Biostar A770 A2G+ Owner's Manual

A770 A2G+ Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start ................................................................................ 1

1.2 Package Checklist............................................................................. 1

1.3 Motherboard Features...................................................................... 2

1.4 Rear Panel Connectors ..................................................................... 3

1.5 Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 5

2.1 Installing Central Processing Unit (CPU)....................................... 5

2.2 FAN Headers...................................................................................... 7

2.3 Installing System Memory ................................................................ 8

2.4 Connectors and Slots....................................................................... 10

Chapter 3: Headers & Jumpers Setup .................. 12

3.1 How to Setup Jumpers .................................................................... 12

3.2 Detail Settings.................................................................................. 12

Chapter 4: RAID Functions .................................. 19

4.1 Operating System............................................................................ 19

4.2 Raid Arrays...................................................................................... 19

4.3 How RAID Works............................................................................. 19

Chapter 5: Useful Help ........................................ 22

5.1 Driver Installation Note.................................................................. 22

5.2 Software............................................................................................ 23

5.3 Extra Information............................................................................ 27

5.4 AMI BIOS Beep Code....................................................................... 29

5.5 Troubleshooting............................................................................... 30

Appendix: SPEC In Other Languages ................... 32

German.................................................................................................................. 32

French .................................................................................................................... 34

Italian ..................................................................................................................... 36

Spanish ................................................................................................................... 38

Portuguese ............................................................................................................ 40

Polish...................................................................................................................... 42

Russian ................................................................................................................... 44

Arabic..................................................................................................................... 46

Japane se ................................................................................................................ 48

CHAPTER 1: INTRODUCTION

A770 A2G+

1.1 B

EFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with

sufficient lighting.

 Always disconnect the computer from power outlet

before operation.

 Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.

 Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short
circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

1.2 PACKAGE CHECKLIST

HDD Cable X 1
Serial ATA Cable X 1
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
Serial ATA Power Cable X 1 (optional)
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)

Note: The package contents may be differed by area or your motherboard version.

1

Motherboard Manual

/

1.3 MOTHERBOARD FEATURES

Socket AM2+

CPU

FSB

Chipset

Super I/O

Main

Memory

IDE Int eg r at ed IDE Co nt ro ller

SATA II Integrated Serial ATA Controller

LAN Realtek RTL 8111C

Sound ALC662

Slots

On Board

Connector

AMD Athlon 64 / Athlon 64 FX

/ Sempron / Ph eno mX3 / Pheno mX4

process ors (Max imu m Watt: 95W)

Support HyperTransport 3.0

Supports up to 5.2 GT/s Bandwidth

Northbridge: AMD 770

Southbridge: AMD SB700

ITE 8718

Prov ides the most com mon ly us ed legac y

Super I/O functionality

DDR2 DIMM Slots x 4

Max Memory Capacity 16GB

Each DIMM supports 256MB/512MB/

1GB/2GB/4GB DDR2

PCI Express Gen2 x16 slot x1

PCI Express Gen2 x1 slot x2

PCI slot x3

Floppy connector x1 Each connector supports 2 Floppy drives

IDE Connector x1 Each connector supports 2 IDE device

SATA Connector x6 Each connector supports 1 SATA devices

Front Panel Connector x1 Supports front panel facilities

Athlon 64 x2

SPEC

AMD 64 Architecture enables 32 and 64 b it

computing

Supports Hyper Transport 3.0 and PowerNow

Low Pin Count Interface

En viro nm ent Cont rol in it iatives

H/W Mon ito r

ITE's "S mart Guard ian " funct ion

Dual Cha nnel Mode DDR2 me mory modu le

Supports DDR2 533 / 667 / 800

Supports DDR2 1066 (by AM2+ CPU)

Register ed D IMM and ECC D IMM is not supported

Multi-word DMA, and Ultra DMA 33/66/100/133

mod es

Data transfer rates up to 3 Gb/s

SATA Vers ion 2 .5 spe cif icat io n co mp liant

10 / 100 /1000 Mb/s auto negotiation

Half / Full duplex capability

5.1 channels audio out

High Definition Audio

Supports PCI-E Gen2 x16 expans ion cards

Supports PCI-E Gen2 x1 expans ion cards

Supports PCI expansion cards

2

SPEC

Front Audio Connector x1 Supports front panel audio function

CD-in Connector x1 Supports CD audio-in function

CPU Fan header x1 CPU Fan power supply (with Smart Fan function)

System Fan h eader x1 Syst em Fan Po wer supply

CMOS clear header x1 Restore CMOS data to factory default

USB connector x2 Each connector supports 2 front panel USB port s

Power Connector (24pin) x1 Connects to Power supp ly

Power Connector (4pin) x1 Connects to Power supply

Printer Port Connector x1 Each connector supports 1 Printer port

Serial port Connector x1 Connects to RS-232 Port

PS/2 Keyboard x1

Back Panel

I/O

Board Size 205 mm(W) x 305 mm(L) ATX

Special

Features

OS Support Windows XP / VISTA

PS/2 Mouse x1

LAN port x1

USB Port x6

Audio Jack x3

RAID 0 / 1 / 1+0 support

Connects to PS/2 Keyboard

Connects to PS/2 Mouse

Connect t o RJ-45 ethe rnet cab le

Connect to USB devices

Provide Audio-In/Out and microphone connection

Biostar Reserves the right to add or remove support

for any OS With or without notice.

A770 A2G+

1.4 REAR PANEL CONNECTORS

PS/2
Mouse

PS/ 2
Keyboard

USBX2

USBX2

LAN

USBX2

Line In/
Surround

Line Out

Mic In 1/
Bass/ Center

3

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

JKBV1

JKBMS

JUSB2

JUSB1

JAUDIO

JATXPWR2

JUSBLAN

JCDIN

LAN

Supe r I/O

JATXPW R24

PCIE_X1 _1

PCIE_ X1_2

PCIE_X 16

PCI1

AMD

770

So cket A M2

CPUFAN

DIMMA1

AMD

SB700

DIMMB1

DIMMB2

DIMMA2

BAT

JCMOS

SATA1 SATA3 SATA5

IDE

BIO S

SYSF AN

4

Note: represents the 1■

Co de c

JAUDI OF

JCOM1

JPRNT

PCI2

PCI3

st

pin.

JUSB 3 JUSB4

FDD

JUSBV1

SATA2 SATA 4 SATA6

JPANEL

CHAPTER 2: HARDWARE INSTALLATION

A770 A2G+

2.1 I

NSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Remove the socket protection cap.

Step 2: Pull the lever toward direction A from the socket and then raise the

lever up to a 90-degree angle.

Step 3: Look for the white triangle on socket, and the gold triangle on

CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.

5

Motherboard Manual

Step 4: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to the CPUFAN. This completes the installation.

Note: Please update the BIOS to the latest version while using AM2+ CPUs. Due to the latest CPU

transition, you may encounter the situation that the new system failed to boot while using new
AM2+ CPUs. In this case, please install one standard AM2 CPU to boot your system, and
update the latest BIOS from our website for AM2+ CPUs support.

