Washing Machine |
User’s Manual |
WTC 6532 X0 |
EN BG |
Document Number= 2820524799_EN / 19-11-15.(8:13) |
This product was manufactured using the latest technology in environmentally friendly conditions.
1 Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.
1.1 General safety
•This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children must not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children of less than 3 years should be kept away unless continuously supervised.
•Never place the product on a carpet-covered floor. Otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.
•If the product has a failure, it should not be operated unless it is repaired by the Authorized Service Agent. There is the risk of electric shock!
•This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.
•Connect the product to a grounded outlet protected by a 16 A fuse. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•The water supply and draining hoses must be securely fastened and remain undamaged. Otherwise, there is the risk of water leakage.
•Never open the loading door or remove the filter while there is still water in the drum. Otherwise, risk of flooding and injury from hot water will occur.
•Do not force open the locked loading door. The loading door will be ready to open just a few minutes after the washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.
•Unplug the product when not in use.
•Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!
•Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
•Use detergents, softeners and supplements suitable for automatic washing machines only.
•Follow the instructions on the textile tags and on the detergent package.
•The product must be unplugged during installation, maintenance, cleaning and repairing procedures.
•Always have the repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
•If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone
3 / EN |
Washing Machine / User’s Manual |
|
|
designated by the importer in order to avoid possible risks.
•Place the product on a rigid, flat and level surface.
•Do not place it on a long-pile rug or similar surfaces.
•Do not place the product on a high platform or near the edge on a cascaded surface.
•Do not place the product on the power cable.
•Never use sponge or scrub materials. These will damage the painted, chrome plated and plastic surfaces.
1.2Intended use
•This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.
•The product must only be used for washing and rinsing of laundry that are marked accordingly.
•The manufacturer waives any responsibility arisen from incorrect usage or transportation.
1.3Children's safety
•Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.
•Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product.
•Do not forget to close the loading door when leaving the room where the product is located.
•Store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package.
While washing the laundry at high temperatures, the loading door glass becomes hot. Therefore, keep especially the children away from the
loading door of the machine while the washing operation is in progress.
1.4 Package information
• Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
1.5 Disposing of the waste product
•This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point. Help protect the environment and natural resources by recycling used products. For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before disposing of the product.
4 / EN |
Washing Machine / User’s Manual |
|
|
1.6 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these
collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
2 Installation
Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
C Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.
Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
B WARNING: Installation and electrical connections of the product must be carried out by the Authorized
Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
A WARNING: Prior to installation, visually check if the product has any defects on it. If so, do not have it
installed. Damaged products cause risks for your safety.
2.1 Appropriate installation location
•Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.
•Total weight of the washing machine and the dryer -with full loadwhen they are placed on top of each other reaches to approx. 180 kilograms. Place the product
on a solid and flat floor that has sufficient load carrying capacity!
•Do not place the product on the power cable.
•Do not install the product at places where temperature may fall below 0ºC.
•Place the product at least 1 cm away from the edges of other furniture.
2.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.
2.3 Removing the transportation locks
A WARNING: Do not remove the transportation locks before taking out the packaging reinforcement.
WARNING: Remove the transportation safety bolts before operating the washing machine! Otherwise, the product will be damaged.
5 / EN |
Washing Machine / User’s Manual |
|
|
1.Loosen all the bolts with a suitable spanner until they rotate freely (C).
2. Remove transportation safety bolts by turning them gently.
3.Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)
A WARNING: Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.
WARNING: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.
1.Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.
C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.
Never move the product without the transportation safety bolts properly fixed in place!
2.4 Connecting water supply
C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.
If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must install the supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a blind stopper group.)
A WARNING: Ensure that the cold and hot water connections are made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.
2.Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
3.Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.
6 / EN |
Washing Machine / User’s Manual |
2.5 Connecting to the drain
•The end of the drain hose must be directly connected to the wastewater drain or to the washbasin.
A WARNING: Your house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out.
•The hose should be attached to a height of at least 40 cm, and 100 cm at most.
