Blaupunkt LUCCA 5.2 NORTH EUROPE User Manual
Mobile Navigation
TravelPilot Lucca 5.2
www.blaupunkt.com
Operating and installation instructions
Long version
Device Overview
1
2
3
4
5
6
7
8
:
;
9
<
=
>
?
2
1 VOLUME touch slider: Move your fi nger
along the touch slider to change the volume
(up to increase the volume, down to decrease
the volume).
2 INFO button: Repeats the last travel instruc-
tion.
3 On/Off switch:
Short press: Starts the device or switches it
to idle state.
Long press (longer than three seconds):
Switches the device off.
4 MENU button: This button calls up the main
menu.
5 Touchscreen: All entries and the control of
Lucca are carried out in a simple and intuitive
way by touching the buttons displayed on the
touchscreen.
6 ZOOM/SCROLL touch slider: During the
map display, you can zoom in and out. You
can scroll through lists with this touch slider.
7 SD card slot.
8 Socket for connecting the Lucca to the battery
charger or the charger cable for the cigarette
lighter.
9 Headphone jack.
: USB port for using a map reader for the SD
card.
; Connection for Connect Cradle.
< Reset button: Restarts the Lucca.
= Battery cover.
> GPS antenna input.
? TMC antenna input.
Device Overview
3
Contents
Lucca scope of delivery ........................7
Safety notes ........................................7
Use as directed ..................................7
Safety notes for navigation ..................7
Safety notes for handling the Lucca ......7
Initial startup of Lucca .........................8
Protective fi lm and covers .......................8
Setting the Language .............................8
Reset ...................................................8
Charging the battery ............................8
Installation in the Vehicle ....................9
Attaching the Support .........................9
Removing the Support ........................9
Attach the Connect Cradle ..................9
Installing Lucca in the Connect Cradle ...9
Removing the Lucca ...........................9
Switching on/off ................................10
Initial switch-on ...............................10
Switch-on .......................................10
Activating the idle state .....................10
Switch-off .......................................10
Controls ............................................10
Basic buttons ......................................10
Software keyboard ..............................10
Entering Blank Spaces ......................10
Entering numbers .............................10
Entering umlauts ..............................11
Deleting characters ..........................11
Lists ..................................................11
Performing Basic Settings ..................11
Setting the Time Zone .........................11
Entering the Home Address ..................12
Activating the PIN query .......................12
GPS Info .........................................12
Navigation ........................................13
General Notes about the Navigation .......13
Navigating to a destination address ........13
Entering a destination address ...........14
Navigating to a point of interest .............14
Selecting a point of interest ...............14
Selecting a point of interest nearby .....14
Selecting a point of interest at a
specifi c location ...............................15
Using the travel guide ...........................16
Selecting a travel destination .............16
Selecting a travel destination nearby ...16
Selecting a travel destination at a
specifi c location ...............................17
Copying a Destination from the Map .......17
Moving the map section ....................17
Copying a destination from the Map ....18
Copying the Destination from the
Favourites ..........................................18
Copying a Favourite for Destination
Guidance ........................................18
Additional functions .........................19
Copying one of the recent destinations ...19
Additional functions .........................19
Using home address as destination ........19
Destination guidance ...........................20
Changing routing options ..................20
Disturbed GPS reception ...................20
Quitting the destination guidance .......21
Reaching the place of destination .......21
Managing Destinations .........................21
Saving destinations ..........................21
Saving one of the Recent Destinations ..21
Renaming a destination .....................21
Deleting a destination .......................22
Delete all destinations .......................22
Route Planning with Stages ...................22
Entering route points ........................22
Adding additional route points ...........23
Saving and editing routes ..................23
Changing the Order ..........................23
4
Contents
Saving a route ..................................23
Loading a route ................................23
Deleting a Route Point .......................23
Deleting a Complete Route List ...........24
Calculating a route ............................24
Displaying the Route on the Map .........24
Simulation ..........................................24
Defi ning routing options .......................24
Map Display during Destination Guidance .. 25
Navigation Tools ...............................25
Route Information ............................26
Signpost information ........................26
Speed Limit .....................................26
Working with the Map ..........................26
Map Operation .................................26