6

A770 A2G+

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPUFAN: CPU Fan Header

14

SYSFAN: System Fan Headers

3

1

Pin

Assignment

1 Ground
2 +12V
3

FAN RPM r at e
sense

4 Smart Fan

Control (By Fan)

Pin Assignment

1 Ground
2 +12V
3

FAN RPM r at e
sense

Note:

The CPUFAN and SYSFAN support 4-pin and 3-pin head connector. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.

7

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. DDR2 Modules

DIMMA1

DIMMB1

DIMMA2

DIMMB2

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

8

A770 A2G+

B. Memory Capacity

DIMM Socket

Location

DIMMA1 256MB/512MB/1GB/2GB/4GB

DIMMB1 256MB/512MB/1GB/2GB/4GB

DIMMA2 256MB/512MB/1GB/2GB/4GB

DIMMB2 256MB/512MB/1GB/2GB/4GB

DDR2 Module

Total Memory Size

Max is 16GB.

C. Dual Channel Memory installation

To trigger the Dual Channel function of the motherboard, the memory module
must meet the following requirements:

Install memory module of the same density in pairs, shown in the following
table.

Dual Channel Status

Enabled O O X X

Enabled X X O O

Enabled O O O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or
x16)

DIMMA1

DIMMB1 DIMMA2 DIMMB2

9

Motherboard Manual

2.4 CONNECTORS AND SLOTS

FDD: Floppy Disk Connector

The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cables.

234

133

IDE: Hard Disk Connector

The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode
0~4, Bus Master, Multi-word DMA, and Ultra DMA 33/66/100/133 functionality.

The IDE connector can connect a master and a slave drive, so you can connect
up to two hard disk drives.

40

39

2

1

10

A770 A2G+

PCIE_X16: PCI-Express Gen2 x16 Slot

- PCI-Express 2.0 compliant.

- Maximum theoretical realized bandwidth of 8GB/s simultaneously per

direction, for an aggregate of 16GB/s totally.

PCIE_X1_1/PCIE_X1_2: PCI-Express Gen2 x1 Slots

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.

- PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.

- 2X bandwidth over the PCI-Express 1.0 architecture.

PCIE_X1_1

PCIE_X16

PCIE_X1_2

PCI1~PCI3: Peripheral Component Interconnect Slots

This motherboard is equipped with 3 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

PCI3

11

Motherboard Manual

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 H

OW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

JPANEL: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

P

916
1

S

P

D

E

W

L

_

R

+

+

+

K

L

H

f

f

O

/

n

O

-

8

-

T

S

R

E

D

12

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
2 N/A 10 N/A
3 N/ A 11 N/ A N/A
4 Speaker
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)
7 Ground 15 Power button
8 Reset control

Speaker
Connector

Hard drive
LED

Reset button

12 Power LED (+)

14 Power LED (-)

16 Ground

N/A

Power LED

Power-on button

A770 A2G+

3

4

JATXPWR24: AT X Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX
power supply.

13

24

Pin Assignment Pin Assignment

1

12

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Gro und 3 Gro und
16 PS_ON 4 +5V
17 Gro und 5 Gro und
18 Ground 6 +5V
19 Gro und 7 Gro und
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

JATXPWR2: AT X Power Source Connector

By connecting this connector, it will provide +12V to CPU power circuit.

Pin

Assignment

12

1 +12V
2 +12V
3 Ground
4

Ground

13

Motherboard Manual

JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

JUSB3 JUSB4

2

10

9

1

JAUDIOF: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.

2

10

Assignment

Pin

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground
8 Ground
9 Key

10 NC

Pin Assignment

1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense
8 Key
9 Left line in

10 Jack Sense

14

1

9

A770 A2G+

JCDIN: CD-ROM Audio-in Connector

This connector allows user to connect the audio source from the variaty devices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.

Assignment

Pin

14

1 Left Channel Input
2 Ground
3 Ground
4 Right Channel Input

JCMOS: Clear CMOS Header

By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting
and the CMOS data, please carefully follow the procedures to avoid damaging
the motherboard.

3

1

Pin 1-2 Close:

Normal Operation (default).

3

1

3

1

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset your desired password or clear the CMOS data.

15

Motherboard Manual

JPRNT: Printer Port Connector

This header allows you to connector printer on the PC.

2

1

25

Pin Assignment Pin Assignment

1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy

9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key

16

SATA1~SATA6: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 6 channels SATA interface,
it satisfies the SATA 2.5 spec and with transfer rate of 3.0Gb/s.

SATA1 SATA3 SATA5
SATA2 SATA4 SATA6

JCOM1: Serial port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

A770 A2G+

Assignment

Pin

1 Ground
2 TX+
3 TX­4 Ground

1

4

7

10

2

5 RX­6 RX+
7 Ground

Pin Assignment

1 Carrier detect
2 Received data
3 Transmitted data
4

Data terminal ready
5 Signal ground
6 Data set ready
7 Request to send
8 Clear to send
9 Ring indicator

10 Key

1

9

17

Motherboard Manual

JKBV1: Power Source Header for PS/2 Keyboard and Mouse

3

1

3

1

Pin 1-2 Close

+5V for PS/2 keyboard and
mouse.

3

1

Pin 2-3 close

+5V STB for PS/2 keyboard and
mouse.

JUSBV1: Power Source Headers for USB Ports

Pin 1-2 Close:

JUSBV1: +5V for USB ports at front panel (JUSB3/JUSB4).

Pin 2-3 Close:

JUSBV1: +5V STB for USB ports at front panel (JUSB3/JUSB4).

18

13

13

Pin 1-2 close

13

Pin 2-3 close

CHAPTER 4: RAID FUNCTIONS

A770 A2G+

4.1 O

Supports Windows XP Home/Professional Edition, and Windows Vista

PERATING SYSTEM

4.2 RAID ARRAYS

RAID supports the following types of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for

many applications.

RAID 1: RAID 1 defines techniques for mirroring data.

RAID 1+0: RAID 1+0 combines the techniques used in R AID 0 and RAID 1.

4.3 HOW RAID WORKS

RAID 0:

The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a lar ge f ile in to smaller blocks an d p erforms disk r ea ds and writes acr os s multip le
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

 Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the

platform.

 Uses: Intended for non-critical data requiring high data throughput, or any

environment that does not require fault tolerance.

 Benefits: provides increased data throughput, especially for large files. No

capacity loss penalty for parity.

 Drawbacks: Does not deliver any fault tolerance. If any drive in the array

fails, all data is lost.

 Fault Tolerance: No.

Block 1
Blo ck 3
Blo ck 5

Block 2
Blo ck 4
Blo ck 6

19

Motherboard Manual

RAID 1:

Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.

RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliab le
media.

Features and Benefits

 Drives: Minimum 2, and maximum is 2.
 Uses: RAID 1 is ideal for small databases or any other application that

requires fault tolerance and minimal capacity.

