Black & Decker PIUSB2B Instruction Manual
148
durante el envío y manejo, alteraciones, reparaciones o
uso no autorizado, negligencia, abuso, y si no se siguen
instrucciones para el cuidado y mantenimiento del
producto.
Esta garantía le otorga al comprador usuario final,
derechos legales específicos y usted puede tener otros
derechos que varían de estado a estado o de provincia
a provincia. Este producto no está diseñado para uso
comercial.
Por favor completar la tarjeta de registro del producto
dentro de un plazo de 30 días a partir de la fecha de
compra y remitir a: Baccus Global LLC, 595 S. Federal
Highway, Suite 210, Boca Raton, FL 33432.
Baccus
Global LLC, número de teléfono gratuito: 1-877-571
2391.
ESPECIFICACIONES
Potencia de salida: 10 vatios
continuos
Entrada de CC: 12 voltios CC, 1A
Salida del puerto de carga USB : 5 voltios CC, 2A
Importados por Baccus Global LLC
595 S. Federal Highway, Suite 210
Boca Raton, FL 33432
1-877-571-2391
12 VOLT/10 WATT USB
PERSONAL
ELECTRONICS
CHARGER
INSTRUCTION MANUAL
Catalog Number: PIUSB2B
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Cat. # PIUSB2B May 2013
Copyright © 2013 Baccus Global Printed in China
Thank you for choosing Black & Decker!
Go to www.baccusglobal.com
to register your new product.
PLEASE READ BEfoRE REtuRning thiS
PRoDuct foR Any REASon:
If you have a question or experience a problem with your
Black & Decker purchase, go to http://www.baccusglobal.com
for instant answers 24 hours a day. If you can’t find the answer
or do not have access to the internet, call 1-877-571-2391
from 9 a.m. to 5 p.m. EST, Mon. – Fri. to speak with an agent.
Please have the catalog number available when you call.
PIUSB2B_ManualENFRSP_050813.indd 48-1 5/14/2013 4:17:06 PM
2 3
equipment could result in serious injury and property
damage. There are certain applications for which tools
and equipment are designed. Manufacturer strongly
recommends that this product NOT be modified and/
or used for any application other than for which it
was designed. Read and understand all warnings
and operating instructions before using any tool or
equipment.
imPoRtAnt SAfEty
inStRuctionS
•Avoid dangerous environments. Don’t use this unit
in damp or wet locations.
•
Keep children away. Keep away from children. This
is not a toy!
•
Store indoors. When not in use, this unit should be
stored indoors in a dry, and high or locked-up place –
out of reach of children.
•
Proper cooling is essential when operating this unit.
Do not place it near a vehicle’s heat vent or in direct
sunlight.
•
Use of accessories and attachments: The use of
any accessory or attachment not recommended by
manufacturer for use with this unit could be hazardous.
•
Check for damaged parts. Any part that is damaged
should be replaced by the manufacturer before further
use. Contact the manufacturer at 1-877-571-2391 for
more information.
GENERAL SAFETY WARNINGS AND
INSTRUCTIONS
READ ALL inStRuctionS
WARNING: Read all instructions before operating
this personal electronics charger. Failure to follow
all instructions listed below may result in electric
shock, fire and/or serious injury.
SAfEty guiDELinES /
DEfinitionS
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
CAUTION: Used without the safety alert symbol indicates
potentially hazardous situation which, if not avoided, may
result in property damage.
RISK OF UNSAFE OPERATION. When using tools or
equipment, basic safety precautions should always be
followed to reduce the risk of personal injury. Improper
operation, maintenance or modification of tools or
PIUSB2B_ManualENFRSP_050813.indd 3 5/14/2013 4:17:06 PM
4 5
causing the vehicle accessory outlet fuse to open.
Information on the vehicle accessory fuse ratings are
typically found in the vehicle operator’s manual.
•
Make sure that the 12 volt outlet is free of debris
and the Personal Electronics Charger fits tightly in
the outlet.
CAUTION: TO REDUCE THE RISK OF INJURY OR
PROPERTY DAMAGE:
•Do not attempt to connect or set up this unit or its
components while operating your vehicle. Not paying
attention to the road may result in a serious accident.
•Always use this unit where there is adequate
ventilation.
•Always disconnect this unit from any power source
when not in use.
•Make sure the nominal powering voltage is 12 volts DC
when using the Personal Electronics Charger.
•Do not use with positive ground electrical systems.*
*The majority of modern automobiles, RVs and
trucks are negative ground.
•Reverse polarity connection will result in a blown fuse
and may cause permanent damage to the unit and will
void warranty.
•DO NOT OPEN THIS UNIT — there are no userserviceable parts inside. Opening the unit will void
manufacturer’s warranty.
•Do not use this unit with medical devices. It is not
tested for medical applications.
•
Do not operate this unit near flammable liquids or in
gaseous or explosive atmospheres.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK:
•Do not make any electrical connections or
disconnections in areas designated as
ignition
protected. This includes DC cigarette lighter type plug
connection. This unit is NOT approved for ignition
protected areas.
