Biostar A55MGC, A55MLC2 Owner's Manual

Page 1

A55MLC2/A55MLV2/A55MGC Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with t he instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.

Dichiar azione di co nform ità sintetica

Ai sensi dell’art. 2 comma 3 del D.M. 275 del 30/10/2002

Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive

2004/108/CE, 2006/95/CE e 1999/05/CE

quando ad esso applicabili

Short De clar ation of conf ormity

We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives

2004/108/CE, 2006/95/CE and 1999/05/CE

whenever these laws may be applied

Page 2

Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start ................................................................................ 1

1.2 Package Checklist ............................................................................. 1

1.3 Motherboard Features ...................................................................... 2

1.4 Re ar Panel Connectors ..................................................................... 3

1.5 Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 5

2.1 Installing Central Processing Unit (CPU) ....................................... 5

2.2 FAN Headers ...................................................................................... 7

2.3 Installing System Memory ................................................................ 8

2.4 Connectors and Slots ....................................................................... 10

Chapter 3: Headers & Jumpers Setup ................... 12

3.1 How to Setup Jumpers .................................................................... 12

3.2 Detail Settings .................................................................................. 12

Chapter 4: AMD DUAL Graphics Technology ......... 15

4.1 AMD Dual Graphics Technology Introduction............................. 15

4.2 AMD Dual Graphics Re quirement ................................................ 15

4.3 AMD Dual Graphics Setup.............................................................. 16

Chapter 5: RAID Functions .................................. 17

5.1 Operating System ............................................................................ 17

5.2 Raid Arrays ...................................................................................... 17

5.3 How RAID Works ............................................................................. 17

Chapter 6: Useful Help ........................................ 20

6.1 Driver Installation Note.................................................................. 20

6.2 Software ............................................................................................ 21

6.3 Extra Information............................................................................ 25

6.4 AMI BIOS Beep Code ....................................................................... 27

6.5 Troubleshooting ............................................................................... 28

Appendix: SPEC In Other Languages ................... 29

German .................................................................................................................. 30

French .................................................................................................................... 32

Italian..................................................................................................................... 34

Spanish ................................................................................................................... 36

Portuguese ............................................................................................................ 38

Polish ...................................................................................................................... 40

Russian ................................................................................................................... 42

Arabic..................................................................................................................... 44

Japane se ................................................................................................................ 46

Page 3

CHAPTER 1: INTRODUCTION

A55MLC2/A55MLV2/A55MGC

1.1 B

EFORE YOU START

Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with

sufficient lighting.

 Always disconnect the computer from power outlet

before operation.

 Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

 Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

 The operating temperatures of the computer should be

0 to 45 degrees Celsius.

1.2 PACKAGE CHECKLIST

Serial ATA Cable x2 Rear I/O Panel for ATX Case x1 Installation Guide x1 Fully Setup Driver DVD x1

Note : The package contents may be different due to area or your motherboard version.

Page 4

Motherboard Manual

1.3 MOTHERBOARD FEATURES

SPEC

Socket FM1

CPU

Chipset AMD A55

Super I/O

Main

Memory

SATA II Integrated Serial ATA Controller

LAN

AMD A-Series / E2-Series / Athlon II /

Sempron processors

ITE 8772E

Prov ides t he most commonly used leg acy

Super I/O functionality

Low Pin Count Interface

DDR3 DIMM Slots x 2

Max Memory Capacity 16GB

Each DIMM supports 512MB/

1GB/2GB/4GB/8GB DDR3

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

computing

(Maximum Watt: 100W)

AMD 64 Architecture enables 32 and 64 bit

En vironment Con trol in it iatives

H/W Mon itor

Fan Sp eed Co ntroller

ITE's "S mart Guardian " function

Dual Cha nnel Mode DDR3 memory module

Supports DDR3 800/1066/1333/1600/1866

Data transfer rates up to 3 Gb/s.

SATA Vers ion 2.0 s pec ific at ion co mp liant .

RAID 0,1,10 support

10 / 100 Mb/s auto negotiation

10 / 100 / 1000 Mb/s auto negotiation

Sound ALC662

PCI Express Gen2 x16 S lot x1 Supports PCI-E Gen2 x16 expans ion card

Slots

PCI Express x1 Slot x1 Supports PCI-E Gen2 x1 expansion card

SATA Connector x4 Each connect or s upports 1 SATA device

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

On Board

CPU Fan Header x1 CPU Fan power supply (with Smart Fan function)

Connectors

System Fan Header x1 System Fan Power supply

CMOS clear Header x1 Restore CMOS data to factory default

USB2.0 Connector x2 Each connector supports 2 fro nt panel USB2.0 po rts

5.1channels audio out

Supports HD Audio

Page 5

A55MLC2/A55MLV2/A55MGC

SPEC

Serial Port Connector x1 Connects to RS-232 Port

Power Connector (24-Pin) x1 Connects to Power supply

Power Connector (4-Pin) x1 Connects to Power supp ly

PS/2 Keyboard / Mous e x1

VGA Port x1

Rear Panel

LAN port x1

I/O

USB2.0 Port x4

Audio Jack x3

Board Size 175 mm (W) x 226 mm (L) uATX

Windows XP / Vista / 7

Support

Connects to PS/2 Keyboard / Mouse

Connect to D-SUB monitor

Connect to RJ-45 ethernet cable

Connect to USB2.0 devices

Provide Audio-In/Out and Mic. connection

Biostar reserves the right to add or remove support

for any OS With or without notice.

1.4 REAR PANEL CONNECTORS

NOTE: VGA Output require an AMD family processor with intedrated graphics.

NOTE: Since the audio chip supports High Definition Audio Specification, the function of each

NOTE: Maximum resolution:

audio jack can be defi ned by software. The input / output function of each audio jack listed above represents the default setting. However, when connecting external microphone to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.

VGA: 1920 x 1600 @75Hz

Page 6

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

Note: represents the 1■

pin.

Page 7

A55MLC2/A55MLV2/A55MGC

CHAPTER 2: HARDWARE INSTALLATION

2.1 I

NSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Pull the socket locking out from the socket and then raise the

lever up to a 90-degree angel.

Step 2: Look for the white triangle on socket, and the gold triangle on

CPU should point towards this white triangle. The CPU will fit only in the correct orientation.

