1 Important Instructions Regarding Safety and Environment
This chapter contains safety information
that will help you avoid the risk personal
injury or property damage. Failure to
follow these instructions shall render any
product warranty void.
Intended use
WARNING:
Keep ventilation openings, in
A
the appliance enclosure or in
the built-instructure, clear of
obstruction.
WARNING:
Do not use mechanical
devices or other means to
A
accelerate the defrosting
process, other than those
recommended by the
manufacturer.
WARNING:
A
Do not damage the refrigerant
circuit.
WARNING:
Do not use electrical
appliances inside the food
A
storage compartments of the
appliance, unless they are of
the type recommended by the
manufacturer.
This appliance is intended to be used in
household and similar applications such
as
– staff kitchen areas in shops, offices and
other working environments;
– farm houses and by clients in hotels,
motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail
applications.
1.1. General Safety
• Persons with physical, sensory or
mental disabilities; persons who
lack experience and information and
children should not approach, enter or
play with the product.
• Failure to follow the instructions and
uncontrolled use of the product lead to
dangerous results!
• Unplug the product if you encounter a
failure during use.
• If the product malfunctions, it must
not be operated until repaired by the
authorised service provider. Risk of
electric shock!
• Plug the product into a grounded
socket protected by a fuse that
corresponds to the value on its
nameplate. Have a qualified electrician
ground the product. Our company
cannot be held responsible for
damages resulting from the failure to
use the product with a grounded socket
pursuant to local regulations.
• Unplug the product when not in use.
• Never wash the product by spreading
or pouring water onto it! Risk of electric
shock!
• Never touch the plug with wet hands!
• Never unplug the product by pulling the
cable. Always pull the plug by holding
the socket.
Refrigerator / User Manual
3 / 31 EN
Instructions for safety and environment
• Do not plug the refrigerator if the
wall socket is loose.
• Never connect your refrigerator
to energy saving devices. Such
systems are harmful to your
product.
• Unplug the product during
installation, care, cleaning and
repairing procedures.
• Always have the Authorised
Service Provider install the
product and establish its electrical
connections. The manufacturer
cannot be held responsible for
damages caused by procedures
performed by unauthorised persons.
• Do not eat cone ice cream or
ice cubes immediately after you
take them out of the freezer
compartment! This may cause
frostbite in your mouth!
• Do not touch frozen food with wet
hands! They may stick to your hand!
• Do not put bottled or canned
liquid beverages in the freezer
compartment. They may burst!
• Never use steam or steam cleaners
to clean or defrost the refrigerator.
Steam gets into contact with the live
parts in your refrigerator, causing
short circuit or electric shock!
• Do not use mechanical devices
or other means to accelerate the
defrosting process other than those
recommended by the manufacturer.
• Never use the parts in your
refrigerator such as the door and
drawer as a means of support or
step. This may cause the product to
tip over or damage the parts of it.
• Do not damage the parts where the
refrigerant is circulating with drilling
or cutting tools. The refrigerant
that might blow out when the gas
channels of the evaporator, pipe
extensions or surface coatings are
punctured causes skin irritations
and eye injuries.
• Do not cover or block the ventilation
holes in your refrigerator with any
object.
• Place the beverage with higher
proofs tightly closed and vertically.
• Do not use gaseous sprays near the
product since there is the risk or fire
or explosion!
• Flammable items or products
that contain flammable gases
(e.g. spray) as well as explosive
materials should never be kept in
the appliance.
• Do not place vessels filled with
liquid onto the product. Splashing
water on an electrical part may
cause electric chock or the risk of
fire.
• Do not store items that need precise
temperature adjustment (such as
vaccines, heat-sensitive medication,
science materials etc.) in the
refrigerator.
• If you are not going to use the
product for a long time, unplug it
and remove the food in it.
• If there is a blue light on the
refrigerator, do not look at this light
with optical tools.
• Exposing the product to rain, snow,
sun or wind is dangerous in terms
of electrical safety.
• In products with mechanical control
(thermostat), wait for 5 minutes
to plug in the product again after
unplugging.
4 / 31 EN
Refrigerator / User Manual
Instructions for safety and environment
• Do not overload the refrigerator.
Objects in the refrigerator may fall
down when the door is opened,
causing injury or damage. Similar
problems may arise if any object is
placed onto the product.