•Never immerse this unit or its components in water or
any other liquid, or use when wet.
•Do not insert foreign objects into the unit’s outlets.
WARNING: TO REDUCE THE RISK OF FIRE:
•Do not operate near flammable materials, fumes or
gases.
•Do not expose to extreme heat or flames.
•If the vehicle accessory outlet fuse opens (blows) when
plugging in the Personal Electronics Charger, do not
use this device with this vehicle accessory outlet:
•Do not repeatedly replace the vehicle accessory outlet
fuse.
•Do not replace the vehicle accessory outlet fuse with
one of a higher amperage rating.
•Never attempt to patch the fuse with tin foil or wire.
•
Any of these actions may cause serious electrical
damage and/or a fire.
•This unit is rated to draw up to 2 amperes from a 12V
vehicle outlet. Ensure that the engine system in your
vehicle can supply sufficient energy to the unit without
PIUSB2B_ManualENFRSP_050813.indd 4-5 5/14/2013 4:17:06 PM
6 7
CONTROLS AND FUNCTIONS
12 VOLT DC
ACCESSORY
PLUG
POWER/FAULT
LED INDICATOR
USB CHARGING PORTS
HOW THIS CHARGER WORKS
Your USB charger is designed to convert 12 Vdc to 5
Vdc. It allows the 12 Vdc in an automobile to supply
5 Vdc power to operate equipment that is normally
supplied from a USB power source. The charging cable
specifically designed for the electronic device being
charged is required. May not work for all electronic
devices. This product is intended for consumer use only.
•Do not use this unit on a watercraft. It is not qualified
for marine applications.
•Check the unit periodically for wear and tear. Return
to manufacturer for replacement of worn or defective
parts immediately.
•Install and operate only as described in this Instruction
Manual.
•
Read And Understand This Instruction Manual
Before Using This Unit.
SAvE thESE inStRuctionS
INTRODUCTION
Congratulations on purchasing your new Black &
Decker USB Personal Electronics Charger. Read
this Instruction Manual and follow the instructions
carefully before using this unit.
PIUSB2B_ManualENFRSP_050813.indd 6-7 5/14/2013 4:17:06 PM
8 9
the power source, wait for a few seconds and then
re-insert the unit into the power source.
OPERATING INSTRUCTIONS
The tip of the plug is positive (+) and the side contact is
negative (–).
1. Connect the unit to a vehicle’s accessory outlet or
other 12 volt DC power source. Make sure there is
adequate space for proper ventilation of the charger.
2. Rotate the unit slightly to make sure there is good
contact.
3. The Power/Fault LED Indicator will light blue,
indicating a proper connection.
•
If the Power/Fault LED Indicator lights red, a
Fault condition exists. Refer to the Troubleshooting
Section of this Instruction Manual.
•
If the charger does not work, make sure the
ignition/accessory outlet is powering the accessory
outlet. Some vehicles require the ignition switch to
be turned on.
4. Plug the USB-powered device into one of the USB
Charging Ports and operate normally.
Notes:
This unit’s USB Charging Ports do not support data
communication. They only provide 5 volts DC/2A power (as
indicated) to an external USB-powered device.
Remember to disconnect the charger from any power source
when not in use.
CAUTION: TO REDUCE THE RISK OF PROPERTY
DAMAGE:
Mobile Phones
Some mobile phone leads do not allow charging from
a standard USB port. Check with the mobile phone
manufacturer before using the phone with this charger.
Rechargeable Devices
If there is any sign that your appliance is behaving
differently when plugged into this charger than it does
when connected to the usual power source, unplug
the appliance and seek advice from the appliance
manufacturer.
POWER SOURCE REQUIREMENTS
The power source must provide 12 VDC and must be
able to supply the necessary current to operate the load.
CAUTION: TO REDUCE THE RISK OF PROPERTY
DAMAGE:
•The charger must be connected only to batteries with
a nominal output voltage of 12 Volts. The appliance
will not operate from a 6 Volt battery and will sustain
permanent damage if connected to a 24 Volt battery.
•Always connect the charger to the 12 volt DC power
source before plugging any devices into the unit.
•Do not attach a USB hub to this unit to allow additional
items to be added.
To prevent damage, the unit will shut down if it is
overloaded. To restart the unit you must remove it from
PIUSB2B_ManualENFRSP_050813.indd 8-9 5/14/2013 4:17:07 PM
10 11
WELL-VENTILATED — Keep the area surrounding
the charger clear to ensure free air circulation around
the unit. Do not place items on or over the charger
during operation. The unit will shut down if the internal
temperature gets too hot. The charger will auto-reset
after it cools down.
SAFE — Do not use the charger near flammable
materials or in any locations that may accumulate
flammable fumes or gases. This is an electrical appliance
that can briefly spark when electrical connections are
made or broken.