Page 8

Motherboard Manual

Step 3: Hold the CPU down firmly, and then close the lever to locked the

position

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to the CPU_FAN1. This completes the installation.

Page 9

A55MLC2/A55MLV2/A55MGC

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.

CPU_FAN1: CPU Fan Header

Assignment

1 Ground 2 +12V 3

FAN RPM rate sense

4 Smart Fan Control (By Fan)

SYS_FAN1: System Fan Header

Pin Assignment

1 Ground 2 +12V 3

FAN RPM rate sense

Note:

CPU_FAN1, SYS_FAN1 support 4-pin and 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.

Page 10

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. DDR3 Modules

Step1:

Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.

Page 11

A55MLC2/A55MLV2/A55MGC

Step2:

Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.

Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

B. Memory Capacity

DIMM Socket

Location

DDR3_A1 512MB/1GB/2GB/4GB/8GB

DDR3_B1 512MB/1GB/2GB/4GB/8GB

DDR3 Module

Total Memory Size

Max is 16GB.

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DDR3_A1 DDR3_B1

Disabled O X

Disabled X O

Enabled O O

(O means memory installed, X means memory not installed.)

Note:

The DRAM bus width of the memory module must be the same (x8 or x16)

D. DDR Speed Support

Please refer to the following table for DDR speed reference:

# of DIMM per Channel # of Ranks per DIMM

1 of 1 UDIMM xR DDR3-1866

1 of 2 UDIMMs xR DDR3-1600 / DDR3-1333

Max DDR Speed Grade

for 1.50V DIMM

Note:

xR: Single or double side memory moudule

Page 12

Motherboard Manual

2.4 CONNECTORS AND SLOTS

ATXP W R2: ATX Power Source Connector

This connector will provide +12V to CPU power circuit.

Pin Assignment

1 +12V 2 +12V 3 Ground 4 Ground

ATXP W R1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX power supply.

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V 14 -12V 2 +3.3V 15 Ground 3 Ground 16 PS_ON 4 +5V 17 Ground 5 Ground 18 Ground 6 +5V 19 Ground 7 Ground 20 NC 8 PW_OK 21 +5V 9 Standby Voltage+5V 22 +5V 10 +12V 23 +5V 11 +12V 24 Ground 12 +3.3V

Note: Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors have been plugged-in.

Page 13

A55MLC2/A55MLV2/A55MGC

PEX16_1: PCI-Express Gen2 x16 Slot

- PCI-Express 2.0 compliant.

- Maximum theoretical realized bandwidth of 8GB/s simultaneously per

direction, for an aggregate of 16GB/s totally.

- PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.

PEX1_1: PCI-Express x1 Slot

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.

SATA1~SATA4: Serial ATA Connectors

These connectors connect to SATA hard disk drives via SATA cables. Those satisfy the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Assignment

1 Ground 2 TX+ 3 TX4 Ground 5 RX6 RX+ 7 Ground

Page 14

Motherboard Manual

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 H

OW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.

Pin Assignment Function Pin Assignment Function

1 +5V 2 N/A 10 N/A 3 N/ A 11 N/ A N/A 4 Speaker 12 Power LED (+) 5 HDD LED (+) 6 HDD LED (-) 14 Power LED (-) 7 Ground 8 Reset control 16 Ground

Speaker Connector

Hard drive LED

Reset button

9 N/A

13 Power LED (+)

15 Power button

N/A

Power LED

Power-on button

Page 15

A55MLC2/A55MLV2/A55MGC

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.

Assignment

1 +5V (fused) 2 +5V (fused) 3 USB4 USB5 USB+ 6 USB+ 7 Ground 8 Ground 9 NC

10 Key

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front panel. This header supports HD and AC’97 audio front panel connector.

HD Audio AC’97

Pin Assignment Pin Assignment

1 Mic Left in 1 Mic In 2 Ground 2 Ground 3 Mic Right in 3 Mic Power 4 GPIO 4 Audio Power 5 Right line in 5 RT Line Out 6 Jack Sense 6 RT Line Out 7 Front Sense 7 Reserved 8 Key 8 Key 9 Left line in 9 LFT Line Out

10 Jack Sense 10 LFT Line Out

Note1: It is recommended that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high definition audio capability.

Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an AC'97 front audio output cable. The function can be found via O.S. Audio Utility.

Page 16

Motherboard Manual

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Load Optimal Defaults and save settings in CMOS.

Pin 1-2 Close:

Normal Operation (default).

Pin 2-3 Close:

Clear CMOS data.

J_COM1: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Assignment

1 Carrier detect 2 Received data 3 Transmitted data 4 Data terminal 5 Signal ground 6 Data set ready 7 Request to send 8 Clear to send 9 Ring indicator

10 NC

Page 17

A55MLC2/A55MLV2/A55MGC

CHAPTER 4: AMD DUAL GRAPHICS TECHNOLOGY

4.1 AMD

DUAL GRAPHICS TECHNOLOGY INTRODUCTION

When user adds a PCIE display adapter, it can be integrated with IGD to show better performance. To make the two video devices work simultaneously and normally, please refer to the following setting.

4.2 AMD DUAL GRAPHICS REQUIREMENT

Operating System: Windows Vista / Windows 7

Supported DUAL Graphics Combinations:

APU

GFX

HD 6670 Attach Only (No DG)

HD 6570 Attach Only (No DG)

HD 6450

HD 6350

Note:

“Attach Only (No DG)” indicates supported discrete graphics attachment

without Dual Graphics. E-Series CPU does not support Dual Graphics. Single Channel or unbalanced memory does not support Dual Graphic

function. Please use at least DDR3-1333 4G (2G+2G). The information described above in this manual is for your reference only

and the actual information and settings on board may be different from

this manual. For further AMD Dual Graphics information, please visit the

following website: http://www.amd.com

A4-Series HD 6410D

A6-Series HD 6530D

Y Y Y

Attach Only (No DG)

A8-Series HD 6550D

Y Y

Attach Only (No DG)

Page 18

Motherboard Manual

4.3 AMD DUAL GRAPHICS SETUP

Step 1: Insert Dual Graphics-Ready graphics card into PEX16_1 slot.