•In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
<![if ! IE]><![endif]>100cm 40cm
•To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or do not drive it in the drain more than 15 cm. If it is too long, cut it short.
•The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.
•If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.
2.6 Adjusting the feet
A WARNING: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.
1.Loosen the lock nuts on the feet by hand.
2.Adjust the feet until the product stands level and balanced.
3.Tighten all lock nuts again by hand.
A WARNING: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
2.7 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•Connection must comply with national regulations.
•Power cable plug must be within easy reach after installation.
•If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.
•The voltage specified in the "Technical specifications" section must be equal to your mains voltage.
•Do not make connections via extension cables or multiplugs.
B WARNING: Damaged power cables must be replaced by the Authorized Service Agents.
Transportation of the product
1.Unplug the product before transporting it.
2.Remove water drain and water supply connections.
3.Drain all water that has remained in the product.
4.Install transportation safety bolts in the reverse order of removal procedure;
C Never move the product without the transportation safety bolts properly fixed in place!
A WARNING: Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.
|
|
|
|
|
|
|
|
7 / EN |
|
|
Washing Machine / User’s Manual |
|
|
|
|
3 Preparation
3.1 Sorting the laundry
•Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.
•Always obey the instructions given on the garment tags.
3.2 Preparing laundry for washing
•Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillow case.
•Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.
•Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.
•Place curtains in without compressing them. Remove curtain attachment items.
•Fasten zippers, sew loose buttons and mend rips and tears.
•Wash “machine washable” or “hand washable” labeled products only with an appropriate programme.
•Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.
•Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.
•Use only dyes/colour changers and limescale removers suitable for machine wash. Always follow the instructions on the package.
•Wash trousers and delicate laundry turned inside out.
•Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will reduce pilling.
•Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the machine. Such dusts and powders on the laundry may build up on the inner parts of the machine in time and can cause damage.
3.3 Things to be done for energy saving
Following information will help you use the product in an ecological and energy-efficient manner.
•Operate the product in the highest capacity allowed by the programme you have selected, but do not overload; see, "Programme and consumption table".
•Always follow the instructions on the detergent packaging.
•Wash slightly soiled laundry at low temperatures.
•Use faster programmes for small quantities of lightly soiled laundry.
•Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.
•If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.
•Do not use detergent in excess of the amount recommended on the detergent package.
3.4 Initial use
Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”. To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your product
is not equipped with Drum Cleaning programme, perform the Initial Use procedure in accordance with the methods described under “5.2 Cleaning the loading door and the drum” section of the user manual.
C Use an anti-limescale suitable for the washing machines.
Some water might have remained in the product due to the quality control processes in the production. It is not harmful for the product.
3.5 Correct load capacity
The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired. The machine automatically adjusts the amount of water according to the weight of the loaded laundry.
A warning: Follow the information in the “Programme and consumption table”. When overloaded, machine's washing performance will drop. Moreover, noise and vibration problems may occur.
3.6 Loading the laundry
1.Open the loading door.
2.Place laundry items loosely into the machine.
3.Push the loading door to close until you hear a locking sound. Ensure that no items are caught in the door.
C The loading door is locked while a programme is running. The door can only be opened a while after the programme comes to an end.
A warning: In case of misplacing the laundry, noise and vibration problems may occur in the machine.
3.7 Using detergent and softener
C When using detergent, softener, starch, fabric dye, bleach or limescale remover read the manufacturer's instructions on the package carefully and follow the suggested dosage values. Use measuring cup if available.
8 / EN |
Washing Machine / User’s Manual |
|
|
Detergent Drawer
The detergent drawer is composed of three compartments:
–(1) for prewash
–(2) for main wash
–(3) for softener
–(*) in addition, there is siphon piece in the softener compartment.
2 
3 1
Detergent, softener and other cleaning agents
•Add detergent and softener before starting the washing programme.
•Never leave the detergent drawer open while the washing programme is running!