 Benefits: Provides 100% data redundancy. Should one drive fail, the

controller switches to the other drive.

 Drawbacks: Requires 2 drives for the storage space of one drive.

Performance is impaired during drive rebuilds.

 Fault Tolerance: Yes.

20

Block 1
Block 2
Block 3

Block 1
Block 2
Block 3

A770 A2G+

RAID 1+0:

RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0
solution for improved resiliency, performance and rebuild performance.

Features and Benefits

 Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
 Benefits: Optimizes for both fault tolerance and performance, allowing for

automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.

 Drawbacks: Requires twice the available disk space for data redundancy,

the same as RAID level 1.

 Fault Tolerance: Yes.

Block 1
Block 3
Block 5

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

Block 2
Block 4
Block 6

21

Motherboard Manual

CHAPTER 5: USEFUL HELP

5.1 D

RIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader so ftware from
http://www.adobe.com/products/acrobat/readstep2.html

22

A770 A2G+

e

5.2 SOFTWARE

Installing Software

1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.

2. Select Software Installation, and then click on the respective software
title.

3. Follow the on-screen instructions to complete the installation.

Launching Software

After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.

Before you use this uti lity, please set Outlook E xpress as your default e- mail c lient app licatio n progra m.

re pr esen ts i mpor ta nt

*

information that you
must provide. Without
this inf ormation, you may
not be able to send out
the mail.

This block will show
the information which
would be collected in
the mail.

Describe condition

*

of your system.

Select your area or

*

the area cl os e to you.

Provide the e-mail
address that you would
like to s end the copy to.

Pr ovid e the na me of

*

the memor y module
manufacturer.

Provide the name of
th e powe r su ppl y
manufacturer and the
model no.

Se nd th e mai l out .

Sav e the se in forma tion to a .txt fil

Exit this dialog.

23

Motherboard Manual

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click

“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialo g appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information

will be saved to a .txt file.

24

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.

We will not share customer ’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.

If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web

http://www.biostar.com.tw/app/en-us/about/contact.php for getting

our contact information.

A770 A2G+

BIOS Update

BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.

AWARD BIOS AMI BIOS

Clear CMOS function

(Only for AWARD BIOS)

Show current BIOS information

Save cur rent BIOS

to a .bin file

Update BIOS

with a BIOS file

<Backup BIOS>

Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

After the saving process, finish
dialog will show. Click on OK to

complete the BIOS Backup
procedure.

25

Motherboard Manual

<Update BIOS>

Before doing this, please download the proper BIOS file from the website.

For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.

Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.

26

5.3 EXTRA INFORMATION

CPU Overheated

If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

A770 A2G+

27

Motherboard Manual

BIO-Flasher

BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.

The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12>
during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIO-Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, save the BIOS file into a USB pen drive or a floppy disk.

3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.

4. Power on or reset the computer and then
press <F12> during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press <Enter> to enter the utility.

28

5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press <Enter>
then <Y> to perform the BIOS
update process.

6. After the update process, the utility will ask you to reboot the system.
Press <Y> to proceed. BIOS update completes.

z This utility only allows storage device with FAT32/16 format and single

parti tion.

z Shutting down or resetting the system while updating the BIOS will lead to

system boot failure.

5.4 AMI BIOS BEEP CODE

Boot Block Beep Codes

Number of Beeps Description

1 No media present. (Insert diskette in floppy drive A:)

2

3 Insert next diskette if multiple diskettes are used for recovery
4 Flash Programming successful
5 File read error

7 No Flash EPROM detected
10 Flash Erase error
11 Flash Program error
12 “AMIBOOT.ROM” file size error

13

POST BIOS Beep Codes

Number of Beeps Description

1 Memory refresh timer error

3 Base memory read/write test error

6 Keyboard controller BAT command failed

7 General exception error (processor exception interrupt error)

8 Display memory error (system video adapter)

“AMIBOOT.ROM” file not found in root directory of diskette in
A:

BIOS ROM image mismatch (file layout does not match
image present in flash device)

A770 A2G+

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action

1, 3 Reseat the memory, or replace with known good modules.

Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.

6, 7

8

z If beep codes are generated when all other expansion

cards are absent, consult your system manufacturer’s
technical support.

z If beep codes are not generated when all other expansion

cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.

If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.

29

Motherboard Manual

5.5 TROUBLESHOOTING

Probable Solution

1. No power to the system at all
Power light don’t illuminate, fan
inside power supply does not turn
on.

2. Indicator light on keyboard does
not turn on.

System inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drive is spinning.

System does not boot from hard disk
drive, can be booted from optical drive.

System only boots from optical drive.
Hard disk can be read and applications
can be used but booting from hard disk
is impossible.

Screen message says “Invalid
Configuration” or “CMOS Failure.”

Cannot boot system after installing
second hard drive.

1. Make sure power cable is
securely plugged in.

2. Replace cable.

3. Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.

1. Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.

2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.

1. Back up data and applications
files.

2. Reformat the hard drive.
Re-install applications and data
using backup disks.

Review system’s equipment. Make sure
correct information is in setup.

1. Set master/slave jumpers
correctly.

2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

30

A770 A2G+

This page is intentionally left blank.

31

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES

G

ERMAN

Sp ezif ika tio nen

Sockel AM2 / AM2+

CPU

FSB

Chipsatz

Super E/A

Arbeitsspeich

er

IDE Int eg riert er IDE -Co ntrolle r

SATA II Integrierter Serial ATA-Controller

LAN Realtek RTL 8111C

Audio-Codec ALC662

Steckplätze

chluss

AMD Athlon 64 / Athlon 64 FX / Athlon 64

X2 / S empron / Phenom Prozessoren

(Maximales Watt: 95W)

Unterstützt HyperTransport 3.0 mit einer

Bandbreite von bis zu 5.2 GT/s

AMD 770

AMD SB700

ITE 8718

Biet et die häufig ver wend eten a lten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

DDR2 DIMM-Steckplätze x 4

Jeder DIMM unterstützt

512MB/1GB/2GB/4GB DDR2.

Max. 16GB Arbeitsspeicher

PCI Stec kp latz x 3

PCI Express Gen2 x16 Steckplatz x1

PCI Express Gen2x1 Steckplatz x2

Diskettenlaufwerkanschluss x1 Jeder Anschluss unterstützt 2 Diskettenlaufwerke Onboard-Ans

Druckeranschluss Anschluss x1 Jeder Anschluss unterstützt 1 Druckeranschluss

32

Die AMD 64-Architektur unterstützt eine 32-Bit- und

64-Bit-Datenverarbeitung

Unterstützt Hyper Transport 3.0 und PowerNow

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller

"Smart Guardian"-Funktion von ITE

Dual-Kanal DDR2 Speichermodul

Unterstützt DDR2 400 / 533 / 667 / 800

Unterstützt DDR2 1066 (by AM2+ CPU)

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

Ultra DMA 33 / 66 / 100 / 133 Bus Master- Modus

Unterstützt PIO-Modus 0~4,

Datentransferrate b is zu 3Gb/s

Konform mit der SATA-Spezifikation Version 2.0.