Step 2: Set the BIOS setting as follows:

[Chipset]→[North Bridge]→[Surround View]→[Enabled]

Step 3: Install Driver DVD Chipset Driver, and reboot the system. Activate AMD

VISION Engine Control Center to make sure CrossFire has been enabled.

Page 19

CHAPTER 5: RAID FUNCTIONS

A55MLC2/A55MLV2/A55MGC

5.1 O

Supports Windows Vista and Windows 7.

PERATING SYSTEM

5.2 RAID ARRAYS

RAID supports the following types of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for

many applications.

RAID 1: RAID 1 defines techniques for mirroring data.

RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.

5.3 HOW RAID WORKS

RAID 0:

The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large f ile into smaller blocks and performs disk reads and writes across multip le drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

 Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the

platform.

 Uses: Intended for non-critical data requiring high data throughput, or any

environment that does not require fault tolerance.

 Benefits: provides increased data throughput, especially for large files. No

capacity loss penalty for parity.

 Drawbacks: Does not deliver any fault tolerance. If any drive in the array

fails, all data is lost.

 Fault Tolerance: No.  Total Capacity: (Minimal. HDD Capacity) x (Connected HDDs Amount)

Block 1 Blo ck 3 Blo ck 5

Block 2 Blo ck 4 Blo ck 6

Page 20

Motherboard Manual

RAID 1:

Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.

RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media.

Features and Benefits

 Drives: Minimum 2, and maximum is 2.  Uses: RAID 1 is ideal for small databases or any other application that

requires fault tolerance and minimal capacity.

 Benefits: Provides 100% data redundancy. Should one drive fail, the

controller switches to the other drive.

 Drawbacks: Requires 2 drives for the storage space of one drive.

Performance is impaired during drive rebuilds.

 Fault Tolerance: Ye s .

Block 1 Block 2 Block 3

Page 21

A55MLC2/A55MLV2/A55MGC

RAID 10:

RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance.

Features and Benefits

 Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.  Benefits: Optimizes for both fault tolerance and performance, allowing for

automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.

 Drawbacks: Requires twice the available disk space for data redundancy,

the same as RAID level 1.

 Fault Tolerance: Ye s .

Block 1 Block 3 Block 5

Block 2 Block 4 Block 6

Page 22

Motherboard Manual

CHAPTER 6: USEFUL HELP

6.1 D

RIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup Driver DVD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver DVD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver DVD. Click on the Manual icon to browse for available manual.

Note:

Yo u will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from http://www.adobe.com/products/acrobat/readstep2.html

Page 23

A55MLC2/A55MLV2/A55MGC

6.2 SOFTWARE

Installing Software

1. Insert the Setup DVD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled.

2. Select Software Installation, and then click on the respective software title.

3. Follow the on-screen instructions to complete the installation.

Launching Software

After the installation process, you will see the software icon “eHOT Line” / “BIOS Update” appears on the desktop. Double-click the icon to launch the utility.

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.

Before you use this uti lity, please set Outlook E xpress as your default e-mail client applicatio n program.

re pr esen ts i mpor ta nt

information that you must provide. Without this information, y ou may not be able to send out the mail.

This block will show the information which would be collected in the mail.

Describe condition

of your system.

Select your area or

the area close to you.

Provide the e-mail address that you would like to send the copy to.

Pr ovid e the nam e of

the memory module manufacturer.

Provide the name of th e powe r su ppl y manufacturer and the model no.

Se nd th e mai l out .

Sav e the se in forma tion to a .txt fil

Exit this dialog.

Page 24

Motherboard Manual

After filling up this informatio n, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click

“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name.

Enter the file name and then click “Save”. Your system information

will be saved to a .txt file.

Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.

We will not share custo mer ’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.

If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web

http://www.biostar.com.tw/app/en-us/about/contact.php for getting

our contact information.

Page 25

A55MLC2/A55MLV2/A55MGC

BIOS Update

BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system.

AWARD BIOS AMI BIOS

Clear CMOS function

(Only for AWARD BIOS)

Show current BIOS information

Save cur rent BIOS

to a .bin file

Update BIOS

with a BIOS file

Once click on this button, the saving

dialog will show. Choose the

position to save file and enter file

name. (We recommend that the file

name should be English/number

and no longer than 7 characters.)

Then click Save.

Page 26

Motherboard Manual

Before doing this, please download the proper BIOS file from the website.

For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first.

Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.

After the BIOS Backup procedure, the open dialog will show for requesting the BIOS file which is going to be updated. Please choose the proper BIOS file for updating, then click on Open.

The utility will update BIOS with the proper BIOS file, and this process may take minutes. Please do not open any other applications during this process.

After the BIOS Update process, click on OK to restart the system.

While the system boots up and the full screen logo shows, press <Delete> key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed without notice. For better performance, the software is being continuously updated. The information and pictures described above are for your reference only. The actual information and settings on board may be slightly different from this manual.

Page 27

6.3 EXTRA INFORMATION

CPU Overheated

If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdow n automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data. (See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

A55MLC2/A55MLV2/A55MGC

Page 28

Motherboard Manual

BIO-Flasher

BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk.

The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12> during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIO-Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, save the BIOS file into a USB pen drive or a floppy disk.

3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the USB port or the floppy disk drive.

4. Power on or reset the computer and then press <F12> during the POST process. A select dialog as the picture on the right appears. Select the device contains the BIOS file and press <Enter> to enter the utility.

5. The utility will show the BIOS files and their respective information. Select the proper BIOS file and press <Enter> then <Y> to perform the BIOS update process.

6. After the update process, the utility will ask you to reboot the system. Press <Y> to proceed. BIOS update completes.

z This utility only allows storage device with FAT32/16 format and single

partition.

z Shutting down or resetting the system while updating the BIOS will lead to

system boot failure.

Page 29

A55MLC2/A55MLV2/A55MGC

6.4 AMI BIOS BEEP CODE

Boot Block Beep Codes

Number of Beeps De scription

1 No media present. (Insert diskette in floppy drive A:)

3 Insert next diskette if multiple diskettes are used for recovery 4 Flash Programming successful 5 File read error

7 No Flash EPROM detected 10 Flash Erase error 11 Flash Program error 12 “AMIBOOT.ROM” file size error

POST BIOS Beep Codes

Number of Beeps De scription

1 Memory refresh timer error

3 Base memory read/write test error

6 Keyboard controller BAT command failed

7 General exception error (processor exception interrupt error)

8 Display memory error (system video adapter)

“AMIBOOT.ROM” file not found in root directory of diskette in A:

BIOS ROM image mismatch (file layout does not match image present in flash device)

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action

1, 3 Reseat the memory, or replace with known good modules.