Showing a Map ................................26
Touching the map .............................26
Buttons ..........................................27
Additional functions .........................28
Day/night mode ...............................28
Mute ..............................................28
Block road, unblocking ......................28
Inserting an Interim Destination ..........28
Next destination ...............................28
Settings ..........................................28
Route options ..................................28
Showing additional map information ...28
Route Information ............................29
Signpost information ........................29
Speed ............................................29
Additional Functions during Navigation ...30
Inserting an interim destination .............30
Approaching the next destination ..........30
Blocking route segments ......................30
Manual blocking ...............................30
Unblocking ......................................31
TMC function .....................................31
Connecting the TMC antenna ................31
Setting the TMC function ......................31
Showing traffi c jam reports ...................32
Confi guring Lucca .............................32
Settings in the main menu.....................32
Language ........................................32
Time...............................................33
Display ...........................................33
Factory settings ...............................33
Touchscreen ....................................33
Product information .........................33
Night mode .....................................34
Theft protection ...............................34
Button sound ...................................34
Audio / video ...................................34
Settings in the navigation menu .............34
Entering the Home Address ...............34
Map information ..............................35
Route information ............................35
Route planning .................................35
TMC ...............................................35
Select map ......................................36
Signpost information ........................36
Speed ............................................36
Auto mode ......................................36
Unit of measure ...............................37
Display ...........................................37
Volume ...........................................37
Voice output ....................................37
Data transfer .....................................38
Using road maps from the SD card .........38
Using media fi les from the SD card .........38
5
Contents
Media player .....................................39
Inserting the SD card ...........................39
Starting the media player ......................39
Playing music fi les ...............................39
Navigating through the music fi les .......39
Repeated play of music fi les (Repeat) ..39
Random play of music fi les (Shuffl e) ...39
Changing to the music browser...........39
Showing image fi les .............................39
Navigating through the image fi les ......40
Display image folders ........................40
Rotating image fi les ..........................40
Changing to the picture browser .........40
Confi guring the slide show .................40
Starting the slide show ......................40
Playing video fi les ................................40
Stopping playback ............................40
Connecting an external
audio-video source ..............................40
Ending the media playback ...................41
Removing the SD card ..........................41
Connect Cradle .................................42
Pin assignment D-sub Connect Cradle ....42
Accessories ........................................43
Technical data ...................................43
Disposal of old unit ............................44
Service .............................................44
Warranty ...........................................44
Frequently asked questions / FAQ .......45
Troubleshooting table ........................46
6
Scope of delivery | Safety notes
Lucca scope of delivery
The scope of delivery contains the following components:
Lucca
•
Suction cup holder
•
Charger cable for cigarette lighter
•
Battery charger for 110 V to 230 V
•
USB cable
•
Antenna for TMC reception
•
Operating instructions (short version)
•
DVD with road maps and operating instruc-
•
tions (long versions), reset program for a restore
Connect Cradle
•
Safety notes
For your personal benefi t, carefully read the following safety notes and warnings before operating your Lucca for the fi rst time.
Use as directed
The device is designed for mobile use in vehicles.
The device can also be used by pedestrians.
Special information about the navigation of trucks,
busses and campers, such as altitude and width
limitations or maximum permissible road load, is
not included in the navigation data!
Navigation off the roads (offroad) is only possible
to a limited extent with the Lucca.
Safety notes for navigation
Caution:
Do not operate the Lucca while driving to protect
yourself and others against accidents!
View the display only if you are in a safe travel situation!
The street routing and traffi c signs have priority
over the instructions of the navigation system.
Follow the instruction of the Lucca only if circumstances and traffi c regulations allow! Lucca will
bring you to your destination even if you have to
deviate from the planned route.