CARE AND MAINTENANCE
Storage
1. Ideal storage temperature range is 0-40°C (32104°F).
2. Store and use the PIUSB2S in a cool, dry place with
adequate ventilation for all-around air circulation.
3. Avoid locations that are exposed to heating units,
radiators, direct sunlight, or excessive humidity or
dampness.
PROTECTIVE FEATURES
The charger monitors the following conditions:
Low Battery Voltage — This condition is not harmful
to the charger, but could damage the power source, so
the charger will automatically shut down when input
voltage drops below 11.0 ± 0.5 volts DC. The charger
will automatically reset when the voltage improves to
11.5V.
Overload/Short Circuit Protection — The charger will
automatically shut down when a short circuit occurs.
A reverse polarity or short circuit condition may cause
irreversible damage to the appliance.
IMPORTANT:
The Power/Fault LED Indicator will light red to indicate a
Fault condition before automatic shutdown occurs.
If unit shuts down, to restart it you must remove it
from the power source, wait for a few seconds and then
re-insert the unit into the power source.
OPERATING TIPS
The charger should only be operated in locations that are:
DRY — Do not allow water or other liquids to come into
contact with the charger.
COOL — Surrounding air temperature should ideally be
10-20°C (50-68°F). Keep the charger away from direct
sunlight, when possible.
PIUSB2B_ManualENFRSP_050813.indd 10-11 5/14/2013 4:17:07 PM
12 13
Common Power Output Problems
Possible Cause Recommendation
Battery voltage
below 11.0 volts
Recharge battery or check DC
power supply.
Equipment being
operated draws
too much power
Reduce load to maximum 10
watts. Although this unit has two
outlets, some phones and tablets
can draw 10 watts from a single
outlet. Connecting another device
to the second outlet in this case
would create an overload condition
and cause the charger to shut
down.
Charger in
thermal shutdown
condition
Allow charger to cool down.
Ensure there is adequate
ventilation around the load is no
more than 10 watts for continuous
operation.
ACCESSORIES
Recommended accessories for use with your tool are
available from the manufacturer. If you need assistance
regarding accessories, please contact the manufacturer
at 1-877-571-2391.
WARNING: The use of any accessory not
recommended for use with this appliance could be
hazardous.
TROUBLESHOOTING
Common Problems
Problem Explanation/Recommendation
Power/Fault LED
Indicator is not lit
•Check that all the DC
connections are connected
correctly.
•Check the tightness of the DC
connection.
Note: Make sure that your
accessory outlet is “live”. You
may need to turn the ignition
key to the accessory position.
Power/Fault LED
Indicator Lights Red
When the Power/Fault LED
Indicator turns from green
(indicating the unit is powered)
to red, a fault condition is
present and the unit will
automatically shut down. See
the Protective Features Section
of this Instruction Manual
and Common Power Output
Problems in the following
section.
PIUSB2B_ManualENFRSP_050813.indd 12-13 5/14/2013 4:17:07 PM
14 15
abuse; and failure to follow instructions for care and
maintenance for the product.
This warranty gives you, the original retail purchaser,
specific legal rights and you may have other rights which
vary from state to state or province to province. This
product is not intended for commercial use.
Please complete the Product Registration Card and
return within 30 days from purchase of the product to:
Baccus Global LLC, 595 S. Federal Highway, Suite 210,
Boca Raton, FL 33432.
Baccus Global LLC, toll-free
number: 1-877-571-2391.
SPECIFICATIONS
Output Power: 10 watts
continuous
DC Input: 12 Volts DC, 1A
USB Charging Port Output : 5 volts DC 2A
Imported by Baccus Global LLC
595 S. Federal Highway, Suite 210
Boca Raton, FL 33432
1-877-571-2391
SERVICE INFORMATION
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the manufacturer at
1-877-571-2391.
ONE-YEAR LIMITED WARRANTY
The manufacturer warrants this product against defects
in materials and workmanship for a period of ONE (1)
YEAR from the date of retail purchase by the original
end-user purchaser (“Warranty Period”).
If there is a defect and a valid claim is received within
the Warranty Period, the defective product can be
replaced or repaired in the following ways: (1) Return the
product to the manufacturer for repair or replacement
at manufacturer’s option. Proof of purchase may be
required by manufacturer. (2) Return the product to the
retailer where product was purchased for an exchange
(provided that the store is a participating retailer).
Returns to retailer should be made within the time period
of the retailer’s return policy for exchanges only (usually
30 to 90 days after the sale). Proof of purchase may be
required. Please check with the retailer for their specific
return policy regarding returns that are beyond the time
set for exchanges.
This warranty does not apply to accessories, bulbs,
fuses and batteries; defects resulting from normal wear
and tear, accidents; damages sustained during shipping;
alterations; unauthorized use or repair; neglect, misuse,
PIUSB2B_ManualENFRSP_050813.indd 14-15 5/14/2013 4:17:07 PM
Loading...