Fatal error indicating a serious problem with the system. Consult your system manufacturer. Before declaring the motherboard beyond all hope, eliminate the possibility of interference by a malfunctioning add-in card. Remove all expansion cards except the video adapter. z If beep codes are generated when all other expansion

6, 7

cards are absent, consult your system manufacturer’s technical support.

z If beep codes are not generated when all other expansion

cards are absent, one of the add-in cards is causing the malfunction. Insert the cards back into the system one at a time until the problem happens again. This will reveal the

malfunctioning card. If the system video adapter is an add-in card, replace or reseat the video adapter. If the video adapter is an integrated part of the

system board, the board may be faulty.

Page 30

Motherboard Manual

6.5 TROUBLESHOOTING

Probable Solution

1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work

2. Indicator light on keyboard does not shine.

System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.

System does not boot from a hard disk drive, but can be booted from optical drive.

System only boots from an optical drive. Hard disks can be read, applications can be used, but system fails to boot from a hard disk.

Screen message shows “Invalid Configuration” or “CMOS Failure.”

System cannot boot after user installs a second hard drive.

1. Make sure power cable is securely plugged in.

2. Replace cable.

3. Contact technical support.

Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place.

1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.

2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.

1. Back up data and applications files.

2. Reformat the hard drive. Re-install applications and data using backup disks.

Review system’s equipment. Make sure correct information is in setup.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.

Page 31

A55MLC2/A55MLV2/A55MGC

This page is intentionally left blank.

Page 32

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES

ERMAN

Spezifikationen

Sockel FM1

CPU

Chipsatz AMD A55

Super E/A

Arbeitsspeic

her

SATA II Integrierter Serial ATA-Controller

LAN

AMD A-Series / E2-Series / Athlon II /

Sempron Prozessoren

ITE 8772E

Biet et die häufig verwendeten alten Sup er

E/A-Funktionen.

Low Pin Count-Schnittstelle

DDR3 DIMM-Steckplätze x 2

Max. 16GB Arbeitsspeicher

Jeder DIMM unterstützt 512MB/

1GB/2GB/4GB/8GB DDR3.

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

und 64-Bit-Datenverarbeitung

unterstützt.

Die AMD 64-Architektur unterst ütz t eine 32-Bit-

(Maximales Watt: 100W)

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehza hl-Controller

"Smart Guardian"-Funktion von ITE

Dual-Kanal DDR3 Speichermodul

Unterstützt DDR3 800/1066/1333/1600/1866

registrierte DIMMs. ECC DIMMs werden nicht

Datentransferrate b is zu 3 Gb/s

Konform mit der SATA-Spezifikation Version 2.0

Unterstützt RAID 0,1,10

10 / 100 Mb/s Auto-Negotiation

10 / 100 / 1000 Mb/s Auto-Negotiation

Audio-Codec ALC662

PCI Express Gen2 x16 Steckplatz x1

Steckplätze

PCI Express x1 Steckplatz x1

SATA-Anschluss x4 Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen

Onboard-An

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

schluss

CPU-Lüfter-Sockel x1

5.1-Kanal-Audioausgabe

Unterstützt High-Definition Audio

CPU-Lüfterstromversorgungsanschluss (mit Smart

Fan -F un ktion )

Page 33

A55MLC2/A55MLV2/A55MGC

Spezifikationen

System-Lüfter-Sockel x1 System-Lüfter-Stromversorgungsanschluss

"CMOS lös chen "-Sockel x 1

USB2.0-Anschluss x2 Jeder Anschluss unterstützt 2

Fron ttafe l-USB 2.0-A nschlü ss e

Serieller Anschluss x1

Stromanschluss (24-polig) x1

St romans ch luss (4 -polig ) x1

Rückseiten-

E/A

Platinengröß

OS-Unterstü

tzung

PS/2-Tastatur / Maus x 1

VGA-Anschluss x1

LAN-Anschluss x1

USB2.0-Anschluss x4

Audioanschluss x3

175 mm (B) X 226 mm (L)

Windows XP / Vista / 7

Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ein

Betriebssystem hinzuzufügen oder zu entfernen.

Page 34

Motherboard Manual

FRENCH

SPEC

Socket FM1

Chipset AMD A55

Super E/S

Mémoire

principale

SATA II

LAN

Processeurs AMD A-Series / E2-Series /

Athlon II / Sempron

ITE 8772E

Fournit la fonctionnalité de Super E/S

patrimoniales la plus utilisée.

Int erface à faib le co mpt e de b roches

Fentes DDR3 DIMM x 2

Capac ité mémo ir e max i male de 16Go

Chaque DIMM prend en charge des DDR3

de 512Mo/1Go /2Go /4Go/8Go

Contrô leur Serial ATA int é gr é

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

d'erreurs ne sont pas prises en charge

L'architecture AMD 64 permet le calcul 32 et 64 bits

(Watt maximum : 100W)

Initiatives de contrôle environnementales,

Mon iteur d e mat ériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Module de mé mo ire DDR3 à mode à doub le voie

Prend en charge la DDR3 800/1066/1333/1600/1866

Les DIMM à registres et DIMM avec code correcteurs

Taux de transfert jusqu'à 3 Go/s.

Co nforme à la s pécificat ion SATA Vers ion 2.0

Prise en ch arge RAID 0,1,1 0

10 / 100 Mb/s négociation auto mat ique

10 / 100 / 1000 Mb /s négociation automatique

Codec

aud io

Fentes

Connecteu

r embarqué

ALC662

Sortie audio à 5.1 vo ies

Prise en charg e de l'audio haut e définition

Fente PCI Express Gen2 x16 x1

Fente PCI Express x1 x1

Chaque co nnecteur prend en charge 1 pér iphériqu e

Connecteur SATA x4

SATA

Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1 Prend en charge la fonction audio du panneau avant

Alimentation électrique du ventilateur UC (avec

Embase de ventilateur UC x1

fonction de ventilateur intelligent)

Embase de ventilateur système x1 Alimentation électrique du ventilateur système

Page 35

SPEC

Embase d'effacement CMOS x1

A55MLC2/A55MLV2/A55MGC

E/S du

panneau

arrière

Dimension

s de la carte

Support

Connecteur USB2.0 x2

Port série x1

Connecteur d' alimentation x 1

(24 broches)

Connecteur d' alimentation x1

(4broches)

Clavier / Souris PS/2 x1

Port VGA x1

Port LAN x 1

Port USB2.0 x4

Fiche aud io x3

175 mm (l) X 226 mm (H)

Windows XP / Vista / 7

Chaque co nnecteur prend en charge 2 ports USB2.0

de panneau avant

Biostar se réserve le droit d'ajouter ou de supprimer le

support de SE avec ou sans préavis.

