IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR BISSELL PET STAIN ERASER
CORDLESS HAND-HELD DEEP CLEANER. Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury. When using an electrical appliance, basic precautions should be observed, including the following:
» Do not pick up anything that is burning or smoking,
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY:
» Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts of the
appliance and its accessories.
» Use only the type and amount of liquids specified
under the Operations section of this guide.
» Unplug charger from outlet when not in use and
before servicing.
» Always connect to a proper electrical socket.
» Do not modify plug.
» Do not expose to rain. Store indoors.
» Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
» Use only as described in the user guide.
» Use only manufacturer’s recommended
attachments.
» Do not use with damaged charger, cord or plug.
» Do not immerse in water or liquid.
» If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water; do not attempt to operate it and have it
repaired at an authorized service center.
» Do not pull or carry charger by the cord, use
cord as a handle, close a door on cord, or pull
cord around sharp edges or corners. Do not run
appliance over cord.
» Keep charger away from heated surfaces.
» Do not unplug charger by pulling on cord.
» To unplug, grasp the plug, not the cord.
» Do not handle charger, including charger plug and
charger terminal with wet hands.
» Do not put any object into openings.
» Do not use with any opening blocked; keep free
of dust, lint, hair, and anything that may reduce air
flow.
» Use extra care when cleaning on stairs.
» Turn off all controls before plugging or unplugging
appliance.
» Do not use to pick up flammable or combustible
liquids, such as gasolene, or use in areas where they
may be present.
» Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.)
such as cigarettes, matches, or hot ashes.
» Do not use appliance in an enclosed space filled
with vapors given off by oil base paint, some
mothproofing substances, flammable dust, or other
explosive or toxic vapors.
» Do not pick up hard or sharp objects such as glass,
nails, screws, coins, etc.
» Do not use a flammable or combustible liquid.
» Prevent unintentional starting. Ensure the switch is
in the off-position before picking up or carrying the
appliance. Carrying the appliance with your finger
on the switch or energizing appliance that have the
switch on invites accidents.
» Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
» Do not use appliance that is damaged or modified.
Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or
risk of injury.
» Do not expose appliance to fire or excessive
temperature. Exposure to fire or temperature above
130°C/265°F may cause explosion.
» Follow all charging instructions and do not charge
the appliance outside of the temperature range
specified in the instructions. Charging improperly or
at temperatures outside of the specified range may
damage the battery and increase the risk of fire.
» Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
» Do not modify or attempt to repair the appliance
except as indicated in the instructions for use and
care.
» Keep the temperature range of between 40-104°F
when charging battery, storing unit or during use.
» Use only with charger SIL, Model SSA-100060US.
» Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
This model is for household use only.
www.BISSELL.com
2
Thanks for buying a BISSELL portable deep cleaner!
We love to clean and we’re excited to share one of our innovative products
with you. We want to make sure your portable deep cleaner works as well
in two years as it does today, so this guide has tips on using (pages 5-9),
maintaining (pages 10-13), and if there is a problem, troubleshooting (page 14).
In just a few simple assembly steps, you’ll be ready to spot clean. Flip to page
5 and let’s get started!
What’s In The Box?
Pet Stain Eraser
Charger
Plug/Cord
NOTE: Standard accessories may vary by model. To identify what should be included with
your purchase, please refer to the ‘carton contents’ list located on the side of the carton.
Round Bristle Brush
(select models)
Safety Instructions...........2
Product View................4
Cleaning Formula............4
Operations ................5-9
Maintenance & Care .....10-13
Window Cleaning Tool
(select models)
Straight Bristle Brush
(select models)
Troubleshooting ............14
Warranty ...................15
Service .....................15
Product Registration........16
Consumer Care.............16
www.BISSELL.com
3
Charging the Battery
1
2
4
Plug the adapter into a suitable wall
outlet. The battery status indicator lights
will illuminate when charging.
For maximum run time, charge the unit
4 hours prior to use. Refer to the chart
below for understanding the charging
status.
Before charging, make sure unit is off by
ensuring the battery status indicator lights
are not illuminated. Insert the charging
adapter plug into the charging port on
the handle near the base of the unit.
NOTE: There is a door covering the
charging port that will automatically
slide out of the way when the charging
adapter is inserted.
IMPORTANT: Before storing unit, ensure dirty water tank is empty. Unit should
not be left on its side with water in the dirty water tank.
NOTE: On first use, make sure your unit
is fully charged before using it. To check
the battery status, turn the machine ON
by pressing the power button on the
handle. Battery is fully charged when
all three of the blue status lights are
illuminated. See chart below.