•When using a programme without prewash, do not put any detergent into the prewash compartment (compartment nr. "1").
•In a programme with prewash, do not put liquid detergent into the prewash compartment (compartment nr. "1").
•Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the laundry in the machine.
•If you are using liquid detergent, do not forget to place the liquid detergent cup into the main wash compartment (compartment nr. "2").
Choosing the detergent type
The type of detergent to be used depends on the type and colour of the fabric.
•Use different detergents for coloured and white laundry.
•Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) used solely for delicate clothes.
•When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.
•Wash woolens with special detergent made specifically for woolens.
A warning: Use only detergents manufactured specifically for washing machines.
warning: Do not use soap powder.
Adjusting detergent amount
The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.
•Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.
•Use lesser detergent for small amounts or lightly soiled clothes.
Using softeners
Pour the softener into the softener compartment of the detergent drawer.
•Do not exceed the (>max<) level marking in the softener compartment.
•If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer.
Using liquid detergents
If the product contains a liquid detergent cup:
•Make sure that you have placed the liquid detergent cup in compartment nr. "2".
•If the liquid detergent has lost its fluidity, dilute it with water before putting in the detergent cup.
If the product does not contain a liquid detergent cup:
•Do not use liquid detergent for the prewash in a programme with prewash.
•Liquid detergent stains your clothes when used with Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent.
Using gel and tablet detergent
Apply the following instructions when using tablet, gel and similar detergents.
•If the gel detergent thickness is fluidal and your machine does not contain a special liquid detergent cup, put the gel detergent into the main wash detergent compartment during first water intake. If your machine contains a liquid detergent cup, fill the detergent into this cup before starting the programme.
•If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly into the drum before washing.
•Put tablet detergents into the main wash compartment (compartment nr. “2”) or directly into the drum before washing.
C Tablet detergents may leave residues in the detergent compartment. If you encounter such a case, place the tablet detergent between the laundry, close to the lower part of the drum in future washings.
Use the tablet or gel detergent without selecting the prewash function.
9 / EN |
Washing Machine / User’s Manual |
|
|
Using starch
•Add liquid starch, powder starch or the fabric dye into the softener compartment.
•Do not use softener and starch together in a washing cycle.
•Wipe the inside of the machine with a damp and clean cloth after using starch.
Using bleaches
•Select a programme with prewash and add the bleaching agent at the beginning of the prewash. Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse and add the bleaching agent while the machine is taking water from the detergent compartment during first rinsing step.
•Do not use bleaching agent and detergent by mixing them.
•Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleaching agent onto the clothes and do not use it for coloured clothes.
•When using oxygen based bleaches, select a programme that washes at a lower temperature.
•Oxygen based bleaches can be used together with detergents; however, if its thickness is not the same with the detergent, put the detergent first into the compartment nr. “2” in the detergent drawer and wait until the detergent flows while the machine is taking in water. Add the bleaching agent from the same compartment while the machine is still taking in water.
Using limescale remover
•When required, use limescale removers manufactured specifically for washing machines only.