Unterstützt RAID 0,1,1+0

10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

5.1-Kanal-Audioausgabe

Unterstützt High-Definition Audio

Sp ezif ika tio nen

IDE-Anschluss x1 Jeder Anschluss unterstützt 2 IDE-Laufwerke

SATA-Anschluss x6 Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

CD-IN-Anschluss x1 Unterstützt die CD Audio-In-Funktion

CPU-Lüfter-Sockel x1

System-Lüfter-Sockel x2 System-Lüfter-Stromversorgungsanschluss

"CMOS lös chen "- Sockel x 1

USB-Anschluss x2

Serieller Anschluss x1

Stromanschluss (24-polig) x1

St romans ch luss (4- pol ig ) x 1

PS/2-Tastatur x1

Rückseiten-E

/A

Platinengröße 205 mm (B) X 305 mm (L) ATX

OS-Unterstüt

zung

PS/2-Maus x1

LAN-Anschluss x1

USB-Anschluss x6

Audioanschluss x3

Windows XP / VISTA

CPU-Lüfterstromversorgungsanschluss (mit Smart

Fan -F un ktion )

Jeder Anschluss unterstützt 2

Fronttafel-USB-Anschlüsse

Biostar behält sich das Recht vor, ohne Ankündigung

die Unterstützung für ein Betriebssystem

hinzuzufügen oder zu entfernen.

A770 A2G+

33

Motherboard Manual

j

FRENCH

Socket AM2 / AM2+

UC

Bus frontal

Chipset

Super E/S

Mémoire

principale

IDE Contrôleur IDE intégré

SATA II Contrôleur Serail ATA intégré

LAN Realtek RTL 8111C

Codec audio ALC662

Connecteur

embarqué

Processeurs AMD Athlon 64 / Athlon 64 FX /

Athlon 64 X2 / Sempron / Phenom

(Wat t max imu m : 95W)

Prend en charge Hyp er Transport 3.0

une bande passante de 5.2 GT/s

AMD 770

AMD SB700

ITE 8718

Fournit la fonctionnalité de Super E/S

patrimoniales la plus utilisée.

Int e rface à f aib le co mpte de b ro ch es

Fentes DDR2 DIMM x 4

Chaque DIMM prend en charge des DDR2 de

512 Mo/1 Go/2 Go/4 Go

Capac ité mémo ire max imal e de 16 Go

Fente PCI x3

Fente PCI Express Gen2 x16 x1 Fentes

Fente PCI Express Gen2 x1 x2

Connecteur de disquette x1

Connecteur de Port d'imprimante x1

SPEC

L'architecture AMD 64 permet le calcul 32 et 64 bits

Prend en charge Hyp er Transport 3.0 et PowerNow

usqu'à

Initiatives de contrôle environnementales,

Mon iteur d e mat ériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Module de mé mo ire DD R2 à mo d e à double vo ie

Prend en charge la DDR2 400 / 533 / 667 / 800

Prend en charge la DDR2 1066 (by AM2+ CPU)

Les DIMM à registres et DIMM avec code correcteurs

d'erreurs ne sont pas prises en charge

Mode principale de Bus Ultra DMA 33 / 66 / 100 /

133

Prend en charge le mode PIO 0~4,

Taux de transfert jusqu'à 3 Go/s.

Co nforme à la spéc ificat ion SATA Vers ion 2.0

Prise en charge RAID 0,1,1+0

10 / 100 / 1000 Mb /s négociation auto matique

Half / Full duplex capability

Sortie aud io à 5 .1 voies

Prise en charge de l' aud io haute déf init ion

Chaque connector prend en charge 2 lecteurs de

disquettes

Chaque connector prend en charge 1 Port

d'imprimante

34

Connecteur IDE x1

Connecteur SATA x6

Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant

Connecteur Aud io du panneau avant x 1 Prend en charge la fonct ion audio du pann eau avant

Connecteur d' entrée CD x1 Prend en charge la fonct ion d'entrée audio de CD

Embase de ventilateur UC x1

Embase de ventilateur système x2 Alimentation électrique du ventilateur système

Embase d'effacement CMOS x1

Connecteur USB x2

Port série x1

Connecteur d' aliment at ion x1

(24 broches)

Connecteur d' aliment at ion x 1

(4 broch es)

Clavier PS/2 x1

E/S du

panneau

arrière

Dimensions

de la carte

Support SE Windows XP / VISTA

Souris PS/2 x1

Port LA N x1

Port USB x6

Fiche aud io x3

205 mm (l) X 305 mm (H) ATX

A770 A2G+

SPEC

Chaque connecteur prend en charge 2 périphériques

IDE

Chaque co nne cteur pr end en ch arg e 1 périp hér iqu e

SATA

Alimentation électrique du ventilateur UC (avec

fonction de ventilateur intelligent)

Chaque connecteur prend en charge 2 ports USB de

panneau avant

Biostar se réserve le droit d'ajouter ou de supprimer

le support de SE avec ou sans préavis.

35

Motherboard Manual

ITALIAN

Socket AM2 / AM2+

CPU

FSB

Chipset

Super I/O

Memoria

principale

IDE Co ntro ller IDE integr at o

SATA II Controller Serial ATA integrato

LAN Realtek RTL 8111C

Codec

audio

Allo ggi

Connettori

su scheda

Processori AMD Athlon 64 / Athlon 64

FX / Athlon 64 X2 / Sempro n /

Phenom (Watt massimo: 95W)

Supporto di HyperTransport 3.0 fino a

5.2 GT/s di larghezza di banda

AMD 770

AMD SB700

ITE 8718

Fo rn isce le funz ional ità lega cy Super

I/O usate più comunemente.

Interfaccia LPC (Low Pin Count)

Alloggi DIMM DDR2 x 4

Ciascun DIMM supporta DDR2

512MB/1GB/ 2GB/4GB

Capacità massima della memoria

16GB

ALC662

Allo ggio PC I x3

Alloggio PCI Express Gen2 x16 x1

Alloggio PCI Express Gen2x1 x2

Connettore floppy x1 Ciascun connettore supporta 2 unità Floppy

Connettore Porta stampante x1 Ciascun connettore supporta 1 Porta stampante

Connettore IDE x1 Ciascun connettore supporta 2 unità IDE

Connettore SATA x6 Ciascun connettore supporta 1 unità SATA

SPECIFICA

L’arch itettura A MD 64 abilita la co mp ut az io ne 32

e 64 bit

Supporto di Hyper Transport 3.0 e PowerNow

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Co ntro ller velocit à vent olin a

Funzione "Smart Guardian" di ITE

Modulo di memoria DDR2 a canale doppio

Supporto di DDR2 400 / 533 / 667 / 800

Supporto di DDR2 1066 (by AM2+ CPU)

DIMM registrati e DIMM ECC non sono supportati

Modalità Bus Master Ultra DMA 33 / 66 / 100 /

133

Supporto modalità PIO Mode 0-4

Velocità di trasferimento dei dati fino a 3 Gb/s.