Notes:
Routes are best planned before starting
•
your trip. If you want to enter a new route
while on the road, please head for the next
parking or rest area!
If you did not understand the voice infor-
•
mation or if you are not sure what to do at
the next intersection, use the map or arrow
display for quick orientation.
Safety notes for handling the Lucca
Caution:
Protect the device against moisture since it is not
waterproof and not splashproof.
Notes:
Remove the plug to the power supply of
•
the Lucca if you are parking your vehicle
for more than three days. The GPS receiver
constantly uses electricity and could discharge the vehicle battery.
Do not unplug the connector by pulling on
•
the wire. The wire could be damaged!
Do not use strong detergents for cleaning
•
the device. Use only a moistened, lint-free
cloth.
7
Initial startup of Lucca | Charging the battery
Initial startup of Lucca
Protective fi lm and covers
Prior to the initial use, remove the protective fi lm
from the display. Before inserting an SD card in
the slot remove the dummy SD card. To protect
the contacts, you can re-insert the dummy SD
card after using the Lucca.
Setting the Language
If you are starting up the Lucca for the fi rst time,
you must set the language for the menus and the
voice output.
To switch on the Lucca, press the button
쏅
3.
In the main menu, touch Settings.
쏅
Touch Language.
쏅
A list with available languages is displayed.
쏅
To scroll in the language list, move your fi nger
along the touch slider 1.
쏅
Touch the preferred language. The language is
loaded and the main menu is displayed.
Reset
The Lucca can be restarted by using the Reset
button.
For this purpose, press the reset button <
쏅
on the underside of the Lucca.
Charging the battery
The built-in battery allows for operating the Lucca
via battery for up to fi ve hours. The exact usage
time is dependent upon the type of operation.
The charge indicator of the battery is located in
the top center of the screen. The number of dark
block segments on the battery symbol indicates
the charge state of the battery (0 to 3 segments).
The symbols have the following meaning:
: The device is supplied by an external
–
power source.
: The device is supplied by its internal
–
battery. The charge state of the battery is
suffi cient.
: The device is supplied by its internal
–
battery. The charge state of the battery is
low.
Note:
If the charge state of the battery is very low, a
warning message is displayed.
To charge the battery, attach the supplied bat-
쏅
tery charger or the charger cable for the cigarette lighter to the charging socket 8 an.
Note:
Use only original chargers for operating and
charging the battery.
The charging time is approx. 5 to 6 hours.
Note:
Do not discard any batteries in the
household trash; instead, return them to
the corresponding collection sites.
8
Installation in the Vehicle
Installation in the Vehicle
For temporary installation in a vehicle, the Lucca
features a suction cup holder with a suction cup to
attach it to the windshield.
Caution:
Install the Lucca so that it does not block your view
and does not distract from the traffi c.
Do not install the Lucca in the airbag deployment
area.
Ensure that the Lucca does not pose a threat to
passengers in the vehicle in case of emergency
braking.
Attaching the Support
The Lucca can be installed in the vehicle in a simple way using the supplied suction cup holder.
Locate a suitable place for installing the Lucca.
쏅
To ensure a perfect hold, the glass must be
free of dust and oil. If necessary, clean the
glass fi rst using a lens cleaning tissue.
Press the suction plate of the support against
쏅
the glass.
Push the lever on the suction support towards
쏅
the glass.
The holder can now be adjusted. The track
쏅
for mounting the Lucca must be aligned vertically.
Removing the Support
If you change vehicles, you can simply remove the
support.
Push the lever on the suction support away
쏅
from the glass.
Carefully loosen the suction plate at the edge
쏅
from the glass so that air can enter between
suction cup and glass.
Carefully pull the suction cup off of the glass.
쏅
Attach the Connect Cradle
The suction cup holder features a mount for the
Connect Cradle. The Connect Cradle expands the
functions of the Lucca. The chapter "Connect Cradle" provides information about connecting the
Connect Cradle to your car sound system.
