Joybee 130 (DA130)
Digital Audio Player
User’s Manual
Welcome
Copyright
All rights reserved. No part of this publication may be reproduced, transmitted, recorded,
stored in a retrieval system, or translated into any language or computer language, in any form
or by any means, electronic, mechanical, recording, photocopying, or otherwise, without the
prior permission of the BenQ Corporation.
Disclaimer
The BenQ Corporation shall make no warranty or representation, either expressed or implied,
with respect to the quality, accuracy or fitness for any particular purpose of this document.
The information in this document is subject to change without notice. The content of this
manual has been checked and proofread prior to publication.
*Windows is the registered trademark of Microsoft Corporation. All trademarks or product
names appearing in this manual are registered property of their respective owners.
Important Information
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4.Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority
to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Accessories precautions
Batteries:
Alkaline batteries are recyclable. You can help to preserve our environment by returning your
used rechargeable batteries to the authorized collection and recycling outlet. For detailed locations of the recycle outlets in each country, please call your environment protection agency for
detail.
The battery pack is not waterproof. Do not use the battery outside if it is snowing or raining.
Do not get dirt, sand, liquids, or other foreign matter on the terminals.
Do not touch the plug terminals with metal objects.
Do not disassemble, remodel, heat or throw into fire.
War nin gs
To reduce the risk of fire, electric shock or product damage, do not expose this apparatus to
rain, moisture, dripping or splashing and that no objects filled with liquids shall be placed on
the apparatus.
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure. Do not open covers and do not repair yourself.
Refer servicing to qualified personnel.
<Memo>
Table of Contents
Introducing the BenQ Joybee 130 Digital Audio Player ............................. 1
Service Information .....................................................................................46
Introducing the BenQ Joybee 130 Digital Audio
Player
Introduction
Thank you for purchasing the BenQ Joybee 130 Digital Audio Player!
The BenQ Joybee 130 Digital Audio Player offers high quality audio playback and voice
recording functions at low power consumption.
Joybee 130 supports MP3, WMA, and WAV music formats for your listening pleasure.
Moreover, the seven built-in EQ modes of Joybee 130 allow you to enjoy music at the best
sound quality. In addition to being a MP3 player, Joybee 130 also functions as a FM radio
and an audio recorder.
The FM radio function enables you to preset up to 12 radio stations for quick and easy
listening. The recording function enables you to record your voice from the built-in
microphone, from the radio receiver or from the MP3 player.
Joybee 130 not only enriches your musical life but also allows you to carry your data
everywhere. Its convenient driver-free plug and play function allows you to use it as a USB
flash disk on Windows 98SE/2000/ME/XP MAC OS 10.3.3 and future version.
Joybee 130 comes equipped with a software suite for additional convenience. The QMusic
software enables you to convert and transfer music from your PC or audio CDs to
Joybee 130.
If the operation system in your PC is Windows 98SE, please install the driver so that
the PC will recognize Joybee 130 as flash disk.
Introducing the BenQ Joybee 130 Digital Audio Player
1
Package Contents
Check the contents of your Joybee 130 digital audio Player package. Contact your dealer
immediately if any accessories are missing or appear damaged.
Joybee 130
CD-ROM
1. BenQ Joybee 130 Digital Audio Player
2. Earphones
3. USB Cable
4. An AAA Alkaline Battery (strongly recommanded)
5. CD-ROM(QMusic/ Driver etc.)
6. User’s Manual
7. Warranty Card
Introducing the BenQ Joybee 130 Digital Audio Player
2
AAA Battery
User’s ManualWarranty card
USB Cable
Earphones
System Requirements
Your PC must comply with the following requirements in order to enable data transfer to
your player:
•OS: Microsoft Windows 98SE/2000/ME/XP (QMusic supports Windows 2000/XP)
•CPU: Pentium 200 MHz or faster
•I/O port: USB (1.1 or higher)
•Device: CD-ROM
•Hard disk space: 40 MB (minimum)
•System memory: 32 MB (minimum)
Please read this manual carefully to find detailed descriptions and instructions of
every function of the Joybee 130 in order to use these convenient functions and enjoy
high quality music with the Joybee 130.
Introducing the BenQ Joybee 130 Digital Audio Player
3
Description and Funciton of BenQ Joybee 130 Digital
Audio Player
The following section describes the various components of Joybee 130.