3.8 Tips for efficient washing
|
|
Clothes |
|
|
|
Light colours and whites |
|
|
|
(Recommended temperature range based |
|
|
|
on soiling level: 40-90 °C) |
|
|
|
It may be necessary to pre-treat the stains |
|
|
Heavily Soiled |
or perform prewash. Powder and liquid |
|
|
detergents recommended for whites can be |
||
|
(difficult stains |
||
|
used at dosages recommended for heavily |
||
|
such as grass, |
||
|
soiled clothes. It is recommended to use |
||
|
coffee, fruits and |
||
| <![if ! IE]> <![endif]>Level |
blood.) |
powder detergents to clean clay and soil |
|
stains and the stains that are sensitive to |
|||
|
|||
|
bleaches. |
||
|
|
||
| <![if ! IE]> <![endif]>Soiling |
Normally Soiled |
|
|
(For example, |
Powder and liquid detergents recommended |
||
|
stains caused by |
for whites can be used at dosages |
|
|
body on collars |
recommended for normally soiled clothes. |
|
|
and cuffs) |
|
|
|
Lightly Soiled |
Powder and liquid detergents recommended |
|
|
(No visible stains |
for whites can be used at dosages |
|
|
exist.) |
recommended for lightly soiled clothes. |
|
|
|
|
|
|
Clothes |
|
|
|
Colours |
|
|
|
(Recommended temperature range based |
|
|
|
on soiling level: cold -40 °C) |
|
|
|
Powder and liquid detergents recommended |
|
|
|
for colours can be used at dosages |
|
|
Heavily Soiled |
recommended for heavily soiled clothes. It is |
|
|
recommended to use powder detergents to |
||
| <![if ! IE]> <![endif]>Level |
|
clean clay and soil stains and the stains that |
|
|
are sensitive to bleaches. Use detergents |
||
|
without bleach. |
||
|
Powder and liquid detergents recommended |
||
| <![if ! IE]> <![endif]>Soiling |
|
||
Normally Soiled |
for colours can be used at dosages |
||
|
recommended for normally soiled clothes. |
||
|
Use detergents without bleach. |
||
|
|
||
|
|
Powder and liquid detergents recommended |
|
|
Lightly Soiled |
for colours can be used at dosages |
|
|
recommended for lightly soiled clothes. Use |
||
|
|
||
|
|
detergents without bleach. |
|
|
|
Dark colours |
|
|
|
(Recommended temperature range based |
|
|
|
on soiling level: cold -40 °C) |
|
|
Heavily Soiled |
Liquid detergents suitable for colours |
|
| <![if ! IE]> <![endif]>Level |
and dark colours can be used at dosages |
||
|
recommended for heavily soiled clothes. |
||
Normally Soiled |
Liquid detergents suitable for colours |
||
| <![if ! IE]> <![endif]>Soiling |
and dark colours can be used at dosages |
||
|
recommended for normally soiled clothes. |
||
Lightly Soiled |
Liquid detergents suitable for colours |
||
|
and dark colours can be used at dosages |
||
|
|
recommended for lightly soiled clothes. |
|
|
|
Delicates/Woollens/Silks |
|
|
|
(Recommended temperature range based |
|
|
|
on soiling level: cold -30 °C) |
|
|
|
Prefer liquid detergents produced for |
|
|
Heavily Soiled |
delicate clothes. Woollen and silk clothes |
|
|
must be washed with special woollen |
||
|
|
||
| <![if ! IE]> <![endif]>Level |
|
detergents. |
|
|
Prefer liquid detergents produced for |
||
Normally Soiled |
delicate clothes. Woollen and silk clothes |
||
| <![if ! IE]> <![endif]>Soiling |
|||
|
must be washed with special woollen |
||
|
detergents. |
||
|
Prefer liquid detergents produced for |
||
|
|
Lightly Soiled |
delicate clothes. Woollen and silk clothes |
|
must be washed with special woollen |
||
|
||
|
detergents. |
10 / EN |
Washing Machine / User’s Manual |
|
|
4 Operating the product
4.1 Control panel
1 |
2 |
3 |
4
|
8 |
7 |
6 |
5 |
1 |
- Programme Selection knob (Uppermost position On / Off) |
5 |
- Start / Pause button |
|
2 |
- Display |
6 |
- Auxiliary Function buttons |
|
3 |
- Delayed Start Button |
7 |
- Spin Speed Adjustment button |
|
4 |
- Programme Follow-up indicator |
8 |
- Temperature Adjustment button |
|
|
|
|
|
|
4.2 Preparing the machine |
• Woollens |
|||
1.Make sure that the hoses are connected tightly. |
Use this programme to wash your woolen clothes. Select |
|||
2.Plug in your machine. |
the appropriate temperature complying with the tags of your |
|||
3.Turn the tap on completely. |
clothes. Use appropriate detergents for woollens. |
|||
4.Place the laundry in the machine. |