Page 36

Motherboard Manual

ITALIAN

SPECIFICA

CPU

Chipset

Super I/O

Memoria

principale

SATA II

LAN

Socket FM1

Processori AMD A-Series / E2-Series /

Athlon II / Sempron

AMD A55

ITE 8772E

Fo rn isce le f unzionalit à legacy Su per

I/O usate più comunemente.

Interfaccia LPC (Low Pin Count)

Allo ggi D IM M DD R3 x 2

Capacità massima della memoria 16GB

Ciascun DIMM supporta DDR3

512MB/1GB/2GB/4GB/8GB

Co ntroller S er ia l ATA int eg rat o

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

L’architett ur a AMD 64 ab ilit a la co mputaz io ne 32

e 64 bit

(Watt massimo: 100W)

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Co ntroller v elo c ità ven to lina

Funzione "Smart Guardian" di ITE

Modulo di memoria DDR3 a canale doppio

Supporto di DDR3 800/1066/1333/1600/1866

DIMM registrati e DIMM ECC non sono supportati

Velocità di trasferimento dei dati fino a 3 Gb/s.

Co mpatibile specifiche S ATA Versio ne 2.0

Supporto RAID 0,1,10

Negoziazione automatica 10 / 100 Mb/s

Negoziazione automatica 10 / 100 / 1000 Mb/s

Codec

audio

Allo ggi

Connettori

su scheda

ALC662

Uscita audio 5.1 canali

Supporto audio High-Definition (HD)

Alloggio PCI Express Gen2 x16 x1

Alloggio PCI Express x1 x1

Connettore SATA x4 Ciascun connettore supporta 1 unità SATA

Co nnett ore p annello frontale x1 S uppo rt a i s ervizi de l pannel lo fro ntale

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

Alimentazione ventolina CPU (con funzione Smart

Co llet tore ven tolina C PU x1

Fan)

Co llet tore ven tolina sistem a x1 A liment az ione vent olina d i sist ema

Co llet tore can ce llaz ione C MOS x 1

Page 37

SPECIFICA

A55MLC2/A55MLV2/A55MGC

I/O

pannello

posteriore

Dimension

i scheda

Sistemi

operativi

supportati

Connettore USB2.0 x2

Porta seriale x1

Connetto re alimentazione x1

(24 pin)

Connetto re alimentazione x1

(4pin)

Tastiera / Mouse PS/2 x1

Porta VGA x1

Porta LAN x1

Porta USB 2.0 x4

Connettore audio x3

175 mm (larghezza) x 226 mm

(altez za)

Windows XP / Vista / 7

Ciascun connettore supporta 2 porte USB2.0

pannello frontale

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo senza preavviso.

Page 38

Motherboard Manual

SPANISH

Especificación

Conector FM1

CPU

Conjunto

de chips

Súper E/S

Memoria

principal

SATA II Controlador ATA Serie Integrado

Red Local

Proc esadores AMD A-Series / E2-Ser ies /

Athlon II / Sempron

AMD A55

ITE 8772E

Le ofrece las funcionalidades heredadas

de uso más común Súper E/S.

Interfaz de cuenta Low Pin

Ranuras DIMM DDR3 x 2

Capacidad máxima de memoria de 16GB

Cada DIMM admite DDR de

512MB/1GB/2GB/4GB/8GB

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

La arquitectura AMD 64 permite el procesado de 32 y

64 bits

(Vatio máximo: 100W)

In ic iat ivas d e contro l d e en torno ,

Monitor hardware

Controlador de velocidad de ventilador

Función "Guardia inteligente" de ITE

Módulo de memoria DDR3 de canal Doble

Admite DDR3 de 800/1066/1333/1600/1866

No admite DIMM registrados o DIMM compatibles con

ECC

Tasas de transferencia de hasta 3 Gb/s.

Co mpat ib le co n la versión SATA 2 .0

Admite RAID 0,1,10

Negociación de 10 / 100 Mb/s

Negociación de 10 / 100 / 1000 Mb/s

Códecs de

sonido

Ranuras

Conectore

s en placa

ALC662

Ranura PCI Express Gen2 x16 X1

Ranura PCI Express x1 X1

Conector SATA X4 Cada conector soporta 1 dispositivos SATA

Conector de panel frontal X1 So porta ins tala cion es en e l p anel fr ontal

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con

Cabecera de ventilador de sistema X1 Fuente de alimentación de ventilador de sistema

Salida de sonido de 5.1 canales

Soporte de sonido de Alta Definición

función Smart Fan)

Page 39

A55MLC2/A55MLV2/A55MGC

Especificación

Cabecera de borrado de CMOS X1

Conector USB2.0 X2 Cada conector soporta 2 puertos USB2.0 frontales

Puert o s erie X1

Panel

trasero de

E/S

Ta ma ñ o d e

la placa

Soporte de

sistema

operativo

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1

(4patillas)

Teclado / Ratón PS/2 X1

Puert o VGA X1

Puerto de red local X1

Puert o US B2.0 X4

Conector de sonido X3

175 mm. (A) X 226 mm. (H)

Windows XP / Vista / 7

Biostar se reserva el derecho de añadir o retirar el

soporte de cualquier SO con o sin aviso previo.

Page 40

Motherboard Manual

PORTUGUESE

ESPECIFICAÇÕES

Socket FM1

CPU

Chipset AMD A55

Especificaç

ão Super

I/O

Memória

principal

SATA II Controlador Serial ATA integrado

Processadores AMD A-Series / E2-Series

/ Athlon II / Sempron

ITE 8772E

Proporciona as funcionalidades mais

utilizadas em termos da especificação

Super I/O.

