Blackmagic Studio Fiber
Converter
Work with remote cameras up to 2 km away from your studio or outside |
$2,995 |
broadcast truck using SMPTE fiber. The Blackmagic Studio Fiber Converter |
|
converts SDI video, audio, and remote camera control connections into a single |
|
optical fiber cable, which connects to a Blackmagic Camera Fiber Converter |
|
attached to a remote camera. All video and data are transmitted using standard IP |
|
for extremely low latency broadcast quality video. You get 12G-SDI for an HD or Ultra HD camera feed and 3 independent HD return feeds, along with standard connections for camera control, PTZ, two dual channel talkback intercoms, tracker talkback, tally and a 5 inch LCD screen for monitoring camera and return feeds. The Blackmagic Studio Fiber Converter also provides power for your remote cameras and accessories.
1x SMPTE Hybrid Fiber Optic with Female SMPTE 304 connector.
3x 12G SDI Return feeds with Program, Camera Control, Tally, Genlock and Intercom on Return 1.
2x 12G SDI for Ultra HD up to 60p.
SDI Channels 15 & 16 for Production, Analogue in & out supported via 25-pin connector for Production and Engineering talkback support.
4x camera analogue audio outputs.
1x Optical I/O via 10 Gb-E (not currently active).
1x USB-C.
Blackmagic Studio Fiber Converter - Technical Specifications |
Page 1 / 4 |
720p50, 720p59.94, 720p60 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60 1080PsF23.98, 1080PsF24,
1080PsF25, 1080PsF29.97, 1080PsF30 1080i50, 1080i59.94, 1080i60
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p60
SMPTE 259M, SMPTE 292M, 296M, 372M, 424M Level B, 425M.
Television standard sample rate of 48Khz, 24 bit A/D conversion.
4:2:2
10-bit
REC 709, REC 2020.
SDI switches between HD, 3G-SDI, 6GSDI and 12G-SDI.
Camera Utility for firmware update.
Blackmagic Studio Fiber Converter - Technical Specifications |
Page 2 / 4 |