|
|
||
|
“The wool wash cycle of this machine has been |
|||
5.Add detergent and fabric softener. |
|
|||
|
approved by The Woolmark Company for the washing |
|||
4.3 Programme selection and tips for efficient |
|
of machine washable wool products provided that the |
||
|
products are washed according to the instructions |
|||
washing |
|
|||
|
on the garment label and those issued by the |
|||
1. Select the programme suitable for the type, quantity |
|
manufacturer of this washing machine. M1367” |
||
and soiling degree of the laundry in accordance with |
|
“In UK, Eire, Hong Kong and India the Woolmark trade |
||
the "Programme and consumption table" and the |
|
mark is a Certification trade mark.” |
||
temperature table below. |
4.5 Additional programmes |
|||
2.Select the desired programme with the Programme |
For special cases, additional programmes are available in |
|||
Selection button. |
the machine. |
|||
4.4 Main programmes |
|
|
||
C |
Additional programmes may differ according to the model |
|||
Depending on the type of fabric, use the following main |
||||
of the machine. |
||||
programmes. |
|
|
||
• Cottons |
• Cottons Eco |
|||
Use this programme for your cotton laundry (such as bed |
||||
By washing normally soiled cotton and linen laundry |
||||
sheets, duvet and pillowcase sets, towels, bathrobes, |
||||
in this programme, you can ensure higher energy and |
||||
underwear, etc.). Your laundry will be washed with vigorous |
||||
water efficiency than other cotton programmes do. Actual |
||||
washing action for a longer washing cycle. |
||||
water temperature may be different from the stated wash |
||||
• Synthetics |
||||
temperature. While doing the laundry at lesser amounts (e.g. |
||||
Use this programme to wash your synthetic clothes (shirts, |
||||
half capacity or less) duration of the program may reduce |
||||
blouses, synthetic/cotton blends, etc.). It washes with a |
||||
automatically at the later stages of the program. In this |
||||
gentle action and has a shorter washing cycle compared to |
||||
case, energy and water consumption will reduce for a more |
||||
the Cotton programme. |
||||
economic wash. This feature is provided in the models with |
||||
For curtains and tulle, use the Synthetic 40°C programme |
||||
the remaining time indicator. |
||||
with prewash and anti-creasing functions selected. As their |
||||
• BabyProtect |
||||
meshed texture causes excessive foaming, wash the veils/ |
||||
This is a long lasting programme which you may use for |
||||
tulle by putting little amount of detergent into the main |
||||
your laundry for which you require an anti-allergic and |
||||
wash compartment. Do not put detergent in the prewash |
||||
hygienic washing at high temperature with intensive and |
||||
compartment. |
||||
long washing cycle. |
||||
|
|
|||
|
|
|
||
11 / EN |
|
|
Washing Machine / User’s Manual |
|
|
|
|
|
|
• Gentle Care 20°
You can wash your delicate clothes in this programme. It washes with a gentler action without any interim spins
compared to the Synthetics programme. It should be used
for clothes for which delicate washing is recommended.
• Hand Wash 20°
Use this programme to wash your woolen/delicate clothes that bear “not machinewashable” tags and for which hand wash is recommended. It washes laundry with a very gentle
washing action to not to damage clothes.
• Daily Xpress
Use this programme to wash your lightly soiled cotton
clothes in a short time.
• Xpress Super Short
Use this programme to wash your little amount of lightly soiled cotton clothes in a short time. Your clothes will be
washed at 30 °C in a short time like 14 minutes.
• Dark Care
Use this programme to wash your dark coloured laundry or the laundry that you do not want it get faded. Washing is performed with little mechanic action and at low temperatures. It is recommended to use liquid detergent or
woolen shampoo for dark coloured laundry.
• Mix 40
Use this programme to wash your cotton and synthetic
clothes together without sorting them.
• Shirts
Use this programme to wash the shirts made of cotton,
synthetic and synthetic blended fabrics together.