A Tour of Joybee 130
(6)
-
(5)
(4)
(3)
(2)
(1)
(10)
(11)
(12)
(13)
(9)
(8)
(7)
130 MP3 PLAYER
Joybee
Introducing the BenQ Joybee 130 Digital Audio Player
4
ItemDescriptionFunction
(1) Battery coverSwitch and open the battery container.
(2) USB portConnects the Joybee 130 to a PC.
(3) SRS• Press to switch between modes of SRS 3-D , EQ, SRS and
EQ mode, or non-SRS-EQ while playing music.
• Press to show the preset FM stations.
(4) Mode• Press to switch modes.
• Press to enter the Main Menu.
• Press and hold for 2 seconds to display options for the current mode.
• Press to cancel current setting and go back to the previous
level in setup or playback mode.
(5) Power on/off jog
wheel
• Press down the jog wheel to turn on Joybee 130. After the
welcome note is displayed, Joybee 130 enters the last used
mode automatically (default is MP3/WMA playback). If
there are files on Joybee 130, the titles of these files are displayed on the screen.
• Press down and hold the jog wheel for about 4 seconds to
turn off the player.
(6) LCD displayDisplays player status and file information.
(7) MICHigh sensitivity built-in microphone for voice recording.
(8) Vo lum e c ontr ol • Press VOL – or VOL + to decrease or increase volume
respectively while listening to music or FM radio.
• Press and hold VOL – or VOL + to decrease or increase volume continuously.
Introducing the BenQ Joybee 130 Digital Audio Player
5
ItemDescriptionFunction
(9) Earphone jack Connects to earphones.
(10) Strap holeTo attach a strap to the device
(11) A-B repeat/
Lock
• Follow this procedure to repeat a desired section during
audio playback.
i. Press once to set point A.
ii. Press again to set point B and the section from
point A to B repeats continuously.
iii. Press again to disable the repeat function.
• Press and hold for 2 seconds to lock or unlock the buttons.
(12) RecordPress to start recording. Press again to stop recording.
(13) SD/MMC card
To insert SD/MMC card as another source of data
slot
Introducing the BenQ Joybee 130 Digital Audio Player
6
LCD Display
The LCD screen displays information about the player mode and file information. The following table shows the icons displayed on the screen and their meanings.
ItemDescription
Indicates playback of an audio file.
Indicates playback has been paused.
Indicates playback has been stopped.
Indicates audio file being scanned in forward direction (Forward).
Indicates audio file is being scanned in reverse direction (Rewind).
Indicates in FM mode.
Indicates that recording has been paused.
Indicates repeat mode is disabled.
Indicates single track repeat mode.
Indicates repeat mode for all files.
Indicates random repeat mode, and all tracks are played randomly.
Indicates shuffle repeat mode, and a random track is repeated.
Indicates the starting point of A-B segment.
Indicates A-B repeat mode.
Indicates battery status.
Indicates SD/MMC card is in.
Indicates buttons are locked.
Introducing the BenQ Joybee 130 Digital Audio Player
7
Getting Started
Changing the Battery
Joybee 130 uses one AAA regular or rechargeable Alkaline battery. One battery provides at
least 15 hours of power for Joybee 130. The battery icon on the screen will indicate the left
power of the battery.
8
Getting Started
Connecting Joybee 130 to a PC
Connect the Joybee 130 to your PC by using the USB cable provided.
When the Joybee 130 is successfully connected to the PC, there are three indications as
follows.
1. Two new icons JOYBEE 130 and Removable Disk appear in the My Computer window on your PC.
2. The LCD screen of the Joybee 130 also indicates that it is connected to the USB port
of the PC.
3. When you upload files to the player using the USB port, the LCD screen indicates
this using the data transfer icon.
• If the dialog box “Windows found new hardware” keeps appearing on the PC screen
after the connection, press Next or OK to close the dialog box.
• If your operation system is Windows 98SE, please install driver first, or your PC
won’t be able to recognize your Joybee 130 as a flash disk. You can find the driver in
Joybee 130 CD-ROM.
• Joybee 130 with SD/MMC card inserted are displayed on your PC at the same time. If
there are more than one disk shown as “Removable disk,” make sure you are transferring files to Joybee 130 or SD/MMC card.
• If the Joybee 130 is off when it is connected to the PC, it turns on automatically and
acts as a USB storage device. If the Joybee 130 is on when it is connected to the PC,
all functions are disabled and the player acts as a USB storage device.
Getting Started
9
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.