Blaupunkt PALM BEACH C51 User Manual 2
Operating instructions
Radio / Cassette
Palm Beach C51
DEUTSCH
ENGLISH
2
4
1
3
6
5
798
10
11
1213141516
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
3
CONTROLS
1 - button for unlatching the re-
movable release panel
2 V olume control
3 Button for switching the de vice
on and off and for muting the device
4 RDS - button, for s witching the
RDS (Radio Data System) convenience function on or off
Select display of running texts
5 BND - (band) button for the se-
lection of the radio source, selection of the FM memory levels
and the MW or LW wavebands
TS starts the Trav elstore function
6 Display
7
- button for display of the
clock time
DIS, to change the contents of
the display
8 MENU - button, which calls up
the basic settings menu
9
- button for opening the flip-
release panel
: Arrow keys
; OK - button, for confirmation of
menu entries and for starting the
scan function
< DEQ - (Digital Equalizer) button,
for switching the equaliz er on
and off
= AUD - (Audio) button f or adjust-
ing bass, treble, balance and
fader
LD, for switching the loudness
function (hearing-weighted volume adaptation) on and off
> Buttons 1 - 6
? TRAF - (Traffic) button, f or
switching the traffic announcements on and off
@ CCD•C -button for choosing be-
tween tape cassette, CD-changer (if connected) and AUX
DEUTSCH
ENGLISH
FRANÇAIS
IT ALIANO
NEDERLANDS
SVENSKA
31
ESPAÑOL
PORTUGUÊS
TABLE OF CONTENTS
Notes and accessories .......... 33
Road Safety .................................. 33
Fitting............................................ 33
Accessories .................................. 33
Release Panel ........................ 34
Switching On and Off............. 35
Adjusting the Volume............. 36
Radio Operation ..................... 38
Switching on Radio Operation ....... 38
RDS Convenience Function
(AF, REG) ..................................... 38
Select Waveband/Memory Level ... 38
Setting the Station ......................... 39
Adjusting the Sensitivity of the
Station Search .............................. 39
Saving a Station ............................ 39
Saving a Station Automatically
(Travelstore) .................................. 40
Activating a Preset Station ............. 40
Scanning through Receivable
Stations (SCAN) ........................... 40
Adjusting the Scan Time ................ 40
Program Type (PTY) ...................... 40
Optimising Radio Reception .......... 42
Select Display of Running Texts ..... 42
Adjusting the Display ..................... 42
Traffic Information.................. 43
Cassette Operation ................ 44
Cassette Play ................................ 44
Cassette Ejection .......................... 44
Changing the Direction of Play ...... 44
Skipping Tracks (S-CPS) .............. 44
Playing a Track Repeatedly............ 44
Sampling All the Tracks on a
Cassette (SCAN) .......................... 44
Changing the Display .................... 45
Resetting the Tape Counter ........... 45
Fast Winding................................. 45
Pausing During Play ...................... 45
32
Switching the Radio Monitor
On and Off .................................... 45
Skipping Blank Tape ...................... 46
Choosing the Tape Type ................ 46
Dolby* B Noise Suppression ......... 46
Traffic Information with Cassette
Operation ...................................... 46
CD Changer Operation .......... 47
Starting CD Changer Operation .... 47
Selecting a CD.............................. 47
Selecting a Track ........................... 47
Fast Searching (Audible) ............... 47
Changing the Display .................... 47
Repeat Play of Individual Tracks
or Whole CDs (REPEAT)............... 47
Playing Tracks in Random
Sequence (MIX) ............................ 47
Sampling All Tracks on All CDs
(SCAN) ......................................... 48
Pausing During Play ...................... 48
Naming CDs ................................. 48
Clock - Time ........................... 49
Tone and Volume Distribution 51
Adjusting the Bass ........................ 51
Adjusting the Treble ....................... 51
Adjusting the Left/
Right Volume Balance.................... 51
Setting the Front/Rear Volume
Distribution (Fader)........................ 51
Loudness................................ 52
Equalizer ................................ 52
External Audio Sources ......... 55
TMC for Dynamic Navigation
Systems ................................. 55
Technical data ........................ 56
Guarantee .............................. 56
Installation instructions ........ 221
NOTES AND ACCESSORIES
Thank you for choosing a Blaupunkt
product. We hope that you will enjo y your
new equipment.
