Bello PVS-4207 Owners manual

PVS-4207 Flat Panel Television Stand

ASSEMBLY INSTRUCTIONS

Patent No. 505,573
Italian Designed
A Product of China

REVJY06

FOR YOUR SAFETY, PLEASE FOLLOW THESE PRECAUTIONS:

! ALWAYS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE ASSEMBLED UNIT.

! BE CAREFUL WHEN MOVING THE ASSEMBLED FURNITURE AFTER THE GLASS SHELVES HAVE BEEN INSTALLED,

AND/OR WHEN THERE IS EQUIPMENT LOCATED ON THE FURNITURE AS THIS MAY CAUSE THE SHELVES TO
BECOME UNSECURED AND FALL.

! WHEN IN USE, THIS FURNITURE MUST BE PLACED ON A FLAT, SOLID AND LEVEL SURFACE.

! DO NOT LEAN ON THE TV WHEN IT IS ON THE TV STAND.

! DO NOT CLIMB OR STEP ON THE STAND.

! DO NOT BANG OR PLACE YOUR OWN WEIGHT ON THE GLASS SHELF.

! DO NOT PLACE ITEMS ON THE SHELVES WHICH EXCEED THE MAXIMUM WEIGHT LIMITS OF 125 LBS. FOR TOP SHELF

AND 50 LBS. FOR MIDDLE AND LOWER SHELVES

Assembly Instructions

NOTE: TWO PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS TABLE.

A. STAND the rear CMS®(Cable Management System) frame

B) upright so that it is resting on the floor. NOTE: The TOP

(
of the CMS
as shown in Fig. 1.

B. ALIGN the bottom shelf frame (D) with the bolt holes located

in the bottom sides of the CMS

sing four 35mm medium size screws (2) and the supplied

u
Allen key. DO NOT TIGHTEN FULLY.

C. ALIGN the middle shelf frame (C) with the bolt holes located

in the middle rear CMS frame (B), and working from the rear
of the stand, ATTACH using two 100mm long screws (3) and
the supplied Allen key. DO NOT TIGHTEN FULLY.

D. SLIDE the inserts that are located on the edges of the two

upright legs (E and F) into the open ends of the bottom shelf
frame (D) and the middle shelf frame (C) as shown in Fig. 2.
Attach each with two 16mm smaller size screws (7) by using
the supplied Allen key.

NOTE: The legs are in the proper position when the angled
inserts are at the bottom of the leg and facing forward as
indicated in Fig.2.

E. ALIGN the top shelf frame (A) with the bolt holes located in

the top rear CMS
in the rear bar are facing up and ATTACH with four middle
size 35mm bolts (2) using the supplied Allen key. FULLY
TIGHTEN THE BOLTS.

®

frame has two cut outs that should be facing up

®

frame (B) and ATTACH

®

frame (B) making certain the larger holes

Fig. 1

Fig. 2

F. NOW GO BACK AND FULLY TIGHTEN ALL BOLTS.

NOTE: MOVE the table to the location that it will occupy in
the room when fully assembled and in use, PRIOR to placing
the glass shelves.

G. APPLY four of the larger glass pads (5) to the front of the

TOP shelf frame, and two of the larger glass pads (5) to the
front of the middle shelf frame where indicated in Fig. 2.
APPLY the smaller glass pads (6) to the front and rear of the
bottom frame as shown in Fig. 2. CAREFULLY place the
bottom glass shelf (I) onto the bottom frame (D). The
curved edge of the glass should be facing forward.
NOTE: The bottom glass shelf is not as wide as the other
two glass shelves.

H. INSERT two plastic suction cups (4) into the holes in the

middle shelf frame (C) and push into place. CAREFULLY
CENTER AND PLACE the middle glass shelf (H) onto the
middle shelf frame and GENTLY push downward to create a
seal. The curved edge should be facing forward. NOTE: The
middle glass shelf is the deepest of the three shelves and the
one without the silver discs attached.

NOTE: The suction cups are only intended to limit the
movement of the middle shelf and allow easy shelf removal.
To release the seal, gently pull down on edge of the suction
cups.

I. PLACE two plastic caps (1) over the open top area of the top

shelf frame (A). CAREFULLY PLACE the top glass shelf (G),
the one with the silver discs, onto the top shelf frame with
the silver discs inserted into the holes at the rear of the top
frame and the curved edge of the glass facing toward the
front. SECURE the silver discs to the top shelf frame from
below with two of the 35mm (2) bolts using the supplied
Allen key. DO NOT OVERTIGHTEN.

Fig. 3

Warranty

One (1) Year Limited Warranty

All Bell’O International products are warranted, with the exception of glass, to the original purchaser at the time of
purchase and for a period of one (1) year thereafter. Glass is warranted to the original purchaser at the time of
purchase and for a period of thirty (30) days thereafter. Warranty is only valid in the United States of America.

In order to provide you with timely assistance, please thoroughly inspect your furniture for missing or defective parts
immediately after opening the carton. To receive replacement or missing part(s) under this warranty, go to our
website at www.bello.com or call our Customer Service Department at 1-888-235-7646. Please have the model
number and part number(s) for reference. You will also need your sales receipt or other proof of purchase.
Replacement part(s) will be shipped to you at no charge with Bell’O International assuming all shipping and handling
expense.

We warrant to you, the original purchaser, that our furniture and all of its parts and components are free of defects in
material or workmanship. "Defects", as used in this warranty, is defined as any imperfections that impair the use of
the furniture or product.

Our warranty is expressly limited to the replacement of furniture parts and components. For one (1) year after the
date of purchase, Bell’O International will replace any part described on the enclosed furniture parts list that is
defective in material or workmanship.

This warranty applies under conditions of normal use. Our furniture products are not intended for outdoor use. The
warranty does not cover: 1) defects caused by improper assembly or disassembly; 2) defects caused by shipping,
claims for damage during transit to you should be placed immediately by you to the transportation company;

3) defects occurring after purchase due to product modification, intentional damage, accident, misuse, abuse,
negligence or exposure to the elements; 4) cosmetic damage and 5) labor or assembly costs.

There are no warranties, express or implied, including without limitation merchantability or fitness for particular use,
except as (i) contained herein or (ii) required by applicable law in the state whose law governs (which shall be New
Jersey absent controlling law imposing the law of another state in lieu thereof as governing law). All warranties of
whatsoever derivation shall be limited to the term set forth above, unless otherwise required by applicable law.

Manufacturer’s employees or representatives’ … ORAL OR OTHER WRITTEN STATEMENTS DO NOT CONSTITUTE
WARRANTIES, shall not be relied upon by Buyer, and are not a part of the contract for sale or this limited warranty.

Except as provided herein, Bell’O International shall have no liability or responsibility to the purchaser or any other
person or entity with respect to any liability, loss or damage caused directly or indirectly by use of the product,
including, but not limited to, any incidental or consequential damages. Some states do not allow limitation on how
long an implied warranty can last or the exclusion of limitation of incidental or consequential damages, so the above
limitation and exclusion may not apply to you.

This warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

BELL'O INTERNATIONAL CORPORATION, 711 Ginesi Drive, Morganville, NJ 07751-1235

Phone: [phone] Fax: [phone] Web: www.bello.com E-mail: [e-mail]