• If the product has a door handle, do
not pull the handle when re-locating
the product. The handle might be
loose.
• Be careful not to jam your hand or
any other body part in the moving
parts of the refrigerator.
• Do not put your hand or any other
foreign materials into the ice
machine while it is operating.
1.1.1 Hydrocarbon (HC) Warning
• If your product's cooling system
contains R600a:
This gas is flammable. Therefore, pay
attention not to damage the cooling
system or the piping during use and
transportation. If damaged, keep
the product away from potential fire
sources that may cause it to catch
fire and ventilate the room where the
product is placed.
If the product is damaged and
if you see gas leak, please
keep away from the gas. It may
C
cause frostbite when it gets into
contact with the skin.
(including R134)
Ignore this warning if the cooling
system of your product contains
C
R134a.
Refrigerator / User Manual
C
A
1.1.2 For Products with a Water
Dispenser/Ice Machine
• Pressure for cold water inlet shall
be maximum 90 psi (620 kPa). If
your water pressure exceeds 80 psi
(550 kPa), use a pressure limiting
valve in your mains system. If you
do not know how to check your
water pressure, ask for the help of a
professional plumber.
• If there is a risk of water impact
in your installation, always use a
water impact protection equipment
in that installation. Please consult
professional plumbers if you are not
sure if there is water impact in your
installation.
• Do not make installation on the hot
water inlet.
• Use drinking water only.
• Take the necessary measures
against the freezing risk of the
hoses. The water temperature
operating range must be 0.6°C
(33°F) minimum and 38°C (100°F)
maximum.
A
5 / 31EN
Type of gas used in the product
is stated on the type plate which
is on the left wall inside the
refrigerator.
WARNING:
Never throw the product into fire
for disposal.
WARNING:
Never connect the product
to a cold water mains with a
pressure of 550 kPa (80 psi)
or above.
Instructions for safety and environment
1.2. Intended Use
• This product has been designed for
domestic use. It is not suitable for
commercial use and it must not be
used out of its intended use.
• It must be used only for storing
food.
• The manufacturer will not take any
responsibility for damages resulting
from improper use or transport.
• Original spare parts will be available
for 10 years after the purchase date
of the product.
1.3. Children's Safety
• If there is a lock on the door of the
product, the key should be kept out
of the reach of children.
• Do not let children play with the
product.
DANGER:
Before disposing your old
refrigerator or freezer:
• Children may get locked
inside.
• Remove the doors.
A
• Leave the shelves to
prevent children from
getting inside the product
easily.
1.4. Compliance with the WEEE Directive
and Disposing the Waste Product:
do not dispose the product with normal domestic
waste or other waste at the end of its service life.
Take it to a collection centre for recycling electrical
and electronic equipment. Please consult local
authorities to learn about the locations of such
collection centres.
1.5. Compliance with the RoHS Directive:
The unit you have purchased conforms to the EU
RoHS Directive (2011/65/EU). It does not contain
harmful or prohibited materials specified in the
Directive.
1.6. Packaging Information
• Packaging materials of the product have been
manufactured from recyclable materials in
accordance with our National Environment
Regulations. Do not dispose the packaging
materials with normal domestic waste or other
types of waste. Take these materials to a
recycling point designated by local authorities.
DANGER:
Risk of Fire or Explosion:
• This product uses flammable
refrigerant.
• Do not use mechanical devices to
defrost the refrigerator.
• Do not use chemicals for cleaning.
• Do not pierce the refrigerant pipe.
A
• If the refrigerant pipe is pierced, it
must be repaired only by licensed
service personnel.
• Please consult the repair/user
manual before cleaning the product.
All safety instructions must be
followed.
• Dispose the product according to
federal or local regulations.
This product conforms to the EU
WEE Directive (2012/19 EU). This
product bears a classification symbol
for waste electrical and electronic
equipment (WEEE). This product has
been manufactured from high quality
parts and materials which can be
reused and are suitable for recycling. Therefore,
6 / 31 EN
Refrigerator / User Manual
2 Your appliance
1
2
*9
3
4
*8
5
*8
5
*6
7
A
B
A- Cooler compartment
B- Freezer compartment
1. Door shelves of fridge compartment
2- Fridge compartment glass shelf
3- Chiller compartment
4- Everfresh
5- Crisper
It may not apply to all models.
