Blodgett CTRE-2 User Manual
Project
Item No.
Quantity
RPR/DBRI Roll in Pan Rack/Basket
MODEL RPR/DBRI SERIES
Roll-In Pan Racks/Basket Dolly
RPR-L9 / RPR-S9
DBRI-L / DBRI-S
All data is shown per oven section, unless otherwise indicated.
EXTERIOR/EXTERIOR CONSTRUCTION
ROLL-IN PAN RACK - MODEL RPR-L9
(For use with DFG-200, Mark V-200, Zephaire-200-E, Zephaire-200G)
16 gauge (1.48mm) welded, riveted stainless steel vertical frame
9 position rack supports, 1-5/8” (41mm) spacing
5 chrome plated wire racks 26” x 26” (660mm x 660mm)
19-1/4” H x 27-3/8” W x 26-1/2” D (489mm x 695mm x 673mm)
ROLL-IN PAN RACK - MODEL RPR-S9
(For use with DFG-100, MARK V-100, Zephaire-100-E, Zephaire-100-G)
16 gauge (1.48mm) welded, riveted stainless steel vertical frame
9 position rack supports, 1-5/8” (41mm) spacing
5 chrome plated wire racks 26” x 26” (660mm x 660mm)
19-1/4” H x 27-3/8” W x 19-1/2” D (489mm x 695mm x 495mm)
ROLL-IN BASKET DOLLY - MODEL DBRI-L
(For use with DFG-200, Mark V-200, Zephaire-200-E, Zephaire-200-G)
26 -1/2” L x 27-3/8” W (673mm x 695mm) frame
Two 13-1/2” x 25-7/8” (343mm x 657mm) baskets per tier
ROLL-IN BASKET DOLLY - MODEL DBRI-S
(For use with DFG-100, MARK V-100, Zephaire-100-E, Zephaire-100G)
21-1/8” L x 27-3/8” W (537mm x 695mm) frame
Two 13-1/2” x 20-3/4” (343mm x 527mm) baskets per tier
STANDARD FEATURES
11 gauge (2.90mm) #430 Stainless steel angle welded dolly frame
1-5/8” (41mm) brass caster wheels
Two year limited parts and labor warranty*
* For all international markets, contact your local distributor.
BLODGETT OVEN COMPANY
www.blodgett.com • 44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
CART MODELS
TOPOF TRACK
SIDE VIEW
TOPOF TRACK
15-11/16”
(398mm)
+1/2
-0
+13
-0
6-9/16”
(167mm)
49-9/16” 1/2
(1259mm 13)++
47-13/16” 1/2
(1214mm 13)++
CART CTRG-2
CART CTRE-2
TOPOF TRACK
TOPOF TRACK
43-3/16” 1/2
(12097mm 13)++
6-9/16”
(167mm)
12-3/8”
(314mm)
+1/2
-0
+13
-0
41-17/16” 1/2
(1053mm 13)++
CART CTRE
TOPOF TRACK
12-3/8”
(314mm)
+1/2
-0
+13
-0
6-9/16”
(167mm)
38-1/4”
(972mm)
5-1/2”
(140mm)
TOP VIEW
3-11/16”
(94mm)
20”
(508mm)
SIDE VIEW
38-1/4”
(972mm)
CTRE-2, CTRG, CTRG-2
27-5/8”
(702mm)
33-1/8” (841mm)
5-1/2”
(140mm)
TOPOF TRACK
5-3/8”
(137mm)
16-5/8”
(422mm)
27-3/8”
(695mm)
TOP VIEW
7/16” (11mm)
30-1/4” (768mm)
APPROVAL/STAMP
27-3/8”
16-5/8”
(422mm)
5-3/8”
(137mm)
(695mm)
+1/2
15-11/16”
-0
+13
6-9/16”
(167mm)
CART CTRG
(398mm)
-0
SHORT FORM SPECIFICATIONS - Frame constructed of .125 (3.18mm) formed aluminum sheet. Dolly channels of 1 1/2” x 1/2” x 1/8” x 24” (38mm x 12.7mm x 3.18mm x 610mm)
aluminum extrusion.Handle to be 7/8” (22mm) O.D. tubing. To have docking and locking assembly with alignment pin. Four 5”(127mm) diameter swivel type casters (two with brakes),
hard rubber ball bearing type, NSF approved.
NOTE: The company reserves the right to make substitutions of components without prior notice
BLODGETT OVEN COMPANY
Printed in U.S.A.
www.blodgett.com • 44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
NOTE: FOR COMMERCIAL USE ONLY
P/N 35047 Rev D (2/14)
Loading...