Interface LPC (Low Pin Count).

Ranhuras DIMM DDR3 x 2

Capac idade máx ima de memór ia: 16GB

Cada módulo DIMM suporta uma

memória DDR3 de 512 MB/

1GB/2GB/4GB/8GB

32 e 64 bits

(Watt máx imo: 100W)

suportados

A arquitectur a A MD 64 per mite uma co mputação de

In ic iat ivas p ar a contr o lo do amb iente

Monitorização do hardware

Controlador da velocidade da ventoinha

Função "Smart Gu ard ian" da ITE

Módulo de memória DDR3 de canal duplo

Suporta módulos DDR3 800/1066/1333/1600/1866

Os módulos DIMM registados e os DIMM ECC não são

Velocidades de transmissão de dados até 3 Gb/s.

Compatibilidad e co m a especificação SATA vers ão 2.0

Suporta as funções RA ID 0,1,10

LAN

Codec de

som

Ranhuras

Conectore

s na placa

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

ALC662

Ranhura PCI Express Gen2 x16 x1

Ranhura PCI Express x1 x1

Conector SATA x4 Cada conector suporta 1 dispositivo SATA

Conector do painel frontal x1 Para suporte de várias funções no painel frontal

Conecto r de áud io front al x 1 Suporta a fun ção de áudio no painel f rontal

Conector da ventoinha da CPU x1

Auto negociação de 10 / 100 Mb/s

Auto negociação de 10 / 100 / 1000 Mb/s

Saída de áudio de 5.1 canais

Suporta a especificação High-Definition Audio

Alimentação da ventoinha da CPU (com a função

Smart Fan)

Page 41

A55MLC2/A55MLV2/A55MGC

ESPECIFICAÇÕES

Conector da ventoinha do s istema x1 Alimentação da ventoinha do sistema

Conector para limpeza do CMOS x1

Entradas /S

aídas no

painel

traseiro

Tamanho

da placa

Sistemas

operativos

suportados

Conector USB2.0 x2

Porta série x1

Conector de alimentação x1

(24 pinos)

Conector de alimentação x1

(4 p inos )

Teclado / Rato PS /2 x 1

Porta VGA x1

Porta LAN x1

Porta USB 2.0 x4

Tomada de áudio x3

175 mm (L) X 226 mm (A)

Windows XP / Vista / 7

Cada conector suporta 2 portas USB2.0 no painel

frontal

A Biostar reserva-se o direito de adicionar ou remover

suporte para qualquer sistema operativo com ou sem

av iso p révio .

Page 42

Motherboard Manual

POLISH

SPEC

Socket FM1

Procesor

Chipset AMD A55

Pamięć

główna

Super I/O

SATA II Zintegrowany kontroler Serial ATA

LAN

AMD A-Series / E2-Series / Athlon II /

Sempron Procesory

Gniazda DDR3 DIMM x 2

Maks. wielko ść pamięci 16GB

Każde gniazdo DIMM obs ługuje moduły

512MB/1GB/2GB/4GB/8GB DDR3

ITE 8772E

Zapewnia najbardziej powszechne

funkcje Super I/O.

Interfejs Low Pin Count

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

bitowe

Architektura AMD 64 umożliwia przetwarzanie 32 i 64

(Maksymalny Watt: 100W)

Mod uł pamięci DDR3 z trybem podwójnego kanału

Obsługa DDR3 800/1066/1333/1600/1866

Brak obsługi Registered DIMM oraz ECC DIMM

Funkcje kontroli warunków pracy,

Mon itor H/W

Kontroler prędkości wentylatora

Funkcja ITE "Smart Gu ard ian"

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2. 0

Obsługa RAID 0,1,10

10/100 Mb/s z automatyczną negocjacją szybkości

10/100/1000Mb/s z automatyczną negocjacją sz ybkości

Kodek

dźwiękowy

Gniazda

Złącza

wbud owan e

ALC662

5.1 kanałowe wyjście audio

Obsługa High -Def initio n Audio

Gniazdo PCI Express Gen2 x16 x1

Gniazdo PCI Express x1 x1

Złącze SATA x 4 Każde złącze obsługuje 1 urządzenie SATA

Złącze panela przedniego x1 Obsługa elementów panela przedniego

Przednie złącze aud io x1 Obsługa funkcji audio na panelu przednim

Złącze główko we wentylato ra

Zasilanie wentylatora procesora (z funkcją Smart Fan)

procesora x1

Złącze główko we wentylato ra

Zasilanie wentylatora systemowego

systemowego x1

Page 43

SPEC

Złącze główkowe kasowan ia CMOS x1

A55MLC2/A55MLV2/A55MGC

Back Panel

I/O

Wymiary

płyty

Obsluga

systemu

operacyjne

Złącze USB2.0 x 2

Port szeregowy x1

Złącze zasilania (24 pinowe) x1

Złącze zas ilania (4 p inowe) x1

Klaw iatura / Mysz PS/2 x1

Port VGA x1

Port LAN x 1

Port USB2.0 x4

Gniazdo audio x3

175 mm (S) X 226 mm (W)

Windows XP / Vista / 7

Każde złącze obs ługuje 2 porty USB2.0 na panelu

przednim

Biostar zastrzega sobie prawo dodawania lub

odwoływania obsług i dowo lnego s ystemu operac yjnego

bez powiadomienia.

Page 44

Motherboard Manual

RUSSIAN

СПЕЦ

CPU

(центральн

ый

процессор)

Набо р

микросхем

Основная

память

Super I/O

SATA II

Гнездо FM1

Процессоры AMD A-Series / E2-Series /

Athlon II / Sempron

AMD A55

Слоты DDR3 DIMM x 2

Максимальная ёмкость памяти 16ГБ

Каждый модуль DIMM поддерживает

512МБ /1ГБ/2ГБ/4ГБ/8ГБ DDR3

ITE 8772E

Обеспечивает наиболее используемые

действующие фун кц иональ ны е

возможности Super I/O.