C
Refrigerator / User Manual
Figures in this user manual are given as an example and may not match the product exactly. If the
relevant parts are not available in the product you purchased, the figure applies to other models.
6- Freezer compartment movable drawer
7- Freezer compartment drawers
8- Auto Icematic
9- Water reservoir
7 / 31 EN
3Installation
3.1. Appropriate location for installation
Contact an Authorized Service for the installation of the
product. In order to prepare the product for use, refer the
information in the user manual and ensure that electrical
installation and water installation are appropriate. If not,
call a qualified electrician and technician to have any
necessary arrangements carried out.
WARNING: Manufacturer shall not
B
be held liable for damages that may
arise from procedures carried out by
unauthorized persons.
WARNING: Product must not be plugged
B
in during installation. Otherwise, there is
the risk of death or serious injury!
your product in order to achieve an efficient operation.
If the product is to be placed in a recess in the wall,
pay attention to leave at least 5 cm distance with the
ceiling and the side walls.For versions which do not
have plastic wedges, make sure that a clearance of 5
cm is left from the rear wall.
room where the product shall be placed is
so tight to prevent passing of the product,
contact the authorized service.
• In environments where the room temperature drops
below 10 °C, the refrigerator continues to operate to
preserve the food in the freezer. However, the fresh
food in the fridge compartment may freeze due to
the cold environment.
3.2. Installing the plastic wedges
Plastic wedges supplied with the product are used to
create the distance for the air circulation between the
product and the rear wall.
1. To install the wedges, remove the screws on the
product and use the screws supplied together with
the wedges.
2. Insert the 2 plastic wedges onto the rear ventilation
cover as illustrated in the figure.
8 /31 EN
Refrigerator / User Manual
Installation
3.3. Adjusting the feet
If the product stands unbalanced after installation,
adjust the feet on the front by rotating them to the
right or left.
3.4. Electrical connection
A
WARNING: Do not make connections
via extension cables or multi-plugs.
WARNING: Damaged power cable
B
must be replaced by the Authorized
Service Agent.
If two coolers are to be installed side
by side, there should be at least 4 cm
C
distance between them.
• Our company shall not be liable for any damages
that will arise when the product is used
without grounding and electrical connection in
accordance with the national regulations.
• Power cable plug must be within easy reach after
installation.
• Do not use extension cords or cordless multiple
outlets between your product and the wall outlet.
Warning for hot surfaces!
The side walls of your product are
equipped with coolant pipes to
improve the cooling system. The high
temperature fluid may flow through
C
these surfaces and may heat the
surfaces on the side walls. This is
normal and does not require service
maintenance. Be careful when touching
these areas.
Refrigerator / User Manual
9 /31 EN
4Preparation
4.1. Things to be done for energy saving
mehmet
Connecting the product to electric energy
A
saving systems is risky as it may cause
damage on the product.
• Do not leave the doors of your refrigerator open for
a long time.
• Do not put hot food or drinks in your refrigerator.
• Do not overload the refrigerator, cooling capacity will
fall when the air circulation inside is hindered.
• To be able to store the maximum amount of food in
the freezer compartment of your refrigerator, remove
the icebox and the ice container and place them on
top of the glass shelf. The power consumption stated
for your refrigerator was determined after removing
the icebox, ice container, and upper and middle
drawers to allow maximum loading. Using the lower
drawer while loading is highly recommended.
• Depending on the features of your product, thawing
frozen food in fridge compartment will both provide
energy saving and preserve the food quality.
• Airflow should not be blocked by placing foods in
front of the freezer compartment fan. Foods should
be loaded by leaving minimum 5 cm space in front
of the protective fan grid.
• The temperature sensor in the freezer compartment
must be prevented from directly contacting
food packages. If they get in contact, the power
consumption of the product may increase.
4.2. Initial use
Before starting to use your refrigerator, ensure that
all preparations are made in accordance with the
instructions in sections "Instructions for safety and
environment" and "Installation".
Run the product without putting any food for 6 hours
and do not open its door unless certainly required.
You will hear a noise when the compressor
C
starts up. The liquids and gases sealed
within the refrigeration system may also
give rise to noise, even if the compressor is
not running and this is normal.
It is normal that the front edges of
C
the refrigerator are hot. These areas
are designed to be warm to avoid
condensation.
Inside of your product must be cleaned.
