Page 1
Beyond Screen Limited
www.BeyondScreen.com
Beyond Tablet and
Beyond Curriculum
User Manual
Page 2
1 2
Getting Started
Step 1 Step 2
Step 3 Step 4
Step 1: Plug in the power cord provided to power connection.
Step 2: Press and hold the power switch until you see the red LED light is
turned on.
Step 3: Place a game map on Beyond Tablet and the game will start
automatically.
Step 4: Depending on the game, you will be asked to either touch the
game map, game pieces or cards to start playing.
Step 5: Press and hold the power switch for more than three seconds to
turn it off.
Introduction
Features, Functions and Controls
Packaging Details
ID cards
Beyond Tablet
AC Power Adapter
(The original power adapter must be used)
AC Power Cord
speaker
speaker
speaker
microphone
power switch
volume control
headphone jack (CTIA system)
power connection
speaker
Page 3
3 4
Technical and Physical Specifications
Audio Formats
Network Connections
Power Adapter
Input methods
Model
Device type
Weight
Physical dimensions
MP3, WMA, MP2, OGG, AAC, MP4, FLAC, APE, 3GP, WAV
Bluetooth, WIFI
Input: AC100-240V, 50-60Hz , Output: DC12V 2A
Touch, gestures and object (game pieces and
game cards) identification
MEDT1701
Smart board
2.9 kg (6.4 lb)
L 435.5 mm* W 435.5 mm* H 24 mm
(L 17.15 in * W 17.15 in * H 0.94 in)
General Parameters
No. Item Parameters
1
2
3
4
Rated Power
Brightness Range
Brightness Discrimination
Grade
Start-up Time
Unit
W
LUX
Grade
Second
< 24
SD2011S-A/A：50
SD2011S-A/D：100
≥ 8
≤ 45
Lighting
Light Color
RGB LED and white LED
Monochrome and polychrome
Technical and Physical Specifications
Touch Panel
Speakers
18x18 capacitive touch points array
4Ω/2W high fidelity trumpet x 4
Microphone Built-in Microphone
Input Voltage/Current
Output Voltage/Current
Maximum Output Power
100V-240V，50/60Hz，1.8A
12V/2A
24w
Enclosure Material PC/ABS
Case Color Warm White + Cyan Pantone 331C (Color Code)
Safety Precautions
Danger
Warning
1. Do not expose this product to water droplets or water splashes. Do not
place liquid-filled items such as a vase on the product case.
2. To avoid fire hazards, do not place potentially flammable items, such as lit
candles, on the case.
Please do not disassemble any part of the product by yourself to avoid
damaging the product, causing harm to the human body and invalidating your
product warranty.
Page 4
5 6
1) When the power cord is damaged or worn out;
2) When liquid is spilled onto or into the product;
3) When the product is subjected to rain or water;
4) After the product falls, or if the case is damaged;
5) The performance of the product changes significantly.
3. If the product emits strange noise, smoke or smell, unplug it and contact the
customer service immediately.
4. This product must be used with the included AC Power Adapter. Use of any
other power adapter may result in malfunction of the product, and may result
in safety hazard.
Attention
1. Please read all instructions and keep this manual for future use.
2. Please do not put this product in standby mode during thunder, or have it on
idle for prolonged periods of time. Please switch off the power after use.
3. Please do not use this product near water, such as bathtubs, dishwashers,
kitchen sinks, pools, wet basements, and other places that are or potentially
could be near water.
4. Do not place this product near heat sources, such as the exhaust for air
conditioning unit.
5. Be careful not to clean the surface of the product with a hard or sharp
object. Make sure to unplug Beyond Tablet before cleaning it. Do not use
organic solvents. Clean the product with a soft, dry cloth.
6. Do not place sharp or heavy objects on the surface of this product.
7. Do not step on or hit the product.
8. Place the power cord properly in storage to prevent damaging the wires and
threatening the safety of life and property.
9. In the following cases, the power should be switched off, unplugged from
the power outlet and be decommissioned for maintenance:
10. Check the wire, plug, case and other parts with regular intervals. Stop
using the product if it is damaged until adequate maintenance or repairs have
been conducted.
