury from hot water will
occur.
• Do not force open the locked loading door. Door can be opened a few minutes
after the washing cycle ends. In case of forcing the loading door to open, the
door and the lock mechanism may get damaged.
• Use detergents, softeners and supplements suitable for automatic washing
machines only.
• Follow the instructions on the label of textiles and the detergent package.
1.2 Children’s safety
• This product can be used by the children who are at the age of 8 and
over and the people whose physical, sensory or mental skills are not
fully developed or who do not have necessary required experience and
knowledge as long as they are supervised or trained about the safe use of
the product and its risks. Children should not play with the device. Cleaning
and maintenance works should not be performed by children unless they are
supervised by someone. Children of less than 3 years should be kept away
unless continuously supervised.
• Packaging materials may be dangerous for the children. Keep packaging
materials in a safe place away from reach of the children.
• Electrical products are dangerous for the children. Keep the children away
from the product when it is in use. Do not allow them to play with the product.
Use child lock to prevent children from intervening with the product.
Washing Machine /User’s Manual
5 / EN
Important instructions for safety and environment
• Do not forget to close the loading door when leaving the room where the
product is located.
• store all detergents and additives in a safe place away from the reach of
the children by closing the cover of the detergent container or sealing the
detergent package.
1.3 Electrical safety
• If the product has a failure, it should not be operated unless it is repaired by
the Authorized Service Agent. Risk of electric shock!
• This product is designed to resume operating in the event of powering on after
a power interruption. If you wish to cancel the programme, see “Cancelling the
programme” section.
• Plug the product into a grounded outlet protected by a 13 A fuse. Do not
neglect to have the grounding installation made by a qualified electrician. Our
company shall not be liable for any damages that will arise when the product
is used without grounding in accordance with the local regulations.
• Do not wash the product by spraying or pouring water onto it! Risk of electric
shock!
• Never touch the power cable plug with wet hands! Do not grab the power cord
to unplug the machine, always unplug it by holding the socket with one hand,
and pulling the plug with the other hand.
• Product should be unplugged during installation, maintenance, cleaning and
repair procedures.
• If the power cable is damaged, it must be replaced by the manufacturer,
after sales service or a similarly qualified person (preferably an electrician) or
someone designated by the importer in order to avoid possible risks.
6 / EN
Washing Machine /User’s Manual
Important instructions for safety and environment
1.4 Hot surface safety
While washing the laundry at high temperatures, the
loading door glass will get hot. Considering this fact,
during washing operation keep the children away
from the loading door of the product to prevent them
.touching it
1.5 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This
product bears a classification symbol for waste electrical and
electronic equipment (WEEE).
This product has been manufactured with high quality parts and
materials which can be reused and are suitable for recycling. Do not
dispose of the waste product with normal domestic and other wastes
at the end of its service life. Take it to the collection center for the recycling of
electrical and electronic equipment. Please consult your local authorities to learn
about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/
EU). It does not contain harmful and prohibited materials specified in the
Directive.
1.6 Package information
Packaging materials of the product are manufactured from recyclable materials
in accordance with our National Environment Regulations. Do not dispose of the
packaging materials together with the domestic or other wastes. Take them to
the packaging material collection points designated by the local authorities.
1.7 Intended use
• This product has been designed for domestic use. It is not for commercial
purposes or it should not be used out of its intended use.
• The product must only be used for washing and rinsing of laundry that are
marked accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage or
transportation.
• The service life of your product is 10 years. During this period, original spare
parts will be available to operate the appliance properly.
Washing Machine /User’s Manual
7 / EN
2 Your washing machine
2.1 Technical specifications
Complying Commission Delegated Regulation (EU) No 1061/2010
Supplier name or trademark Blomberg
Model name WNF63211
Rated capacity (kg) 6
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A++
Annual Energy Consumption (kWh)
(1)
164
Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.847
Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0.682
Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0.557
Power consumption in ‘off-mode’ (W) 0.250
Power consumption in ‘left-on mode’ (W) 1.000
Annual Water Consumption (l)
(2)
8800
Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) B
Maximum spin speed (rpm) 1200
Remaining moisture Content (%) 53
Standard cotton programme
(3)
Cotton Eco 60°C and 40°C
Programme time of the standard 60°C cotton programme at full load (min) 185
Programme time of the standard 60°C cotton programme at partial load (min) 148
Programme time of the standard 40°C cotton programme at partial load (min) 138
Duration of the left-on mode (min) N/A
Airborne acoustical noise emissions washing/spinning (dB) 59/72
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 47
Net weight (±4 kg.) 62
Single Water inlet / Double Water inlet
• / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 929
(1)
Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the
consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(2)
Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
(3)
“Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information
in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient
programmes in terms of combined energy and water consumption.
Technical specifications may be changed without prior notice to improve the quality of the product.
8 / EN
Washing Machine /User’s Manual
Your washing machine
7
3
4
6
5
2
1
8
1- Power cable
2- Top panel
3- Control panel
4- Filter cap
5- Adjustable feet
6- Loading door
7- Detergent drawer
8- Drain hose
2.2 Overview
Washing Machine /User’s Manual
9 / EN
Your washing machine
2.3 Package Contents
1
2
3 4
a
b
c
5
6
7
8
1- Power cable
2- Drain hose
3- Transportation safety bolts *
4- Mains water inlet hose (One of the following filter types is used for the mains hose connection.)
a- Electronical water shut-off
b- Mechanical water shut-off
c- Standard
5- Liquid detergent container**
6- User Manual
7- Blind plug***
8- Plastic plug group
* Number of transportation safety bolts may change depending on the model of your machine.