C
If two coolers are to be installed side
C
by side, there should be at least 4 cm
distance between them.
10 /31 EN
Refrigerator / User Manual
5Operating the product
5.1. Indicator panel
Indicator panels may vary according to the product model.
Audio – visual functions on the indicator panel helps you in using your product.
*17
6
22
21
23
8
5
*16
*7
*13
1. Temperature Setting/Temperature Increase
2. Temperature Setting-Slider/Temperature value
indicator
3. Temperature Unit Selection (°C) Celsius indicator
4. Temperature Unit Selection (°F) Fahrenheit
indicator
5. Temperature Setting/Temperature Decrease
6. Quick Cooling function indicator/button
7. * Wireless
8. Economy Mode indicator/button
9. *Joker Freezer indicator/button
10. *Auto Door
11. High Temperature Warning/Failure
12. *Bottle Cooler
It may not apply to all models.
*9a
*9b
*12
20
2
3
4
19
*24
18
1
*10
14
11
15
13. *Filter Replacement Warning/Button
14. Menu Button
15. Product On/Off indicator/button
16. *Icematic indicator/button
17. *Sabbath Mode
18. Vacation Mode indicator/button
19. Key Lock indicator
20. Quick Freeze function indicator/button
21. Cabinet Selection
22. Fridge compartment indicator
23. Freezer compartment indicator
24. *Joker compartment indicator
*Optional: Figures in this user manual are given as an example and may not match the product
C
exactly. If the relevant parts are not available in the product you purchased, the figure applies to other
models.
Refrigerator / User Manual
11 / 31 EN
Operating the product
*17
6
22
21
23
8
5
*16
*7
*13
1. Temperature Setting/Temperature Increase
2. Temperature Setting-Slider/Temperature value
indicator
3. Temperature Unit Selection (°C) Celsius indicator
4. Temperature Unit Selection (°F) Fahrenheit
indicator
5. Temperature Setting/Temperature Decrease
6. Quick Cooling function indicator/button
7. * Wireless
8. Economy Mode indicator/button
9. *Joker Freezer indicator/button
10. *Auto Door
11. High Temperature Warning/Failure
12. *Bottle Cooler
It may not apply to all models.
*9a
*9b
*12
20
2
3
4
19
18
1
*10
14
11
15
13. *Filter Replacement Warning/Button
14. Menu Button
15. Product On/Off indicator/button
16. *Icematic indicator/button
17. *Sabbath Mode
18. Vacation Mode indicator/button
19. Key Lock indicator
20. Quick Freeze function indicator/button
21. Cabinet Selection
22. Fridge compartment indicator
23. Freezer compartment indicator
C
*Optional: Figures in this user manual are given as an example and may not match the product
exactly. If the relevant parts are not available in the product you purchased, the figure applies to other
models.
12 / 31 EN
Refrigerator / User Manual
Operating the product
1. Temperature Setting/Temperature Increase
It increases the temperature of the selected
compartment when pressed.
2. Temperature Setting-Slider/Temperature
value indicator
It shows the temperature value of the selected
compartment. Moreover, you can slide your finger
top-down or down-top to increase or decrease the
temperature value.
3. Temperature Unit Selection (°C)
Celsius indicator
When this button is pressed, the temperature value
will be activated as Celsius.
It is the Celsius indicator. When Celsius indication
has been activated, temperature set values will be
shown in Celsius and the relevant icon will turn on
completely;
the Fahrenheit icon will turn on by 50%.
4. Temperature Unit Selection (°F)
Fahrenheit indicator
When this button is pressed, the temperature value
will be activated as Fahrenheit.
It is the Fahrenheit indicator. When Fahrenheit
indication has been activated, temperature set
values will be shown in Fahrenheit and the relevant
icon will turn on completely;
the Celsius icon will turn on by 50%.
5. Temperature Setting/Temperature Decrease
It decreases the temperature of the selected
compartment when pressed.
6. Quick cooling function indicator
When the Quick Cooling function has been
activated, the indicator will turn on completely. When
the function has been cancelled, the product will
return to its usual settings and the indicator will turn
on by 50%.
Quick cooling function button
It is used to activate or deactivate the quick cooling
function.
Use quick cooling function when you
C
want to quickly cool the food placed
in the fridge compartment. If you want
to cool large amounts of fresh food,
activate this function before putting the
food into the product.