Co mpatibi le s pecifiche SATA Vers ione 2.0.

Supporto RAID 0,1,1+0

Negoziazione automatica 10 / 100 / 1000 Mb/s

Capacità Half / Full Duplex

Uscita audio 5.1 canali

Supporto audio High-Definition (HD)

36

I/O

pannello

posteriore

Dimension

i scheda

Sistemi

operativi

supportati

A770 A2G+

SPECIFICA

Co nnetto re pannello frontale x1 S uppo rt a i s er viz i del p anne llo fro ntale

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

Connettore CD-in x1 Supporta la funzione input audio CD

Co llet tor e vent olina C PU x1

Co llet tor e vent olina s is t ema x2 A liment az io ne ventolina di sis t ema

Co llet tor e cancel laz io ne CMOS x 1

Connettore USB x2

Porta seriale x1

Connetto re alimentazione x1

(24 pin)

Connetto re alimentazione x1

(4 pin)

Tas tiera P S /2 x 1

Mou se PS /2 x1

Porta LAN x1

Porta USB x6

Connettore audio x3

205 mm (larghezza) x 305 mm

(altez za)

Windows XP / VISTA

Alimentazione ventolina CPU (con funzione Smart

Fan)

Ciascun connettore supporta 2 porte USB

pannello frontale

ATX

Biostar si riserva il dir itto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo senza preavviso.

37

Motherboard Manual

SPANISH

Conector AM2 / AM2+

CPU

FSB

Conjunto de

chips

Súper E/S

Memoria

principal

IDE Controlador IDE integrado

SATA II Controlador Serial ATA integrado

Red Local Realtek RTL 8111C

Códecs de

sonido

Ranuras

Conectores

en p laca

Procesadores AMD Athlon 64 / Athlon 64

FX / Athlon 64 X 2 / Sempron / Pheno m

(Vatio máx imo: 95W )

Admite HyperTransport 3.0 con un ancho

de banda de hasta 5.2 GT/s

AMD 770

AMD SB700

ITE 8718

Le ofrece las funcionalidades heredadas de

us o más co mú n S úp er E /S.

Interfaz de cuenta Low Pin

Ranuras DIMM DDR2 x 4

Cada DIMM admite DDR de

512MB/1GB/2GB/ 4GB

Capacidad máxima de memoria de 16GB

ALC662

Ranura PCI X3

Ranura PCI Express Gen2 x16 X1

Ranura PCI express Gen2 x1 X2

Conector disco flexible X1 Cada conector soporta 2 unidades de disco flexible

Conector Puerto de impresora X1 Cada conector soporta 1 Puerto de impresora

Conector IDE X1 Cada conector soporta 2 dispositivos IDE

Especificación

La arquitectura AMD 64 permite el procesado de 32 y

64 bits

Soporta las tecnologías Hyper Transport 3.0 y

Power Now

In ic iativas de co ntrol d e ento rn o,

Monitor hardware

Controlador de velocidad de ventilador

Función "Guardia inteligente" de ITE

Módulo de memoria DDR2 de canal Doble

Admite DDR2 de 400 / 533 / 667 / 800

Admite DDR2 de 1066 (by AM2+ CPU)

No admite DIMM registrados o DIMM compatibles con

ECC

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133

Soporte los Modos PIO 0~4,

Tasas de transferencia de hasta 3 Gb/s.

Co mpat ible co n la ve rs ión S ATA 2.0.

Admite RAID 0,1,1+0

Negociación de 10 / 100 / 1000 Mb/s

Funciones Half / Full dúplex

Salida de sonido de 5.1 canales

Soporte de sonido de Alta Definición

38

Panel

trasero de

E/S

Ta mañ o de

la placa

Soporte de

sistema

operativo

A770 A2G+

Especificación

Conector SATA X6 Cada conector soporta 1 dispositivos SATA

Co nect or de p anel front al X1 Sop orta inst a lacio nes en e l p anel fro nt a l

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

Conector de entrada de CD X1 Soporta función de entrada de sonido de CD

Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con

función Smart Fan)

Cabecera de ventilador de sistema X2 Fuente de alimentación de ventilador de sistema

Cabecera de borrado de CMOS X1

Conector USB X2 Cada conector soporta 2 puertos USB frontales

Puert o s er ie X1

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1

(4 patillas)

Tec lad o PS /2 X 1

Ratón PS/2 X1

Puerto de red local X1

Puert o USB X 6

Conector de sonido X3

205 mm. (A) X 305 mm. (H) ATX

Windows XP / VISTA

Biostar se reserva el derecho de añadir o retirar el

soporte de cualquier SO con o sin aviso previo.

39

Motherboard Manual

PORTUGUESE

Socket AM2 / AM2+

CPU

FSB

Chipset

Especificaçã

o Super I/O

Memória

principal

IDE Controlador IDE integrado

SATA II Controlador Serial ATA integrado

LAN Realtek RTL 8111C

Codec de

som

Ranhuras

Conectores

na placa

Processadores AMD Athlon 64 / Athlon 64

FX / Athlon 64 X 2 / Sempron / Pheno m

(Watt máx imo: 95W )

Suporta a tecnologia HyperTransport 3.0

com u ma largura d e banda até 5.2 GT/s

AMD 770

AMD SB700

ITE 8718

Proporciona as funcionalidades mais

utilizadas em termos da especificação

Super I/O.

Interface LPC (Low Pin Count).

Ranhuras DIMM DDR2 x 4

Cada módulo DIMM suporta uma

memória DDR2 de 512 MB/1GB/2GB/4GB

Capac idade máx ima de me móri a: 16GB

ALC662

Ranhura PCI x3

Ranhura PCI Express Gen2 x16 x1

Ranhura PCI Express Gen2 x1 x2

Conector da unidade de disquetes x1 Cada conector suporta 2 unidades de d isquetes

Conector da para impressora x1 Cada conector suporta 1 Porta para impressora

Conector IDE x1 Cada conector suporta 2 dispositivos IDE

Conector SATA x6 Cada conector suporta 1 dispositivo SATA

ESPECIFICAÇÕES

A arq uite ctura AMD 64 p ermite u ma co mputaç ão d e 32

e 64 bits

Suporta as tecno logias Hyper Transport 3.0 e

Power Now

In ic iativas par a contro lo do a mb ient e

Monitorização do hardware

Controlador da velocidade da ventoinha

Função "Smart Guardian" d a ITE

Módulo de memória DDR2 de canal duplo

Suporta módulos DDR2 400 / 533 / 667 / 800

Suporta módulos DDR2 1066 (by AM2+ CPU)

Os módulos DIMM registados e os DIMM ECC não são

suportados

Modo Bus master U ltra DMA 33 / 66 / 100 / 133

Suporta o modo PIO 0~4,

Velocidades de transmissão de dados até 3 Gb/s.

Compatibilidad e co m a especificação SATA ve rsão 2.0.

