
DW24XV
DISHWASHER 24” STAINLESS PANEL
XV MODEL
PRODUCT FEATURES
Style
Interior finish
User interface
Sound insulation
Stainless steel panel installed
Stainless steel tub
Concealed electronic touch interface
48 db(A)
Extra-quiet performance 48 dB(A)
Dual pump system with food disposer and triple-stage filter
ensure maximum removal of dirt residues from washing
water
6 washing programs, 4 washing options and turbo
drying ensure a customizable and always effective wash
program
Sani-Boost option elevates washing temperature to 158F
for perfect and sanitized cleaning
Energy Star compliant
Choose Professional, Master or Heritage Series handle kit
to match your other Bertazzoni kitchen appliances
Racks
Place settings
Wash cycles
Wash options
Drying system
Filter
Food disposer
Sprayer arms
Lighting
TECHNICAL SPECIFICATIONS
Voltage, Frequency, Amps
EnergyStar
Power connection
Water connection
Certification
Warranty
ACCESSORIES
PROHK24DW
MASHK24DW
HERHK24DW
2 with height-adjustable middle rack
14
6 – Normal, Heavy, Auto, Quick, Rinse,
ECO
4 – Extra Dry, Sani Boost, Hi Temp, Delay
Start
Turbo drying
Triple-stage filter
Yes
3
No
120V 60Hz - 8.5 Amps 975W
Yes 249 kWh/yr
Direct wiring, no cord
Min. 3/8” copper pipe with accessible
shut-off valve
CSA
2 years parts & labor
Handle kit 24" dishwasher XV/XT
PROFESSIONAL SERIES
Handle kit 24" dishwasher XV/XT
MASTER SERIES
Handle kit 24" dishwasher XV/XT
HERITAGE SERIES
DW24XV+PROHK24DW DW24XV+HERH K24DWDW24XV+MASHK24DW
www.bertazzoni.com

DW24XV
DISHWASHER 24” STAINLESS PANEL
XV MODEL
SIDE FRONT BACK
WATER LINES:
Install water lines on either side, rear, or
floor of shaded area. Line may pass through
same hole as electrical cable and drain hose.
If power cord with plug is used, water line
MUST NOT pass through power cord hole.
DRAIN REQUIREMENTS:
Follow local codes & ordinances. Drain hose cannot exceed 10’ distance
to drain line.
ELECTRICAL LINES
Install electrical line entry on either side, rear,
or floor of shaded area. Must be connected to
individual properly grounded circuit (with 15 –
20 A circuit breaker). Line must have 2 wires
with a ground
AIR GAP / HIGH DRAIN LOOP:
Install a waste line with an air gap (not supplied) or high drain loop to
prevent backflow. High drain loop must be min 32” above floor. Air gap
must be used if waste tee or disposer connection is less than 18” above
floor.
www.bertazzoni.com