** This may be supplied with the machine depending on the model of your machine.
*** This is supplied if your machine is equipped with double water inlet.
10 / EN
Washing Machine /User’s Manual
3 Installation
Refer to the nearest Authorised Service Agent for
installation of the product. To make the product
ready for use, review the information in the user
manual and make sure that the electricity, tap
water supply and water drainage systems are
appropriate before calling the Authorised Service
Agent. If they are not, call a qualified technician
and plumber to have any necessary arrangements
carried out.
C
Preparation of the location and
electrical, tap water and waste
water installations at the place of
installation is under customer's
responsibility.
Make sure that the water inlet and
discharge hoses as well as the power
cable are not folded, pinched or
crushed while pushing the product
into its place after installation or
cleaning procedures.
B
WARNING: Manufacturer shall not
be held liable for damages that may
arise from procedures carried out by
unauthorised persons.
A
WARNING: Prior to installation,
visually check if the product has any
defects on it. If so, do not have it
installed. Damaged products cause
risks for your safety.
3.1 Appropriate installation location
• Place the machine on a rigid floor. Do not place
it on a long pile rug or similar surfaces.
• Total weight of the washing machine and the
dryer -with full load- when they are placed
on top of each other reaches to approx. 180
kilograms. Place the product on a solid and flat
floor that has sufficient load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product at places where
temperature may fall below 0ºC.
• Place the product at least 1 cm away from the
edges of other furniture.
3.2 Removing packaging
reinforcement
Tilt the machine backwards to remove the
packaging reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
3.3 Removing the
transportation locks
A
WARNING: Do not remove the
transportation locks before taking
out the packaging reinforcement.
WARNING: Remove the
transportation safety bolts before
operating the washing machine!
Otherwise, the product will be
damaged.
1. Loosen all the bolts with a suitable spanner until
they rotate freely (C).
2. Remove transportation safety bolts by turning
them gently.
3. Attach the plastic covers supplied in the User
Manual bag into the holes on the rear panel. (P)
Washing Machine /User’s Manual
11 / EN
Installation
C
Keep the transportation safety
bolts in a safe place to reuse when
the washing machine needs to be
moved again in the future.
Never move the product without
the transportation safety bolts
properly fixed in place!
3.4 Connecting water supply
C
The water supply pressure required
to run the product is between 1 to 10
bars (0.1 – 1 MPa). It is necessary to
have 10 – 80 liters of water flowing
from the fully open tap in one minute
to have your machine run smoothly.
Attach a pressure reducing valve if
water pressure is higher.
If you are going to use the double
water-inlet product as a single (cold)
water-inlet unit, you must install the
supplied stopper to the hot water
valve before operating the product.
(Applies for the products supplied
with a blind stopper group.)
A
WARNING: Models with a single
water inlet should not be connected
to the hot water tap. In such a case
the laundry will get damaged or the
product will switch to protection
.mode and will not operate
WARNING: Do not use old or used
water inlet hoses on the new product.
It may cause stains on your laundry.
1. Connect the special hoses supplied with the
product to the water inlets on the product. Blue
hose (right) (max. 25 ºC) is for cold water inlet.
A
WARNING: Ensure that the cold and
hot water connections are made
correctly when installing the product.
Otherwise, your laundry will come out
hot at the end of the washing process
and wear out.
2. Tighten all hose nuts by hand. Never use a tool
when tightening the nuts.
3. Open the taps completely after making the
hose connection to check for water leaks at
the connection points. If any leaks occur, turn
off the tap and remove the nut. Retighten the
nut carefully after checking the seal. To prevent
water leakages and damages caused by them,
keep the taps closed when the machine is not
in use.
3.5 Connecting to the drain
• The end of the drain hose must be directly
connected to the wastewater drain or to the
washbasin.
• Drain hose shall be attached to a wall drain,
stand pipe or sink siphon connected to the foul
water drain, do not connect to surface water
drains.
12 / EN
Washing Machine /User’s Manual
Installation
A
WARNING: Your house will be
flooded if the hose comes out of
its housing during water discharge.
Moreover, there is risk of scalding
due to high washing temperatures!
To prevent such situations and to
ensure smooth water intake and
discharge of the machine, fix the
end of the discharge hose tightly so
that it cannot come out.
• The hose should be attached to a height of at
least 40 cm, and 100 cm at most.
• In case the hose is elevated after laying it on
the floor level or close to the ground (less than
40 cm above the ground), water discharge
becomes more difficult and the laundry may
come out excessively wet. Therefore, follow the
heights described in the figure.
100cm
40cm
• To prevent flowing of dirty water back into the
machine and to allow for easy discharge, do not
immerse the hose end into the dirty water or do
not drive it in the drain more than 15 cm. If it is
too long, cut it short.
• The end of the hose should not be bent, it
should not be stepped on and the hose must
not be pinched between the drain and the
machine.
• If the length of the hose is too short, use it by
adding an original extension hose. Length of the
hose may not be longer than 3.2 m. To avoid
water leak failures, the connection between
the extension hose and the drain hose of the
product must be fitted well with an appropriate
clamp as not to come off and leak.
3.6 Adjusting the feet
A
WARNING: In order to ensure that the
product operates more silently and
vibration-free, it must stand level
and balanced on its feet. Balance
the machine by adjusting the feet.
Otherwise, the product may move
from its place and cause crushing
and vibration problems.
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level
and balanced.
3. Tighten all lock nuts again by hand.
Loading...