Интерфейс с низким количеством

выводов

Встроенное последова тельное устройство

упра влени я ATA

Арх итектур а A MD 64 разрешать обработка

данных на 32 и 64 бит

(Максимал ьн ый ватт: 100W)

Мод ул ь памяти с двухкан альн ым режимом DDR3

Поддержка DDR3 800/1066/1333/1600/1866

Не поддерживает зарегистрированные модули

DIMM and ECC DIMM

Инициативы по охране окружающей среды,

Аппаратный монитор

Регул ятор скорости

Функци я ITE "Smart Guardian "

(Интеллектуальная защита)

скорость передачи данных до 3 гигабит/с.

Соответствие специ фикации SATA версия 2.0

Поддержка RAID 0,1,10

Локальна

я сеть

Звуко вой

кодек

Слоты

Встроенн

ый разъём

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

ALC662

Слот PCI Express Gen2 x16 x1

Слот PCI Express x1 x1

Разъ ём SATA x4

Разъ ём на лицевой панели x1 Поддержка устройс тв на лицевой панели

Автоматическо е со гласование 10/ 100 Мб /с

Автоматическо е сог ласовани е 10 / 100 1000 Мб/с

Звуко вая поддержка Hig h-Def in ition

5.1канальный звуковой выход

Каждый разъём поддерживает 1 устройство

SATA

Page 45

СПЕЦ

A55MLC2/A55MLV2/A55MGC

Задняя

панель

средств

ввода-выв

ода

Входной звуковой разъём x1

Контактирующее приспособление

вентил ятора центрального процессора x1

Контактирующее приспособление

вентил ятора системы x1

Открытое контактирующее

приспособление CMOS x1

USB2.0-разъём x2

Последовател ьны й порт x1

Разъ ем питания (24 выво д) x1

Разъ ем питания (4 вы вод) x1

Клавиатура / Мышь PS /2 x1

Пор т VGA x1

Пор т LAN x1

USB2.0-порт x4

Гнездо для подключени я

наушников x3

Поддержка звуко вых функций на лицевой

панели

Источник питания для вентилятор а

центрального процессора (с фун кц ией

интеллектуального вентилятора)

Источник питания для вентилятор а системы

Каждый разъём поддерживает 2 USB2.0-порта

на лицевой панели

Разм ер

панели

Поддержк

а OS

175 мм (Ш) X 226 мм (В)

Biostar сохраняет за собой право добавлять или

Windows XP / Vista / 7

удаля ть средства обеспечения для OS с или без

предварительного уведомления.

Page 46

Motherboard Manual

ARABIC

تﺎﻔﺻاﻮﻤﻟا

ﻦﻜﻤﺗ ﺔﻴﻨﻘ ﺗ AMD 64 ءاﺮﺝإ تﺎﻴﻠﻤﻌﻟا ﺔﻴﺏﻮﺳﺎﺤﻟا ﺔﻋﺮﺴﺏ 32 و64 ﺖﺏ

(طاو ىﻮﺼﻗ: 100و)

ةﺪﺣو ةﺮآاذ DDR3 ﺔﺝودﺰﻡ ﻘﻟاةﺎﻨ

ﻢﻋﺪﺗ ةﺮآاﺬﻟا ﻦﻡ عﻮﻥ DDR3 تﺎﻌﺳ

800/1066/1333/1600/1866 ﺎﺠﻴﻡ ﺖﻳﺎﺏ

ﻻ ﻋﺪﺗﻢ ﻖﺋﺎﻗر ةﺮآاﺬﻟا DIMM ﻚﻠﺗو ﻲﺘﻟ ا ﻻ ﻖﻓاﻮﺘﺗ ﻊﻡ ECC

ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:

ﺐﻗاﺮﻡ ﺔﻓﺮﻌﻤﻟ ﺔﻟ ﺎﺣ ةﺰﻬﺝﻷا

ﺐﻗاﺮﻡ ﻲﻓ ﺔﻋﺮﺳ ﺔﺣوﺮﻤﻟا

ﺔﻔﻴﻇو"S mart Gu ard ian" ﻦﻣ ITE

ﺔﻘﺏﺎﻄﻡ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 2.0

ﺔﻴﻨﻘ ﺕ ﻢﻋﺪﺕRAID 0,1,10

ضوﺎﻔﺗ ﻲﺋ ﺎﻘﻠﺗ 10/100 ﺎﺠﻴﻡ ﺖﻳﺎﺏ /ﺔﻴﻥﺎﺙ

ضوﺎﻔﺗ ﻲﺋ ﺎﻘﻠﺗ 10/100/1000 ﺎﺠﻴﻡ ﺖﻳﺎﺏ /ﺔﻴﻥﺎﺙ

تﺎﺠﻟﺎﻌﻣAMD A-Series / E2-Series / Athlon II /

ﻢﻋﺪﺗ ﻞآ ﺔﺤﺘﻓ DIMM ﻢﻋﺪﺗ ةﺮآاذ ﻦﻡ عﻮﻥ DDR3 ﺔﻌﺳ /512

ITE 8772E

ﺮﻓﻮﺗ ﺔﻔ ﻴﻇو Super I/O ﺮﺜآﻷا ًﺎﻡ ا ﺪ ﺨﺘﺳا.

ﺕﻢﻋﺪ ﺔﻴ ﻨﻘﺕ Low Pin Count Interface

ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺏ ﻞﺼﺗ ﻰﻟإ 6 ﺖﺏﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

ﺲﺒﻘﻡ FM1

ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا

ﺔﻳﺰآﺮﻤﻟا

Sempron

ﺔﻋﻮﻤﺠﻡ ﺢﺋاﺮﺸﻟا AMD A55

ﺔﺤﺘﻓDDR3 DIM M دﺪﻋ2

ﺔﻌﺳ ةﺮآاذ ىﻮﺼﻗ 16 ﺎﺠﻴﺝ ﺖﻳﺎﺏ

ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا

ﺎﺠﻴﻡ ﺖﻳﺎﺏ و1/ و2/ و4/ و8 ﺎﺠﻴﺝ ﺖﻳﺎﺏ

Super I/O

SATA II ﻢﻜﺤﺘﻡ Serial ATA ﻞﻡﺎﻜﺘﻡ

ﺔﻜﺒﺵ ﺔﻴﻠﺥاد

ﻢﻋﺪﺗ ﺔﻴﻨﻘﺗ تﻮﺼﻟا ﻲﻟﺎﻋ ﻒﻳﺮﻌﺘﻟا ﻦﻡ

5.1 تاﻮ ﻨﻗ جﺮﺨﻟ تﻮﺼﻟا

ﻢﻋﺪﻳ ﻞآ ﺬﻔﻨﻡ ﺪﺣاو ﻦﻡ ةﺰﻬﺝأ SATA

ﻢﻋﺪﻳ تاﺰﻴﻬﺠﺗ ﺔﺣ ﻮﻠﻟا ﺔﻴﻡﺎﻡﻷا

ﻢﻋﺪﻳ ﺔﻔ ﻴﻇو تﻮﺼﻟا ﺔﺣﻮﻠﻟﺎﺏ ﺔﻴﻡﺎﻡﻷا

ﻞﻴﺹﻮﺘﻟ ﺔﻗﺎﻄﻟا ﺔﺣ وﺮﻤﻟ ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا ﻊﻡ ﺔﻔﻴﻇو Smart Fan