• Hygiene 20°
Use this programme for your laundry for which you require washing at lower temperature with intensive and long washing cycle. Use this programme for your laundry for which you require hygienic washing at lower temperature.
4.6 Special programmes
For specific applications, select any of the following
programmes.
• Rinse
Use this programme when you want to rinse or starch
separately.
• Spin + Drain
Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine. Before selecting this programme, select the desired spin
speed and press Start / Pause button. First, the machine will drain the water inside of it. Then, it will spin the laundry with the set spin speed and drain the water coming out of them. If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start / Pause button.
C Use lower spin speeds for delicate laundries.
4.7 Temperature selection
Whenever a new programme is selected, the maximum temperature for the selected programme appears on the temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually.
C If the programme has not reached the heating step yet, you can change the temperature without switching the machine to Pause mode.
4.8 Speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See "Auxiliary
function selection" section for explanations of these options.
Rinse Hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start / Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
Program resumes. Water is drained, laundry is spun and the programme is completed.
C If the programme has not reached the spinning step yet, you can change the speed without switching the machine to Pause mode.
12 / EN |
Washing Machine / User’s Manual |
|
|
4.9 Programme and consumption table
EN |
|
2 |
|
|
|
|
|
|
|
Programme |
|
|
<![if ! IE]> <![endif]>(kg)LoadMax. |
|
<![if ! IE]> <![endif]>ConsumptionWater (l) |
|
<![if ! IE]> <![endif]>ConsumptionEnergy (kWh) |
|
<![if ! IE]> <![endif]>Speed***Max. |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
|
46 |
|
0,74 |
|
1000 |
|
60** |
|
|
|
|
||||
Cottons Eco |
60** |
|
3 |
|
46 |
|
0,60 |
|
1000 |
|
40** |
|
3 |
|
46 |
|
0,60 |
|
1000 |
|
90 |
|
6 |
|
70 |
|
2,48 |
|
1000 |
Cottons |
60 |
|
6 |
|
70 |
|
1,50 |
|
1000 |
|
40 |
|
6 |
|
70 |
|
0,96 |
|
1000 |
Synthetics |
60 |
|
3 |
|
50 |
|
0,95 |
|
800 |
40 |
|
3 |
|
50 |
|
0,73 |
|
800 |
|
|
|
|
|
|
|||||
|
90 |
|
6 |
|
60 |
|
1,80 |
|
1000 |
Daily Xpress |
60 |
|
6 |
|
60 |
|
1,00 |
|
1000 |
|
30 |
|
6 |
|
60 |
|
0,20 |
|
1000 |
Xpress Super Short |
30 |
|
2 |
|
38 |
|
0,25 |
|
1000 |
Shirts |
60 |
|
3 |
|
48 |
|
0,34 |
|
600 |
Mix 40 |
40 |
|
3 |
|
50 |
|
0,73 |
|
800 |
Hand Wash 20 |
20 |
|
1 |
|
41 |
|
0,15 |
|
600 |
Woollens |
40 |
|
1,5 |
|
56 |
|
0,27 |
|
600 |
BabyProtect |
90 |
|
6 |
|
85 |
|
2,20 |
|
1000 |
Dark Care |
40 |
|
3 |
|
70 |
|
0,50 |
|
800 |
Hygiene 20º |
20 |
|
2 |
|
95 |
|
0,40 |
|
1000 |
Gentle Care 20 |
20 |
|
3 |
|
45 |
|
0,15 |
|
600 |
|
|
|
|
|
|
|
|
|
|
Auxiliary functions
| <![if ! IE]> <![endif]>Prewash |
<![if ! IE]> <![endif]>Quick Wash |
<![if ! IE]> <![endif]>Pet Hair Removal |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
••
• • •
•
Selectable temperature range °C
40-60
40-60
40-60
Cold-90
Cold-90
Cold-90
Cold-60
Cold-60
Cold-90
Cold-90
Cold-90
Cold-30
Cold-60
Cold-40
20
Cold-40
30-90
Cold-40
20
20
• : Selectable
*: Automatically selected, not cancellable.