Please read these instructions before
you use if for the first time. The Blaupunkt editors are constantly working to
write usage instructions in a clear and
generally understandable form. If, nevertheless, you have questions about
how to use your equipment, please refer to your dealer or to the telephone
hotline in your country. You will find the
telephone numbers at the back of this
booklet.
Road Safety
Road saf ety has the first priority .
Only make adjustments to your car
radio when the traffic conditions allow . F amiliarise yourself with the device before you start driving.
You must be able to hear audible
alarms from police vehicles, fire engines or ambulances promptly inside
the vehicle.
You must therefore listen at an appropriate volume when travelling.
Fitting
If you want to fit your car radio y ourself ,
read the fitting and connecting notes at
the end of the guide.
Accessories
Only use accessories approved by Blaupunkt.
Remote control
The optional RC 08 and RC 10 remote
control units allow you to control your
car radio's basic functions safely and
conveniently from the steering wheel.
Amplifiers
Any Blaupunkt amplifier can be used.
CD changer
The following Blaupunkt CD changers
can be connected:
CDC A 06, CDC A 08, CDC A 072 or
IDC A 09.
The use of an adapter cable (Blaupunkt
no. 7 607 889 093) also allows the CDC
A 05 or CDC A 071 CD changers to be
connected.
Subwoofer
You have the option of connecting an
active low-frequency loudspeaker (a
subwoofer) to your device.
It is connected via a Blaupunkt cable
(Blaupunkt no. 7 607 609 093), which
you can obtain from your accessory
dealer.
You will find more detailed information
in the fitting instructions later in this
booklet.
DEUTSCH
ENGLISH
FRANÇAIS
IT ALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
33
PORTUGUÊS
RELEASE PANEL
Release Panel
Theft Protection
Y our de vice has a removable flip-release
panel to protect it from theft.
The radio is of no value to a thief without this panel.
Protect your device from theft b y taking
the release panel with you whenever
you leave the vehicle. Do not leave the
panel in the car, e ven in a hidden place.
The release panel has been constructed is such a way as to make it easy to
handle.
Note:
● Do not drop the panel.
● Do not expose the panel to direct
sunshine or any other source of
heat.
● Keep the operating panel in the
case supplied.
● Av oid touching the contacts on the
panel with your skin. If necessary,
clean the contacts using a lint-free
cloth dipped in alcohol.
Removing the Release Panel
1
➮ Press the button, 1.
The panel is unlatched.
➮ Pull the panel off the device, first
straight forward and then to the left.
● When the release panel has been
separated from the device, it
switches itself off.
● Any current settings are saved.
● If a cassette has been inserted it
remains in the device.
Attaching the Release Panel
➮ Push the panel into the guides on
the device from left to right.
➮ Push the left hand side of the panel
into the device until it engages.
Note:
● Do not press the display as you in-
sert the panel.
If the device was s witched on when the
panel was removed, it will switch itself
back on automatically with the last settings (radio, cassette, CD-changer or
AUX) as soon as the panel is replaced.
34
SWITCHING ON AND OFF
Switching On and Off
The following methods are av ailable f or
switching the device on or off:
Switching On and Off with the
Vehicle Ignition
If the device is correctly connected to
the vehicle ignition, and has not been
switched off with the main button, 3, it
is switched on and off along with the
ignition.
Y ou can also s witch the device on when
the ignition is off:
➮ Press the main button, 3.
Note:
● In order to protect the vehicle bat-
tery , the device is automatically
switched off after an hour if the vehicle ignition is off.
Switching On and Off with the
release panel
➮ Remove the release panel.
The device switches off.
➮ Replace the release panel.
The device switches on. The most recent settings (radio, cassette, CDchanger or AUX) are restored.