Suporta as funções RA ID 0,1,1+0

Auto negociação de 10 / 100 / 1000 Mb/s

Capacidade semi/full-duplex

Saída de áudio de 5.1 canais

Suporta a especificação High-Definition Audio

40

Entradas /S

aídas no

painel

traseiro

Tamanho

da placa

Sistemas

operativos

suportados

A770 A2G+

ESPECIFICAÇÕES

Conector do painel frontal x1 Para suporte de várias funções no painel frontal

Conecto r de áud io frontal x1 Suporta a função de áud io no painel frontal

Conecto r para entrada d e CDs x1 Suport a a entrada de áudio a partir de CDs

Conector da ventoinha da CPU x1

Conector da ventoinha do s istema x2 Alimentação da ventoinha do sistema

Conector para limpeza do CMOS x1

Conector USB x2 Cada conector suporta 2 portas USB no painel frontal

Porta série x 1

Conector de alimentação x1

(24 pinos)

Conector de alimentação x1

(4 p inos )

Tec lad o PS /2 x 1

Rato PS/2 x1

Porta LAN x1

Porta USB x6

Tomada de áudio x3

205 mm (L) X 305 mm (A) ATX

Windows XP / VISTA

Aliment ação d a vento inh a da CP U (co m a fun ção S mart

Fan )

A Biostar reserva-se o direito de adicionar ou remover

suporte para qualquer sistema operativo com ou sem

av iso p révio.

41

Motherboard Manual

POLISH

Socket AM2 / AM2+

Procesor

FSB

Chipset

Pamięć

główna

Super I/O

IDE Zintegrowany kontroler IDE

SATA II Zintegrowany kontroler Ser ial ATA

LAN Realtek RTL 8111C

Kodek

dźwiękowy

Gniazda

Złącza

wbud owan e

AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 /

Sempron / Phenom Procesory

(Maksymalny Watt: 95W)

Obsługa HyperTransport 3.0 o szerokości pasma

do 5.2 GT/s

AMD 770

AMD SB700

Gniazda DDR2 DIMM x 4

Każde gniazdo DIMM obs ługuje moduły

512MB/1GB/2GB/4GB DDR2

Maks. wielkość pamięci 16GB

ITE 8718

Zapewnia najbardziej powszechne funkcje Super

I/O.

Interfejs Low Pin Count

ALC662

Gniazdo PCI x3

Gniazdo PCI Express Gen2 x16 x1

Gniazdo PCI Express Gen2 x1 x2

Złącze napędu dyskietek x1 Każde złącze obsługuje 2 napędy dyskietek

Złącze Port drukarki x1 Każde złącze obs ługuje 1 Port drukarki

Złącze IDE x1 Każde złącze obs ługuje 2 urządzenia IDE

SPEC

Architektura AMD 64 umożliwia przetwarzanie

32 i 64 bitowe

Obsługa Hyper Transport 3.0 oraz PowerNow

Mod uł pamięci DDR2 z trybem podwójnego

kana łu

Obsługa DDR2 400 / 533 / 667 / 800

Obsługa DDR2 1066 (by AM2+ CPU)

Brak obsług i Registered DIMM oraz ECC D IMM

Funkcje kontroli warunków pracy,

Mon itor H /W

Kontroler prędkości wentylatora

Funkcja ITE "Sm art Guard ian"

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master

obsługa PIO tryb 0~4,

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

Obsługa RAID 0,1,1+0

10 / 100 / 1000 Mb/s z automatyczn ą nego cjacją

szybkości

Działanie w trybie połowicznego/pełnego

dupleksu

5.1 kanałowe wyjście audio

Obsługa H igh -Defin ition Aud io

42

Back Panel

I/O

Wymiary

płyty

Obsluga

systemu

operacyjne

go

A770 A2G+

SPEC

Złącze SATA x6 Każde złącze obs ługuje 1 urządzenie SATA

Złącze panela przedniego x1 Obsługa elementów panela przedniego

Przedn ie z łącze aud io x1 Obs ługa funkcji audio na panelu przednim

Złącze wejścia CD x1 Obsługa funkcji wejścia audio CD

Złącze głó wko we wentylatora

procesora x1

Złącze głó wkowe wentylatora systemowego x2 Zasilanie wentylatora systemowego

Złącze głó wkowe kasowan ia

CMOS x1

Złącze USB x2

Port sz erego wy x1

Złącze zasilania (24 pinowe) x1

Złącze zas ilania (4 p ino we) x1

Klawiatura PS/2 x1

Mys z PS /2 x1

Port LA N x1

Port USB x6

Gniazdo audio x3

205 mm (S) X 305 mm (W) ATX

Windows XP / VISTA

Zasilanie wentylatora procesora (z funkcją Smart

Fan )

Każde złącze obs ługuje 2 porty USB na panelu

przednim

Biostar zastrzega sobie prawo dodawania lub

odwoływ ania obs ług i dowo ln ego systemu

operacyjnego b ez powiado mien ia.

43

Motherboard Manual

/

RUSSIAN

CPU
(центральн

ый
процессор)

FSB

Набо р
микросхем

Основная
память

Super I/O

IDE

SATA II

Локальна я
сеть

Звуко вой
кодек

Слоты

Встроенны
й разъём

Гнездо AM2 / AM2+
Процессоры AMD Athlon 64 / Athlon 64 FX

Athlon 64 X2 / Sempron / Phenom
(Макси мальный ватт: 95W)

Поддержка HyperTransport 3.0 с
пропускной способностью до 5.2 GT/s

AMD 770
AMD SB700

Слоты DDR2 DIMM x 4
Каждый модуль DIMM поддерживает
512МБ /1 ГБ /2 ГБ/4 ГБ DDR2
Максимальная ёмкость памяти 16ГБ

ITE 8718

Обеспечивает наиболее используемые
действующие фун кц и он альные
возможно сти Super I/O.
Интерфейс с низ ким количест вом выводов

Встроенное устр ойс тво упр авл ени я
встроенными интерфейсами устро йств

Встроенное устр ойс тво упр авл ени я
встроенными интерфейсами устро йств

Realtek RTL 8111C

ALC662

Слот PCI x3
Слот PCI Express Gen2 x16 x1
Слот PCI Express Gen2 x1 x2

Разъ ём НГМД x1

Разъ ём Порт подклю чения
принтера x1

Разъ ём IDE x 1

Разъ ём SATA x6 Каждый разъём поддерживает 1 устро йство SATA
Разъ ём на лицевой панели x1 Поддержка устройс тв на лицевой панели

СПЕЦ

Арх итектура A MD 64 разрешать обработка
данных на 32 и 64 бит
Поддержка Hyper Transport 3.0 и PowerNo w

Мод ул ь памяти с двух канальн ым режимом DDR2
Поддержка DDR2 400 / 533 / 667 / 800
Поддержка DDR2 1066 (b y AM2+ CPU)
Не поддерживает зарегистрированные модули