**: Energy Label programme (EN 60456 Ed.3)
***: If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. - : See the programme description for maximum load.
** “Cotton eco 40°C and Cotton eco 60°C are standard programmes.” These programmes are known as '40°C cotton standard programme' and '60°C cotton standard programme' and shown on the panel
with 
symbols.
C Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time.
The auxiliary functions in the table may vary according to the model of your machine.
“Selectability of auxiliary functions might be changed by the manufacturer. New selectabilities might be added or existing ones might be removed.”
“The spin speed of your machine may vary among the programmes, however this speed cannot exceed the max. spin speed of your machine.”
13 / EN |
Washing Machine / User’s Manual |
|
|
4.10 Auxiliary function selection
Select the required auxiliary functions before starting the program. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running
programme without pressing the Start / Pause button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel.
If the auxiliary function cannot be selected or canceled, light of the relevant auxiliary function will blink 3 times to warn the user.
CSome functions cannot be selected together. For example, Prewash and Quick Wash.
If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be cancelled and the second auxiliary function selection will remain active. For example, if you want to select Quick Wash after you have selected the Prewash, Prewash will be cancelled and Quick Wash will remain active.
Auxiliary function that is not compatible with the program cannot be selected. (See "Programme and consumption table")
Auxiliary Function buttons may vary according to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time.
C Prewash without detergent is recommended for tulle and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics programmes. It decreases the washing times for lightly soiled laundries and also the number of rinsing steps.
C When you select this function, load your machine with half of the maximum laundry specified in the programme table.
• Pet hair removal
This function helps to remove pet hair that remain on your garments more effectively.
When you select this function, Prewash and Extra Rinse steps are added to the normal programme. Thus, washing is performed with more water (30%) and the pet hair is removed more effectively.
A WARNING: Never wash your pets in the washing machine.
Delayed Start
With the Delayed Start function the startup of the programme may be delayed up to 19 hours. Delayed start time can be increased by increments of 1 hour.
C Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the clothes.
1.Open the loading door, place the laundry and put detergent, etc.
2.Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3.Set the desired time by pressing the Delayed Start button.
4.Press Start / Pause button. The delayed start time you have set is displayed. Delayed start countdown starts. “_” symbol next to the delayed start time moves up and down on the display.
C Additional laundry may be loaded during the delayed start period.
5.At the end of the countdown, duration of the selected programme will be displayed. “_” symbol will disappear and the selected programme will start.
Changing the Delayed Start period
If you want to change the time during countdown:
1.Press Delayed Start button. Time will increase by 1 hour each time you press the button.
2.If you want to decrease the delayed start time, press Delayed Start button repeatedly until the desired delayed start time appears on the display.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the programme immediately:
1.Set the Delayed Start period to zero or turn the Programme Selection knob to any programme. Thus, Delayed Start function will be canceled. The End/Cancel light flashes continuously.
2.Then, select the programme you want to run again.
3.Press Start / Pause button to start the programme.
4.11 Starting the programme
1.Press Start / Pause button to start the programme.
2.Programme follow-up light showing the startup of the programme will turn on.
CIf no programme is started or no button is pressed within 1 minute during programme selection process, the machine will switch to Pause mode and the illumination level of the temperature, speed and loading door indicator lights will dim. Other indicator lights and indicators will turn off. Once the Programme Selection knob is rotated or any button is pressed, indicator lights and indicators will turn on again.
4.12 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.
CIf the Programme Selection knob is turned when the Child Lock is active, "Con" appears on the display. The Child Lock does not allow any change in the programmes and the selected temperature, speed and auxiliary functions.
Even if another programme is selected with the Programme Selection knob while the Child Lock is active, previously selected programme will continue running.
14 / EN |
Washing Machine / User’s Manual |
|
|
Loading...