Binatone TTGO121 User Manual

TTGO121 | Powered Lighter Socket Mount for TomTom GO GPS

Package Contents:

(1) CM097-2 - 12V / Lighter socket mount with power outlet (1) APTTGO520 - Adapter plate for TomTom GO 520, 530, 720, 730, 920, 920T, and 930 models

TomTom Device Compatibility:

APTTGO520 Adapter plate for TomTo m GO

- For use with TomTom GO - 520, 530, 720, 730, 920, 920T, and 930 models

TomTom, ONE, and GO are product names, trademarks, or registered trademarks of TomTom International BV. Arkon Resources, Inc. is not a liated with TomTom International BV.

Mount Installation Instructions

Step 1.

Insert the DC Power plug (A) completely into the vehicle’s

12V / lighter socket.

Step 2.

Adjust the angle of the pedestal arm and rotatable dual T head by tightening the wing nuts (B) to the desired

placement angle.

CM097-2 Lighter socket mount

12 V Powering

Outlet Socket

Do not place mount in or near an air bag deployment zone

or where it will obstruct view of the road.

TomTom GO Adapter Plate Installation

Step 1. Attach the adapter plate by sliding it up into the slot on

the back of the TomTom GO 520, 530, 720, 730, 920, 920T, or 930 device as shown below.

TomTom GO Device Attachment

Step 1. Attach the device cradle to the pedestal by inserting

the dual T-Tabs of the pedestal (C) into the T-slots of the adapter plate (D).

Safety Precautions

Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or air bag deployment.

Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.

The Mobile Mounting Specialists™

Consumer Hotline:

USA (800) 841-0884 INT’L (626) 254-9005

Monday - Friday 9 am - 5 pm, PST

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in Taiwan