쏅
Snap the Connect Cradle with the suction cup
holder into position.
Installing Lucca in the Connect Cradle
The Lucca features an opening on the
for mounting the Connect Cradle.
쏅
Detach the elastic cover on the underside of
the housing.
Place the Lucca on the mount of the Connect
쏅
Cradle and snap the Lucca to the rear and into
position.
Removing the Lucca
Press the lever of the Connect Cradle at the
쏅
rear side of the Lucca and pull the Lucca to
the front.
쏅
Remove the Lucca to the top and out of the
Connect Cradle.
To protect the contacts, you can apply the elastic
cover and dummy SD card again after using the
Lucca.
underside
9
Switching on/off | Controls
Switching on/off
Initial switch-on
During the initial switch-on of the Lucca, the software is loaded into the system. For this reason,
the switch-on process
The initial destination guidance also requires
some more time than usual.
Switch-on
To switch on the Lucca, press the button
쏅
3.
The device switches on. (If the device is in
the idle state, the previously active display is
shown again).
Activating the idle state
To activate the idle state, briefl y push the but-
쏅
3 below the display.
ton
The Lucca switches to the idle state.
Switch-off
To switch off the device, press and hold the
쏅
button
The Lucca is switched off.
Note:
A switch-off of the Lucca is only necessary if
you do not operate the device for an extended
period of time. Still, the Lucca requires a little bit of current even in the switch-off state.
Hence, it is possible that the battery must be
recharged after an extended period of time.
may last up to one minute.
3 for longer than three seconds.
Controls
Basic buttons
Touch the touch slider 6 up to scroll up in
•
the list by one page (5 elements).
•
Touch the touch slider
in the list by one page (5 elements).
•
To scroll in a list, move your fi nger along the
touch slider
Note:
If the list features more than fi ve elements,
the scroll bar indicates the current position
in the list.
•
try without selecting a list element.
•
next page in the menu.
•
More: Touch this button to obtain access to
additional functions. Depending on the menu
in which you are currently located, different
functions are offered.
6.
: Touch this button to return to the en-
: Touch this button to change to the
Software keyboard
If text entries are required, the touchscreen displays a software keyboard. You can perform all
the entries on the touchscreen by touching the
respective symbol with your fi nger. You can only
enter capital letters.
You do not have to enter any special characters or
umlauts when entering city or street names. The
Lucca completes these characters automatically.
6 down to scroll down
10
Entering Blank Spaces
쏅
Touch the
Entering numbers
쏅
Touch the
The numeric keypad is displayed.
쏅
Touch one of the number symbols to enter a
number in the text fi eld.
To change back to the character keyboard:
쏅
Touch the
button to enter a blank space.
button.
button.
Basic Settings
Entering umlauts
Touch the
쏅
The umlaut keyboard is displayed.
Touch one of the umlaut symbols to enter an
쏅
umlaut in the text fi eld.
As soon as you enter an umlaut, the character keyboard is displayed again.
Deleting characters
To delete a character, touch the button
쏅
button.
.
Lists
In many cases, you can display lists from which
you can select an entry.
This is the case, for example, if you do not enter
the complete name of a place during the entry. After every entry of a letter, the text fi eld shows the
fi rst entry that starts with the previously entered
characters.
To display a list with additional matching entries:
Touch the List button.
쏅
The list is displayed.
Touch the entry in the list to select it.
쏅
Touch the OK button.
쏅
The list element is selected.
The entry menu is displayed.
Performing Basic Settings
Before you work with the Lucca,
set the time zone of for your position so that
•
the correct arrival times are displayed during
the navigation, and
enter your home address to quickly navigate
•
home from any location.
Setting the Time Zone
In the main menu, touch the Settings button.
쏅
The Settings menu is displayed.
Touch Time.
쏅
The Time menu is displayed.
Touch Zone.