11. The Power Adapter is not a toy.
12. This product cannot be connected to more than the recommended number
of power outlets.
13. Take care of our living environment, please dispose of the waste packaging
properly.
14. Not suitable for children under three years old.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
This device is solely intended for tabletop use.
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a different circuit from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Note
Page 5
7 8
Connect to Beyond Tablet
1. While the network connection mode is active, and Beyond Tablet is ready to
connect to the Internet, open "Settings" on your smart phone.
2. Click on the WLAN or Wi-Fi setup.
3. Choose the "Beyond-setup" network.
4. After you have successfully connected to Beyond-setup, the Beyond Tablet
network connection page will automatically pop up.
However, if the connection page has failed to pop up, and you have confirmed
that Beyond Tablet is still in network connection mode, then, open a browser
window and enter:
http://192.168.43.1:8080
to open the Beyond Tablet network connection page manually.
Beyond Tablet Network Settings
Choose the wireless network that you wish Beyond Tablet to connect to.
Enter then corresponding password, and click on the "connect" button. The
connection process might take up to 15 seconds so please be patient.
If no password has been set for the wireless network that you wish Beyond
Tablet to connect to, please simply press the "confirmation" button to connect.
If no WIFI is active, please long press the three flashing points to exit the
network connection mode, and then long press the three flashing points again
to re-enter the network connection mode, so that Beyond Tablet will search the
wireless network again.
Successful When the peripheral LED lights on Beyond Tablet turn green,
the network signal indicators will all be lit up.
WLAN
Connect Beyond Tablet to a wireless network via a smart phone, to download
system upgrades and Beyond Curriculum upgrades, and to upload game play
statistics.
Instructions on
Network Connection
1. Make sure no game map or game pieces have been placed on Beyond
Tablet；
2. Long press the three flashing points of the network signal indicators in the
upper right corner of Beyond Tablet. It will tell you that Beyond Tablet is now
ready to connect to a network via a smart phone. The LED lights along the
border will turn yellow to confirm that you are in the network connection mode.
Long press the three flashing points again to exit the network connection
mode. Beyond Tablet will inform you that the WIFI connection mode is no
longer active.
Procedure
Network signal indicators
Not connected to a wireless network
Waiting for network connection
Page 6
9 10
Failed When the peripheral LED lights on Beyond Tablet turn red,
re-connect your smart phone to Beyond-setup for a second try.
Attention:
In some cases, although free WIFI services are provided, web
authentication may required, which means that users have to connect to
the WIFI through web browsers. This kind of WIFI does not support
connection to Beyond Tablet currently.
Successful Failed
The network signal indicators will be all lit up when Beyond Tablet has
successfully connected to the wireless network. Long press the three flashing
points again to change the wireless network that you wish Beyond Tablet to be
connected to.
Connected to wireless network
Instructions for update of Beyond Tablet system and products
When Beyond Tablet is connected to the internet, the update voice prompt will
be played if there are updates available, shown as below :
If you wish to update, press the confirm check mark. Beyond Tablet will
automatically download the latest update from the server. During the
downloading process, Beyond Tablet will be looked like below:
Please wait until Beyond Tablet has successfully restarted and a voice prompt
will inform that a successful update has been completed.
You may now proceed to use Beyond Tablet as usual, for example, starting a
new game, or turning it off.
Attention:
Beyond Tablet MUST NOT be turned off during the entire updating
process, UNTIL Beyond Tablet has successfully restarted, and the voice
prompt announcing that a successful update has been completed. Please
also make sure that Beyond Tablet is not accidentally turned off during the
entire updating process.
If an update has been failed, a voice prompt announcing the failure will
be provided by Beyond Tablet. But please be noted that Beyond Tablet
will not be automatically restarted as a result of the failure. Instead, the
updated will be re-downloaded till Beyond Tablet is started next time.
If, for any reason, the power of Beyond Tablet is switched off before the
updating process has been successfully completed, Beyond Tablet will
become unusable. Please contact customer service for help, if such an
event has occurred.
Download progress
Download speed
Loading...