Charging Light Display Status
BATTERY STATUS LIGHT STATUS
100%
99% to 66%
65% to 33%
32% to 1%
0%
NOTE: Keep the temperature range of between 40-104°F when charging
battery, storing unit or during use.
NOTE: Use only with charger SIL, Model SSA-100060US..
www.BISSELL.com
5
Filling the Solution Tank
NOTE: No water is needed when using BISSELL Portable Deep Cleaning Formula.
1
Pull the tank away at an angle to
remove it from the unit.
3
Add formula to the
indicated fill line on
the solution tank.
5
2
Twist and remove the tank cap.
4
If desired, add 1/2 ounce of BISSELL BOOST
Formula to 2X Pet Stain & Odor formula.
6
click
Twist to replace the cap on the tank.
7
To ensure the tank if fully seated, make
sure there are no gaps in the seams
between the tank and unit.
www.BISSELL.com
6
Return the tank to the unit making sure
it is fully seated.
Pre-Treating
IMPORTANT: Check the manufacturer’s tag before cleaning upholstery. “W” or
“WS” on the tag means you can use your Pet Stain Eraser. If tag is coded with
an “S” (with diagonal strike-through), or says “Dry Clean Only,” do not proceed.
If manufacturer’s tag is missing or not coded, check with your furniture dealer.
1
Check the
manufacturer’s tag
before cleaning
upholstery. “W” or
“WS” on the tag
means you can use
your Pet Stain Eraser.
3
Battery status lights will illuminate to
show how much battery remains.
5
2
Push power button to turn the unit ON.
4
To pretreat stained or soiled areas, hold the
unit above soiled surface and press spray
trigger until the entire area is wet.
5
Let cleaning solution set for 5
minutes before cleaning.
www.BISSELL.com
7
Spot Cleaning Carpet & Upholstery
WARNING
Keep spray away from face. Failure to do so may result in personal injury.
NOTE: If unit stops spraying, push power button to turn unit o and check
cleaning solution level. Refill if needed. Never run dry.
NOTE: When cleaning on upholstery, be sure to use the unit vertically upward.
1
Push power button to turn the unit ON.
Battery status lights will illuminate to
show how much battery remains.
3
For stubborn spots, use brush to gently
scrub soiled area while continuing to
spray cleaning solution.
5
Repeat steps 2 and 4 until no more dirt or cleaning solution can be removed.
Do not overwet.
2
Hold the unit above soiled surface
and press the trigger to spray
cleaning solution.
4
Press front of unit firmly against surface
and pull toward you to remove cleaning
solution. Be sure to release the trigger
for optimal suction.
www.BISSELL.com
8
Window Cleaning (select models)
1
Remove scrubbing brush
by pushing tab up and
pulling gently.
4
METHOD 1
Rinse tank to remove any previous
contents. Fill with window cleaner
(not included).
4
METHOD 2
Spray window
cleaning
solution
directly on the
window.
2
Attach window cleaning
tool by first securing on
the clear nozzle.
5
5
3
Then rotate window
cleaning tool until it
clicks into place.
Hold machine in
vertical position in
front of window and
press spray trigger to
spray window cleaning
solution onto window.
Release spray trigger
and use sponge on the
tool to gently scrub.
Go to step 6.
Release spray trigger.
Use the sponge on the
tool to gently scrub.
6
Spray trigger still released, tilt cleaner
down to engage the squeegee. Clean
with complete vertical strokes and work
across entire window.
7
When cleaning, ensure squeegee is
against window for optimal suction and
hold machine in upright position.
NOTE: This machine is safe to use with any o-the-shelf ammonia-based
window cleaning solutions. Do not attempt to use any other types of cleaning
fluids, such as lemon-based, pine-based, or solvent based cleaning fluids, as it
may damage your machine and void your guarantee.
www.BISSELL.com
9
Empty Dirty Water Tank
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from
charger before performing maintenance or troubleshooting.
1
Ensure the unit is OFF and set upright
on a flat surface. Simply push up on the
release button located on the top of the
tank to remove.
3
Rinse out the dirty tank with clean water
after emptying.
2
Carefully remove the dirty water tank from
the unit and carry to a sink. To prevent
spills, hold tank vertically after removing.
To empty, pull tab at the end of the tank
and empty to remove the dirty water.
4
click
Close the tank plug
and return tank to
the unit. Ensure
the tank is secure
before use.
NOTICE: To reduce the risk of a leaking condition, do not store where freezing
may occur. Damage to internal components may result.
www.BISSELL.com
10