DIMM and ECC DIMM

Инициативы по охране окружающей среды,
Аппаратный монитор
Регул ятор скорости
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
Режим "хозяина" шины U ltra D MA 3 3 / 6 6 / 1 00 /

133

Поддержка режима PIO 0~4,
скорость передачи данных до 3 гигабит/с.
Соответствие специ фикации SATA верс ия 2.0.
Поддержка RAID 0,1,1+0
Автоматическо е согласо вани е 10 / 100 / 1000
Мб/с
Частичная / полна я дуплексная способность
Звуко вая поддержка High-Def in ition

5.1канальный звуковой выхо д

Каждый разъём поддерживает 2 накопителя на
гибких магнитных дисках
Каждый разъём поддерживает 1 По рт
подключения принтера
Каждый разъём поддерживает 2 встроенных
интерфейса накопителей

44

Задняя
панель
средств
ввода-выв
ода

Разм ер
панели

Поддержка

OS

A770 A2G+

СПЕЦ

Входной звуковой разъём x1

Разъ ём ввода для CD x1 Поддержка функции ввода для CD

Контактирующее приспособление
вентил ятора центрального процессора x1

Контактирующее приспособление
вентил ятора системы x2
Открытое контактирую щее
приспособление CMOS x1

USB- разъём x2

Последо вательны й порт x1
Разъ ем питания (24 вывод) x1
Разъ ем питания (4 вы вод) x1
Клавиатура PS/2 x1
Мышь PS /2 x1
Пор т LAN x1
USB- порт x6
Гнездо для подключени я
наушников x3

205 мм (Ш) X 305 мм (В) ATX

Windows XP / VISTA

Поддержка звуко вых функций на лицевой
панели

Источник питания для вентилято ра центрального
процессора (с функц ией интеллектуального
вентил ятора )

Источник пит ания для вентилятор а системы

Каждый разъём поддерживает 2 USB-порта на
лицевой панели

Biostar сохраняет за собой право добавлять или
удаля ть средства обеспечения для OS с или без
предварительного уведомления.

45

Motherboard Manual

ARABIC

ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎﺤﻟ ا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ 32 و64 ﺖﺏ

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗHyper Trans po rt و 3.0 PowerNow

تﺎﻔﺻاﻮﻤﻟا

ﺲﺒﻘﻡAM2 / AM2+

تﺎﺠﻟﺎﻌﻡAMD Athlon 64 / Athlon 64 FX / Athlon 64

X2 / S empron / Phenom

(طاو ىﻮﺼﻗ: 95و)

ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا

ﺔﻳﺰآﺮﻤﻟا

ةﺪﺣو ةﺮآاذ DDR2 ﺔﺝودﺰﻡ ةﺎﻨﻘﻟا

ﻢﻋﺪﺗ ةﺮآاﺬﻟا ﻦﻡ عﻮﻥ DDR2 تﺎﻌﺳ 800/667/533/400 ﺎﺠﻴﻡ

ﺖﻳﺎﺏ

ﻢﻋﺪﺗ ةﺮآاﺬﻟا ﻦﻡ عﻮﻥ DDR2 تﺎﻌﺳ 1066(By AM2+ CPU)

ﻻ ﻢﻋﺪﺗ ﻖﺋﺎﻗر ةﺮآاﺬﻟا DIMM ﻚﻠﺗو ﻲﺘﻟا ﻻ ﻖﻓاﻮﺘﺗ ﻊﻡ ECC

ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو:

ةﺰﻬﺝﻷا ﺔﻟﺎﺣ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻡ

ﺔﺣوﺮﻤﻟا ﺔﻋﺮﺳ ﻲﻓ ﺐﻗاﺮﻡ

ﺔﻔﻴﻇو"S mart Gu ard ian" ﻦﻡ IT E

ﺔﻴﻨﻘ ﺘﺏ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100 / 133

ﻲﺴﻴﺋر ﻊﺿو

ﻊﺿو ﻢﻋدPIO Mode 0~4

ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ تﺎ ﻥﺎﻴﺒ ﻟا ﻞﻘﻥ3 ﺖﺏﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ.

ﻴﻨﻘﺗ ﻢﻋﺪﺗ ﺔ HyperTransport ﻰﻟإ ﻞﺼﻳ ددﺮﺘﺏ 3.0 5.2 GT/s

AMD 770

AMD SB700

DIMM ﻢﻋﺪﺗ ةﺮآاذ ﻦﻡ عﻮﻥ DDR2 ﺔﻌﺳ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻡ ةﺮآاذ ﻢﻋﺪﺗ DDR2 ﺔﻌﺳ 512 ﺖﻳﺎﺏ ﺎﺠﻴﻡ

ﺎﺠﻴﻡ ﺖﻳﺎﺏ

ﺔﻔﻴﻇ و ﺮﻓﻮﺗSuper I/O اﺪﺨﺘﺳا ﺮﺜآﻷا ًﺎ ﻡ.

ﺗﻢﻋﺪ ﺔﻴﻨﻘﺗ Low Pin Co unt Interface

ﻢﻜﺤﺘﻡIDE ﻞﻡﺎﻜﺘﻡ

ﻲﺒﻥﺎﺠﻟا ﻲﻡﺎﻡﻷا ﻞﻗﺎﻨﻟا

ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻡ

ﺔﺤﺘﻓ DDR2 DIMM دﺪﻋ4

ﺔﻴﺴﻴ ﺋﺮﻟا ةﺮآاﺬﻟا

و1/و 2/و 4 ﺎﺠﻴﺝﺖﻳﺎﺏ ﺔﻌﺳ ةﺮآاذ ىﻮﺼﻗ 16 ﺎﺠﻴﺝ ﺖﻳﺎﺏ

ITE 8718

Super I/O

ﺬﻔﻨﻡIDE

تﺎﻔﺹاﻮﻤﻟ ﺔﻘﺏﺎﻄﻡSATA راﺪﺹﻹا 2.0.

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗRAID 0,1,1+0

ضوﺎﻔﺗ ﻲﺋﺎﻘﻠﺗ 10/100 ﺎﺠ ﻴﻡ ﺖﻳﺎﺏ /ﺔﻴﻥﺎﺙ و1ﺎﺠﻴﺝ ﺖﺏ/ﺔﻴﻥﺎﺙ

ﺔﻴﻥﺎﻜﻡإ ﻞﻘﻨﻟا جودﺰﻤﻟا ﻞﻡﺎﻜﻟا/ﻲﻔﺼﻨﻟا

ﻦﻡ ﻒﻳﺮﻌﺘﻟا ﻲﻟ ﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗ

5.1 تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ

ﻜﺤﺘﻡ ﻢSerial ATAﻞﻡﺎﻜﺘﻡ

Realtek RTL 8111C

ALC662

SATA II

ﺔﻴﻠﺥاد ﺔﻜﺒﺵ

ﺼﻟا ﻚﻳدﻮآتﻮ

46

ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ

رﺎﻄﺥإ نوﺪﺏ.

