How it Works
BK Precision
Loading...
CP62
User Manual
19 pgs1.34 Mb0

BK Precision CP62 User Manual

1
Model: CP62
USER MANUAL
www. .com
information@itm.com1.800.561.8187
2
Safety Summary
The following safety precautions apply to both operating and maintenance personnel and must be observed during all phases of operation, service, and repair of this instrument. Before applying power, follow the installation instructions and become familiar with the operating instructions for this instrument.
If this device is damaged or something is missing, contact the place of purchase immediately.
This manual contains information and warnings that must be followed to ensure safe operation as well as maintain the meter in a safe condition.
GROUND THE INSTRUMENT
To minimize shock hazard, the instrument chassis and cabinet must be connected to an electrical ground. This instrument is grounded through the ground conductor of the supplied, three-conductor ac power cable. The power cable must be plugged into an approved three-conductor electrical outlet. Do not alter the ground connection. Without the protective ground connection, all accessible conductive parts (including control knobs) can render an electric shock. The power jack and mating plug of the power cable must meet IEC safety standards.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Do not operate the instrument in the presence of flammable gases or fumes. Operation of any electrical instrument in such an environment constitutes a definite safety hazard.
KEEP AWAY FROM LIVE CIRCUITS
Instrument covers must not be removed by operating personnel. Component replacement and internal adjustments must be made by qualified maintenance personnel. Disconnect the power cord before removing the instrument covers and replacing components. Under certain conditions, even with the power cable removed, dangerous voltages may exist. To avoid injuries, always disconnect power and discharge circuits before touching them.
DO NOT SERVICE OR ADJUST ALONE
Do not attempt any internal service or adjustment unless another person, capable of rendering first aid and resuscitation, is present.
DO NOT SUBSTITUTE PARTS OR MODIFY THE INSTRUMENT
Do not install substitute parts or perform any unauthorized modifications to this instrument. Return the instrument to B&K Precision for service and repair to ensure that safety features are maintained.
WARNINGS AND CAUTIONS
WARNING and CAUTION statements, such as the following examples, denote a hazard and
appear throughout this manual. Follow all instructions contained in these statements.
A WARNING statement calls attention to an operating procedure, practice, or condition, which, if not followed correctly, could result in injury or death to personnel.
A CAUTION statement calls attention to an operating procedure, practice, or condition, which, if not followed correctly, could result in damage to or destruction of part or all of the product.
WARNING:
Do not alter the ground connection. Without the protective ground connection, all accessible conductive parts (including control knobs) can render an electric shock. The power jack and mating plug of the power cable meet IEC safety standards.
WARNING:
To avoid electrical shock hazard, disconnect power cord before removing covers. Refer servicing to qualified personnel.
CAUTION:
Before connecting the line cord to the AC mains, check the rear panel AC line voltage indicator. Applying a line voltage other than the indicated voltage can destroy the AC line fuses. For continued fire protection, replace fuses only with those of the specified voltage and current ratings.
www. .com
information@itm.com1.800.561.8187
3
CAUTION:
This product uses components which can be damaged by electro-static discharge (ESD). To avoid damage, be sure to follow proper procedures for handling, storing and transporting parts and subassemblies which contain ESD-sensitive components.
Compliance Statements
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This product is subject to Directive 2002/96/EC of the European Parliament and the Council of the European Union on waste electrical and electronic equipment (WEEE) , and in jurisdictions adopting that Directive, is marked as being put on the market after August 13, 2005, and should not be disposed of as unsorted municipal waste. Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable requirements.
Safety Symbols
! Terms in This Manual. These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result in
injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
! Terms on the Product. These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read the marking.
WARNING indicates an injury hazard not immediately accessible as you read the marking.
CAUTION indicates a hazard to property including the product.
! Symbols on the Product. These symbols may appear on the product:
Attention refer to operation Instructions.
This instrument has double insulation.
www. .com
information@itm.com1.800.561.8187
4
CE Declaration of Conformity
The model CP62 meets the requirements of 2006/95/EC Low Voltage Directive and 2004/108/EC Electromagnetic Compatibility Directive with the following standards.
Low Voltage Directive
- EN61010
Safety requirements for electrical equipment for measurement, control, and laboratory use.
EMC Directive
- EN55011 For radiated and conducted emissions.
- EN55082 Electrical discharge immunity
www. .com
information@itm.com1.800.561.8187
5
1! INTRODUCTION ................................................................. 6!
1.1 Introduction .............................................................................................. 6!
1.2 Description ............................................................................................... 6!
1.3 Specifications ........................................................................................... 6!
Table 1.3.0 Electrical Characteristics ................................................................. 6!
Table 1.3.1 Voltage and current ratings ............................................................. 6!
Table 1.3.2 Physical Characteristics .................................................................. 7!
Table 1.3.3 Environmental Characteristics ........................................................ 7!
Table 1.3.4 Power Requirements ..................................................................... 7!
Table 1.3.5 Certifications and compliances ....................................................... 9!
2! INSTALLATION ................................................................ 11!
2.1 Introduction ............................................................................................ 11!
2.2 Package Contents .................................................................................. 11!
2.4 Signal Connections ................................................................................ 11!
3! OPERATING INSTRUCTIONS ......................................... 12!
3.1 General Description ............................................................................... 12!
3.2 Controls and Indicators .......................................................................... 13!
3.3 Connectors ............................................................................................. 13!
3.4 Oscilloscope Measurements .................................................................. 14!
3.4.2 Multimeter Measurements ...................................................................... 15!
3.4.3 Increase Sensitivity ................................................................................ 15!
4! MAINTENANCE ................................................................ 16!
4.1 Battery and AC Power Adapter Operation: ........................................... 16!
4.2 Battery Installation: ................................................................................ 16!
4.3 Cleaning: ............................................................................................... 17
www. .com
information@itm.com1.800.561.8187
CP62 – Operating Manual
6
1 Introduction
1.1 Introduction
This manual contains information required to operate the B&K Precision model CP62 Current Probe. This section covers the instrument’s general description, specifications and characteristics.
1.2 Description
The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.
1.3 Specifications
Table 1.3.0 Electrical Characteristics
Current Ranges
10/100 mV/A
DC Accuracy, typical
±3% ±50 mA at 100 mV/A (50 mA to 10 A peak range)
±4% ±50 mA at 10 mV/A (500 mA to 40 A peak range)
±15% max at 100 mV/A (40 A peak to 100 A peak range)
Table 1.3.1 Voltage and current ratings
Rating
Maximum working current (A)
Maximum Working voltage (V)
Maximum floating voltage (V)
Range 10 mV/A
Range 100 mV/A
DC
100 *
10
600
600
DC + peak AC
100 *
10
600
600
AC peak
100
10
600
600
AC peak-peak
200
20
1200
-
RMS CAT III
70.7
7.07
300
300
RMS CAT II
70.7
7.07
600
600
RMS CAT I
70.7
7.07
600
600
*See Figure 2 for frequency derating.
www. .com
information@itm.com1.800.561.8187
Loading...
+ 13 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use