Black & Decker Prfm1500 Instruction Manual [ar]

www.blackanddecker.ae

PRFM1500

ENGLISH

Fig. A

12 15 1813 14

16 17

Fig. B

Fig. C

Fig. D

ENGLISH

Fig. E

Fig. F

Parts Identification

1 Motor Housing 2 Connector 3 Tool Storage Compartment 4 Power Button 5 Reverse Button 6 Tray 7 Feed Tube 8 Grinder Assembly 9 Locking Nut 10 Locking Screw 11 Indicator 12 Food Pusher 13 Kebbe Cone 14 Kebbe Shaper 15 Spanner 16 Sausage Attachment (Medium and Large) 17 Mincing Disc (Fine, Medium & Coarse) 18 Blade 19 Worm 20 Tool Storage Release button

ENGLISH

Intended use

Your Black & Decker Meat Mincer has been designed for grinding meat. With the attachments provided, it can also be used to make kebbe and sausages. This product is intended for household use only.

Safety instructions

• Warning! When using mains-powered

appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage.

Read all of this manual carefully before using the appliance.

• The intended use is described in this manual.

The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

• Retain this manual for future reference.

• Do not operate the appliance if you are

barefoot.

• Keep loose clothes, long hair & cord away

from moving parts.

• Guide the power supply cord neatly so it does

not hang over the edge of a worktop and cannot be caught accidentally or tripped over.

• Never pull the power supply cord to

disconnect the plug from the socket. Keep the power supply cord away from heat, oil and sharp edges.

• The power cord should be arranged such that

it will not drape over the edge of counters or table tops where it could be pulled by children or tripped over.

• Switch off and wait for the motor to stop

running before disconnecting the appliance from the power supply.

• Never detach any part or accessory while the

appliance is still connected to the power supply. Always disconnect the appliance from the power supply first.

Using your appliance

• Switch off and unplug the appliance before

changing accessories or approaching parts which move when in use.

• Make sure that the appliance is switched off

before connecting to or disconnecting from the power supply.

• Always take care when using the appliance

• Do not use the appliance outdoors.

• Do not operate the appliance if your hands

are wet.

• If the power supply cord is damaged during

use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before disconnecting from the power supply.

• Disconnect the appliance from the power

supply when not in use, before fitting or removing parts and before cleaning.

• Always disconnect the appliance from the

power supply if it is left unattended.

• Do not try to disassemble or repair this

appliance. Always return it to the manufacturer, its Service Agent or similarly qualified persons in order to avoid a hazard.

ENGLISH

Safety of others

• Do not allow children or any person

unfamiliar with these instructions to use the appliance.

• Do not allow children or animals to come

near the work area or to touch the appliance or power supply cord.

• Close supervision is necessary when the

appliance is used near children.

• This appliance is not intended for use by

persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been give supervision or instruction concerning use of the appliance by a person responsible for their safety

• Children must be supervised to make sure

that they do not play with the appliance.

Before first use

• Before using the appliance for the first time

ensure all packaging is removed.

• Clean all parts before use.

After use

• Switch off and remove the plug from the

socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.

• When not in use, the appliance should be

stored in a dry place. Children should not have access to stored appliances.

Inspection and repairs

• Before use, check the appliance for damaged

or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

• Do not use the appliance if any part is

damaged or defective.

• Have any damaged or defective parts

repaired or replaced by an authorised repair agent.

• Before use, check the power supply cord for

signs of damage, ageing and wear.

• Do not use the appliance if the power supply

cord or mains plug is damaged or defective.

• If the power-supply cord or mains plug is

damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

• Never attempt to remove or replace any parts

other than those specified in this manual.

Warning symbols

The following symbols are used in this manual: Do not immerse the appliance, cord set or plug

in liquids

Denotes risk of personal injury or

damage to the product in case of non-observance of the instructions in this manual.

ENGLISH

Denotes risk of electric shock.

Electrical safety

This tool is double insulated in accordance with EN 60335; therefore no earth wire is required.

Always check that the power supply corresponds to the voltage on the rating.

To avoid the risk of electric shock, do not immerse the cord, plug or motor unit in water or other liquid.

Mains plug replacement

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal of

the new plug.

• Connect the blue lead to the neutral terminal.

• If the product is class l (earthed), connect the

green / yellow lead to the earth terminal.

The following symbols are used on unit:

On / Off

Reverse

Assembly (Fig. B, C & D)

Warning! Make sure that the appliance is

switched off and unplugged.

• Loosen the locking screw (10) but do not

remove it from the connector (2).

• Pull the grinder (8) from the connector.

Unscrew the locking nut (9) and remove the mincing disc (17), blade (18) and worm (19).

• Check all parts are clean.

• After cleaning, re-assemble the grinder.

Insert the worm (19) into the grinder body and place the blade (18) on the square portion of the feed screw. Then place the required mincing disc (17) over the blade making sure the 2 tabs fit into the slots in the grinder body.

Warning! If your product is class ll double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality plugs

Any replacement fuse must be of the same rating as the original fuse supplied with the product.

• Fit the locking nut (9) onto the grinder

assembly and tighten by hand or spanner. Take care to avoid over-tightening.

• Insert the end of the grinder assembly into

the connector (2) and tighten the locking screw (10) by hand or with the spanner provided. Take care to avoid over-tightening.

• Fit the tray (6) into the grinder assembly. The

tab on the tray fits into the slot in the grinder.

+ 16 hidden pages