تﺎﻔﺻاﻮﻤﻟا

A770 A2G+

ﺔﺤﺘﻓPCI ﺪﻋ3

ﺔﺤﺘﻓGen2 x16 PCI Express دﺪﻋ1

ﺔﺤﺘﻓPCI Express Gen2 x1 دﺪ ﻋ2

ﺔﻥﺮﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻥﺮﻤﻟا صاﺮﻗﻸﻟ ﻦﻴآﺮﺤﻡ ﻢﻋﺪﻳ

ﺔﻌﺏﺎﻃ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡIDE دﺪﻋ1 ةﺰﻬﺝأ ﻦﻡ ﻦﻴﻨﺙا ﺬﻔﻨﻡ ﻞآ ﻢﻋﺪﻳIDE

ﺬﻔﻨﻡSATA دﺪﻋ6 ةﺰﻬﺝأ ﻦﻡ ﺪﺣاو ﺬﻔﻨﻡ ﻞآ ﻢﻋﺪﻳSATA

ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟا تاﺰﻴﻬﺠﺗ ﻢﻋﺪﻳ

ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟﺎﺏ تﻮﺼﻟا ﺔﻔﻴﻇو ﻢﻋﺪﻳ

ﺬﻔﻨﻡCD-IN دﺪﻋ1 ﻟا تﻮﺹ ﻞﺥد ﺔﻔﻴﻇو ﻢﻋﺪﻳﺞﻡﺪﻤﻟا صﺮﻘ

ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو دﺪﻋ1 ﺔﻔﻴﻇو ﻊﻡ ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺘﻟSmart Fan

مﺎﻈﻨﻟا ﺔﺣوﺮﻡ ﺔﻠﺹو ﺪﻋ2 مﺎﻈﻨﻟا ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄ ﻟا ﻞﻴﺹﻮﺘﻟ

ﺢﺴﻡ ﺔﻠﺹوCMOS دﺪﻋ1

ﺬﻔﻨﻡUS B دﺪﻋ2 ﻲﺘﺤﺘﻓ ﺬﻔﻨﻡ ﻞآ ﻢﻋﺪﻳUSBﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟﺎﺏ

ﻲﻠﺴﻠﺴﺗ ﺬﻔ ﻨﻡ دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)24سﻮﺏد( دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)4ﺲﻴﺏﺎﺏد( دﺪﻋ12

ﺢﻴﺗﺎﻔﻡ ﺔﺣﻮﻟPS/2 دﺪﻋ1

سوﺎﻡ PS/2 دﺪﻋ1

ﺔﻴﻠﺤﻡ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻡ ﺪﻋ1

ﺬﻓﺎﻨﻡUSB دﺪﻋ6

تﻮﺹ ﺲﺒﻘﻡ دﺪﻋ3

205 ﻢﻡ)ضﺮﻋ (X 305 ﻢﻡ)عﺎﻔﺗرا( AT X

Windows XP / VISTA

تﺎﺤﺘﻔﻟا

ﺢﻄﺳ ﻰﻠﻋ ﺬﻓﺎﻨﻤﻟا

ﺔﺣﻮﻠﻟا

ﻞﺥد ﺬﻓﺎﻨﻡ/ جﺮﺥ

ﺔﻴﻔﻠﺨﻟا ﺔﺣﻮﻠﻟا

ﺔﺣﻮﻠﻟا ﻢﺠﺣ

دﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻥأ ﻢﻋ

47

Motherboard Manual

/

JAPANESE

Socket AM2 / AM2+

CPU

FSB

チップセット

メインメモリ

Super I/O

IDE 統合 IDE コントローラ

SATA II 統合Serial ATAコントロ ーラ

LAN Realtek RTL 8111C

サウンド

Codec

オンボードコ

ネクタ

AMD Athlon 64 / Athlon 64 FX

/ Sempron / Ph eno m プロセッ サ

(最高 のワット : 95W )

5.2 GT/sのバンド 幅まで ハイパート ランスポー ト

3.0をサポート します

AMD 770

AMD SB700

DDR2 DIMMスロット x 4

各DIMMは 512MB/1GB/2GB/4GB DDR2をサ

ポート

最大メモリ容 量16GB

ITE 8718

もっとも一般 に使 用されるレ ガシーSuper I/O機

能を採用して いま す。

低ピンカウン トイ ンターフェ イス

ALC662

PCIスロット x3

PCI Express Gen2 x16スロット x1 スロット

PCI Express Gen2 x1スロ ット x2

フロッピーコ ネク タ x1 各コネクタは 2つのフロ ッピードラ イブをサポ ートし ます

プリンタポー トコ ネクタ x1 各コネ クタは 1つのプリンタポ ート をサポート します

IDE コネクタ x1 各コネ クタは2つのID Eデバ イスをサポ ートし ます

SATAコネクタ x6 各コネクタは 1つのSATAデバイスをサポ ート します

仕様

Athlon 64 X2

AMD 64アーキ テクチャで は、32ビットと64ビット計算が

可能です

ハイパートラ ンス ポート3.0と クールアン ドクワイア ット

をサポートし ます

デュアル チ ャン ネルモードDDR2メモリモジ ュール

DDR2 400 / 533 / 667 / 800をサポー ト

DDR2 1066をサ ポート (by AM2+ CP U)

登録済みDIMMとECC DIMMはサポ ートされま せん

環境コントロ ール イニシアチ ブ、

H/Wモニター

ファン速度コ ント ローラ/ モニター

ITE の「スマート ガー ディアン」 機能

Ultra DMA 33 / 66 / 100 / 133バスマ スタモード

PIO Mode 0~4のサポート 、

最高3 Gb/秒の データ転送 速度

SATAバージョン2.0仕様に準拠。

RAID 0,1,1+0のサ ポート

10 / 100 / 1000 Mb/秒のオート ネゴシ エーション

半/全二重機能

ハイデフィニ ショ ンオーディ オのサポー ト

5.1 チ ャンネルオ ーディ オアウト

48

仕様

フロントパネ ルコ ネクタ x1 フロン トパネ ル機能をサ ポー トします

フロントオー ディ オコネクタ x1 フロン トパネルオ ーディオ機 能をサ ポートしま す

CDインコネクタ x1 CDオーディオイ ン機 能をサポー トします

CPUファンヘッダ x1 CPUファン電源装置(スマ ートファン 機能を搭載 )

システムファ ンヘ ッダ x2 システムファ ン電 源装置

CMOSクリアヘッダ x1

USBコネク タ x2

シリアルポー ト x1

電源コネクタ (24 ピン) x1

電源コネクタ (4ピン) x1

PS/2キーボード x1

背面パネル

I/O

ボードサイズ 205 mm (幅) X 305 mm (高さ) ATX

OSサポー ト Windows XP / VISTA

PS/2マウス x1

LANポート x1

USBポート x6

オーディオジ ャッ ク x3

各コネクタは 2つのフロ ントパネル USBポートをサ ポート

します

Biostarは事前の サポートな しにOSサ ポー トを追加ま たは

削除する権利 を留 保します。

A770 A2G+

2008/10/16

49