ﻞﻴﺹﻮﺘﻟ ﺔﻗﺎﻄﻟا ﺔﺣ وﺮﻤﻟ مﺎﻈﻨﻟا

ﻚﻳدﻮآ تﻮﺼﻟا ALC662

ﺔﺤﺘﻓGen2 x16 PCI Express دﺪﻋ1

تﺎﺤﺘﻔﻟا

ﺔﺤﺘﻓ PCI Expres x1 ﺪﻋ1

ﺬﻔﻨﻣSATA دﺪﻋ4

ﺔﺡﻮﻠﻟا ﺬﻔﻨﻣﺔﻴﻣﺎﻣﻷا دﺪﻋ1

ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو ﺔﺡوﺮﻣ ﺔﻠﺹو دﺪﻋ1

ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄ ﺳ

ﺔﺣﻮﻠﻟا

مﺎﻈﻨﻟا ﺔﺡوﺮﻣ ﺔﻠﺹو دﺪﻋ1

ﺢﺴﻣ ﺔﻠﺹوCMOS دﺪﻋ1

ﺬﻔﻨﻣUSB2.0 دﺪﻋ2 ﻲﺘﺤﺘﻓ ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪیUSB2.0 ﺔ ﻴﻣﺎﻣﻷا ﺔﺡﻮﻠﻟﺎﺑ

Page 47

تﺎﻔﺻاﻮﻤﻟا

A55MLC2/A55MLV2/A55MGC

ﻲﻠﺴﻠﺴﺕ ﺬﻔﻨﻣ دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻣ)24سﻮﺑد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻣ)4ﺲﻴﺑﺎﺑد( دﺪﻋ1

ﺢﻴﺕﺎﻔﻣ ﺔﺡﻮﻟ / سوﺎﻣPS/2 دﺪﻋ1

ﺬﻓﺎﻨﻣVG A دﺪﻋ1

ﺬﻔﻨﻣ ﺔﻴﻠﺤﻣ لﺎﺼﺕا ﺔﻜﺒﺷ دﺪﻋ1

ﺬﻓﺎﻨﻣ2.0US B دﺪﻋ4

تﻮﺹ ﺲﺒﻘﻣ دﺪﻋ3

226 ﻢﻣ)ضﺮﻋ (X 175 ﻢﻣ)عﺎﻔﺕرا(

ﺬﻓﺎﻨﻡ ﻞﺥد/جﺮﺥ

ﺔﺣﻮﻠﻟا ﺔﻴﻔﻠﺨﻟا

ﻢﺠﺣ ﺔﺣﻮﻠﻟا

ﻆﻔﺘﺤﺗ Biostar ﺎﻬﻘﺤﺏ ﻲﻓ ﺔﻓ ﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻥ ﻞﻴﻐ ﺸﺗ رﺎﻄﺥﺈﺏ وأ نوﺪﺏ

رﺎﻄﺥإ.

ﻢﻋد ﺔﻤﻈﻥأ ﻞﻴﻐﺸﺘﻟا Windows XP / Vista / 7

Page 48

Motherboard Manual

JAPANESE

仕様

Socket FM1

CPU

チップセッ

ト

メインメモ

リ

Super I/O

SATA II 統合シリアルATA コントローラ

LAN

AMD A-Series / E2-Series / Athlon II /

Sempron プロセッサ

AMD A55

DDR3 DIMMスロット x 2

最大メモリ容量16GB

各DIMMは 512MB/1GB/2GB/4GB/8GB

DDR3をサポート

ITE 8772E

もっとも一般に使用されるレガシーSuper I/O機

能を採用しています。

低ピンカウントインターフェイス

RTL8105E (A55MLC2, A55MLV2)

RTL8111F (A55MGC)

AMD 64アーキテクチャでは、32ビットと64ビット計算

が可能です

(最高のワット : 100W)

デュアルチャンネルモードDDR3メモリモジュール

DDR3 800/1066/1333/1600/1866 をサポート

登録済みDIMMとECC DIMMはサポートされません

環境コントロールイニシアチブ、

H/Wモニター

ファン速度コントローラ/ モニター

ITE の「スマートガーディアン」機能

最高3 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠。

RAID 0,1,10 のサポート

10 / 100 Mb/秒のオートネゴシエーション

10 / 100 / 1000 Mb/秒のオートネゴシエーション

サウンド

Codec

スロット

オンボード

コネクタ

ALC662

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

PCI Express Gen2 x16スロット x1

PCI Express x1 スロット x1

SATAコネクタ x4 各コネクタは 1つのSATAデバイスをサポートします

フロントパネルコネクタ x1 フロントパネル機能をサポートします

フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします

CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載 )

システムファンヘッダ x1 システムファン電源装置

CMOSクリアヘッダ x1

Page 49

仕様

A55MLC2/A55MLV2/A55MGC

USB2.0コネクタ x2

シリアルポート x1

電源コネクタ (24 ピン) x1

電源コネクタ (4ピン) x1

PS/2キーボード / マウス x1

VGAポート x1

背面パネル

LANポート x1

I/O

USB2.0ポート x4

オーディオジャック x3

ボードサイ

175 mm (幅) X 226 mm (高さ)

ズ

OSサポート Windows XP / Vista / 7

各コネクタは 2つのフロントパネル USB2.0ポートをサポ

ートします

Biostarは事前のサポートなしにOSサポートを追加また

は削除する権利を留保します。

2012/05/23