쏅
The Time zone menu is displayed.
Touch the time zone in the list that is valid for
쏅
your current position (GMT without daylight
savings time).
Note:
The selection is facilitated by the display of
the capitols in the respective time zone.
Touch the OK button.
쏅
To switch the daylight saving time on or off,
쏅
touch the Daylight savings time button.
The button displays ON or OFF.
Note:
Adjust the corresponding settings if the time
is changed at your position or if you drive into
a different time zone.
11
Basic Settings
Touch the OK button.
쏅
Touch the Format button to toggle between
쏅
12-hour and 24-hour display.
Touch the OK button.
쏅
The Settings menu is displayed.
Entering the Home Address
쏅
On the second page of the Navigation menu,
touch the Settings button.
The Settings menu is displayed.
쏅
Touch the Home address button.
The Home address menu is displayed.
쏅
Touch the Enter home address button.
The Destination entry menu is displayed.
쏅
Touch the Address button and enter your
home address. See "Entering a destination
address".
쏅
Touch the Set as home address button.
The address is copied into the Home address
menu.
쏅
Touch the OK button.
The Settings menu is displayed again.
Activating the PIN query
The PIN query allows you to lock out unauthorised
persons from using the Lucca.
쏅
In the main menu, touch the Settings button.
On the second page of the Settings menu,
쏅
touch the Anti Theft Protection button.
Touch the Confi gure theft protection but-
쏅
ton.
Follow the instructions and enter a self-se-
쏅
PIN.
lected
Touch the OK button.
쏅
The initial confi guration of the PIN is followed by a
request to enter a PUK. The PUK is used to unlock
the Lucca if you should forget the PIN.
쏅
Follow the instructions and enter a self-se-
PUK.
lected
To secure your PUK:
Register under http://puk.blaupunkt.com
쏅
and follow the instructions.
GPS Info
The GPS Info menu contains information about
your current position and your actual speed. In
addition, you can also save your current position.
쏅
In the main menu of the Lucca, touch the Navigation button.
The Navigation menu is displayed.
쏅
Touch the
The display shows the second page of the
Navigation menu.
button.
The Theft protection menu is displayed.
12
Touch the GPS Info button.
쏅
The GPS Status menu is displayed.
GMT: Greenwich Mean Time. London time
•
without daylight saving time.
•
Longitude/latitude: Current position. Entry of
the eastern longitude and northern latitude.
•
Altitude: Current altitude above sea level.
Satellites: Number of satellites received. The
•
navigation requires signals from at least three
satellites.
HDOP: Horizontal Dilution of Precision. Indi-
•
cates the quality of the positioning. In theory,
values from 0 to 50 are possible, whereby the
following applies: The lower the value, the
more precise the positioning (value 0 = no
deviation from the actual position). Values up
to 8 are acceptable for navigation.
•
Speed: Indicates the current speed of the vehicle.
•
Position: Indicates the address of the current
position (if possible).
Save current position: Touch this button to
•
save the current position to the favourites
(only possible if a street has been located).
•
Touch the
window.
button to close the GPS
Navigation
Navigation
General Notes about the Navigation
Caution:
Do not operate the Lucca while driving to protect
yourself and others against accidents!
View the display only if you are in a safe travel situation!
The street routing and traffi c signs have priority
over the instructions of the navigation system.
Follow the instruction of the Lucca only if circumstances and traffi c regulations allow! Lucca will
bring you to your destination even if you have to
deviate from the planned route.
Note:
To be able to extensively use the navigation of
the Lucca, perform the basic settings before
the fi rst navigation (see "Performing Basic
Settings"
Navigating to a destination address
쏅
In the main menu of the Lucca, touch the Navigation button.
).
The Navigation menu is displayed.
13
Navigation
Entering a destination address
Touch the Destination entry button to enter
쏅
a destination for the navigation.
The Destination entry menu is displayed.
Touch the Address button.
쏅
The Address menu is displayed.