Switching on and off with button 3
➮ Press the button, 3, to s witch on.
➮ To switch off, hold the button, 3,
pressed for longer than two seconds.
The device switches off.
Switching on by means of cassette
insertion
If there is no cassette in the deck when
the device is switched off,
➮ press the button, 9.
The flip-release panel opens.
➮ Insert the cassette with the open
side to the right gently into the
drive until you can sense some resistance.
The cassette is automatically drawn into
the drive.
As the cassette is drawn in, it must neither be held back nor assisted.
➮ Close the panel with gentle pres-
sure until you feel it engage .
The device switches on. Cassette play
starts.
DEUTSCH
ENGLISH
FRANÇAIS
IT ALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
35
ADJUSTING THE VOLUME
Adjusting the Volume
The volume can be adjusted in steps
from 0 (off) up to 66 (maximum).
➮ To increase the volume, turn the
volume control, 2, to the right.
➮ To reduce the volume, turn the vol-
ume control, 2, to the left.
Adjusting the Switch-On Volume
➮ Press the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for “ON VOLUME” to appear in the displa y.
➮ Adjust the initial volume with the
or button, :.
If you set “0”, then whate ver volume was
in use before the device was switched
off will be reactivated.
Risk of serious injury! If the level
of switch-on volume is set to maximum, the volume when switching on
can be very high.
If the volume was set to maximum
before switching off, and the value
for the switch-on v olume is set to “0”,
the volume when switching on can
be very high. This can damage the
hearing!
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
Immediate Volume Reduction
(Mute)
Y ou can reduce the v olume immediately (mute) to a level that you have previously set.
➮ Press button 3 briefly.
“MUTE” appears in the displa y.
Adjust the muted volume.
The muting volume can be adjusted.
➮ Press the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for “MUTE
LEVEL” to appear in the display.
➮ Adjust the mute level with the or
button, :.
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
Telephone Audio/Navigation
Audio
If your car radio is connected to a mobile telephone or to a navigation system, then when the telephone is taken
“off hook”, or when the navigation system is giving speech output, the car radio is muted. The telephone conversation or the speech output are reproduced via the car radio speakers. This
requires the mobile telephone or navigation system to be connected to the
car radio as described in the fitting instructions.
Y our Blaupunkt dealer can tell you which
navigation systems can be used with
your car radio.
36
ADJUSTING THE VOLUME
If a traffic announcement is received
during a telephone call, or while the
navigation system is providing speech
output, the traffic announcement is not
reproduced until the call or the speech
output has finished.
If a call is received or if the navigation
system generates speech output during a traffic announcement, the announcement is reproduced. The telephone call or speech output can be
heard when the traffic announcement
has finished.
The volume level with which the telephone call or navigation output start can
be adjusted.
➮ Press the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for “TEL/
NAVI VOL” to appear in the display.
➮ Adjust the desired volume with the
or button, :.
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
Note:
● You can adjust the volume level of
telephone calls and of speech output as they are made with the volume control, 2.
Automatic Sound
This function adjusts the car radio volume automatically according to the driving speed. This requires your car radio
to be connected as described in the fitting instructions.
This automatic volume increase can be
adjusted to one of six levels (0-5).
➮ Press the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for “AUTO
SOUND” to appear in the displa y.
➮ Adjust the volume increase with the
or button, :.
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
Note:
● The best setting for the speed-de-
pendent volume increase depends
on the noise generated by your car.
Find the optimum value for your car
by experiment.
Adjusting the Volume of the
Confirmation Tone
With certain functions, if you hold a button pressed for longer than two seconds,
for instance in order to save a station
frequency to a station button, a confirmation tone, or beep, is generated. The
volume lev el of the beep can be adjusted.
➮ Press the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for “BEEP” to
appear in the display.
➮ Adjust the volume with the or
button, :. “0” means that the beep
is off, while “9” is the maximum
beep volume.
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
DEUTSCH
ENGLISH
FRANÇAIS
IT ALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
37
Loading...