Touch the City or Postal code button.
쏅
The software keyboard is displayed.
The software keyboard allows for entering the
names of cities or streets as well as postal codes.
More information can be found in the chapter
"Controls".
Type the name of the city to which you want
쏅
to navigate using the software keyboard by
touching the letter buttons in sequence. Optionally, you can also enter the postal code.
Touch the OK button.
쏅
The Address menu is displayed.
If you want to enter a street name:
Touch the Street button.
쏅
Enter the street name using the software key-
쏅
board.
If you want to enter a house number:
Touch the No button.
쏅
The software keyboard is automatically displayed as numeric keypad.
Enter the House number using the software
쏅
keyboard.
Touch the Start Navigation button.
쏅
The navigation starts.
The destination guidance is displayed.
Navigating to a point of interest
The points of interest or POIs include interest specifi c locations such as airports, railway stations,
and garages. These points of interest are stored in
the map material and can be used as a navigation
destination.
Selecting a point of interest
In the main menu of the Lucca, touch the
쏅
Navigation button.
The Navigation menu is displayed.
Touch the Point of interest button to select a
쏅
special destination for the navigation.
The Point of interest menu is displayed.
You can now select one of the following points
of interest:
Airport
•
Filling station
•
Railway station
•
Car dealer
•
Restaurant
•
Note:
Touch the More button to call up additional
points of interest, such as port, trade fair or
bank. The desired point of interest us selected
by touching it.
Touch one of the symbols to navigate to the
쏅
respective point of interest.
You can now select whether you want to navigate
to a point of interest in your vicinity or at a specifi c
location.
Selecting a point of interest nearby
If you want to navigate to a point of interest in your
vicinity:
Touch the ... nearby button.
쏅
Note:
This function is only available if a GPS signal
is received.
14
Navigation
First, select the maximum distance at which the
point of interest may be located:
Touch the Distance button.
쏅
A list of the distances is displayed from which
you can select the desired distance.
Touch the distance you want to select.
쏅
Touch the OK button.
쏅
The distance is selected.
You can optionally limit the point of interest even
further (e.g. a postal offi ce in a specifi c street or
the fi lling station of a particular brand).
Note:
A more detailed limitation is not available for
all points of interest.
Touch the Category button.
쏅
A list of the available categories is displayed.
Touch the category you want to select.
쏅
Touch the OK button.
쏅
The category is selected.
The point of interest closest to your location is
now shown on the Next button.
Touch the List
쏅
button.
A list of points of interest that corresponds to
your specifi cations is displayed.
Touch the point of interest to which you want
쏅
to navigate.
If you want to save the point of interest:
For further details read the section "Saving a
•
destination".
To start the navigation, touch the Start Navi-
쏅
gation button.
The navigation starts.
Selecting a point of interest at a specifi c
location
If you want to navigate to a point of interest at a
specifi c location:
Touch the ... in a city button.
쏅
First select a country:
Touch the Country button to select a coun-
쏅
try.
A list of the selectable countries is displayed
from which you can select the desired country.
Touch the country you want to select.
쏅
The country is selected.
Next, select a city:
Touch the City or Postal code button.
쏅
The software keyboard is displayed.
You can enter the city or the postal code via
the software keyboard.
You can optionally limit the point of interest even
further (e.g. a postal offi ce in a specifi c street or
the fi lling station of a particular brand).
Note:
A more detailed limitation is not available for
all points of interest.
Touch the Category button.
쏅
A list of the available categories is displayed.
Touch the category you want to select.
쏅
The category is selected.
Touch the List button.
쏅
The selectable points of interest of this category are listed.
Touch the Direct entry button if you want to
쏅
enter your own name for a point of interest.
- or Touch the point of interest to which you want
쏅
to navigate.
If you want to save the point of interest:
For further details read the section "Saving a
•
destination".
To start the navigation, touch the Start Navi-
쏅
gation button.
The navigation starts.
15
Loading...