If you do not cancel it, quick cooling
C
will cancel itself automatically after 8
hours at the most or when the fridge
compartment reaches to the required
temperature.
If you press the quick cooling button
C
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.
C
This function is not recalled when
power restores after a power failure.
7. Wireless
When this button is pressed, the product will be
introduced to the home network for the first time.
Once the function has been activated, the indicator
will turn on by 100%; and if the function has been
cancelled, it will turn on by 50%.
8. Economy Mode indicator/button
Press this button to activate/deactivate the economy
mode.
Once the economy mode has been activated, the
indicator will turn on by 100%. While the function
is active, the freezer will start to work on economy
mode after at least 6 hours. Once the function has
been cancelled, the indicator will turn on by 50%.
9a. *Joker Freezer indicator/button
Once the button has been pressed, the joker
compartment will function as a freezer and the
indicator will turn on by 100%. The joker fridge
indicator will turn on by 50%.
9b. *Joker fridge indicator/button
Once the button has been pressed, the joker
compartment will function as a fridge and the
indicator will turn on by 100%. The joker freezer
indicator will turn on by 50%.
10.* Auto Door
Press this button to activate/deactivate the auto door
mode. Once the function has been activated, the
indicator will turn on by 100%. Once the function
has been cancelled, the indicator will turn on by
50%.
Refrigerator / User Manual
13 / 31 EN
Operating the product
While the function is active, touch the relevant
section on the door handle to open the door
automatically.
11. High Temperature Warning/Failure
This indicator illuminates during power failure, high
temperature failures and error warnings. During
long-term power failures, the highest temperature
value that the freezer compartment reaches will
blink on the digital display. After checking the food
located in the freezer compartment, press the high
temperature warning button to clear the warning.
12. *Bottle Cooler
Press this button to activate/deactivate the bottle
cooler mode.
Once the function has been cancelled, the indicator
will turn on by 100%. If the function is cancelled, the
indicator will turn on by 50%.
13. *Filter Replacement Warning/Button
This icon turns on when the filter needs to be reset.
Once this button is pressed, the filter will be reset
and the reset icon will go off.
14. Menu Button
Use this button to switch the display to sleep mode
or cancel the sleep mode. If you do not press any
button or open the door for 30 seconds, it will
automatically switch to sleep mode.
15. Product On/Off indicator/button
To turn on/off the product, press and hold the On/Off
button for 3 seconds.
After the product has been turned off, only the on/
off indicator will turn on by 100%; all the other indicators will go off. To turn on the product, press and
hold the same button for 3 seconds. The refrigerator
will become active and the on/off indicator will turn
on by 50%.
16. *Icematic indicator/button
Press this button to activate/deactivate the icematic.
If the indicator is on by 100%, this means that the
icematic is working. If the indicator is on by 50%,
this means that the icematic is off.
Water flow from water tank will stop
C
when this function is not selected.
However, ice made previously can be
taken from the icematic.
17. *Sabbath Mode
Press this button to activate/deactivate the Sabbath
mode. Once the function has been activated, the
indicator will turn on by 100%. Once the function
has been cancelled, the indicator will turn on by
50%.
18. Vacation Mode indicator/button
Press this button to activate the vacation button; the
vacation mode indicator will turn on by 100%. When
the vacation function is active, “- -” will be displayed
on the Temperature Value display and no active
cooling will be performed in the fridge compartment.
It is not suitable to keep the food in the fridge
compartment when this function is activated. Other
compartments will continue to be cooled according
to their set temperatures.
To cancel this function, press the
function button again. Once the function has been
cancelled, the indicator will turn on by 50%.
Vacation
19. Key Lock indicator
Press quick cooling and vacation buttons
simultaneously for 3 seconds. While pressing the
button, a countdown will start on the temperature
value display. Once the key lock has been activated,
the key lock indicator will turn on by 100% and
the key lock mode will become activated. Buttons
will not function if the Key lock mode is active.
Press quick cooling and vacation buttons again
simultaneously for 3 seconds. While pressing the
button, a countdown will start on the temperature
value display. Once the key lock has been cancelled,
the key lock indicator will turn on by 50% and the
key lock mode will be deactivated.
Activate this function if you want to prevent
changing of the temperature setting of the
refrigerator.
20.Quick freeze function indicator
When the Quick Freeze function has been activated,
the indicator will turn on by 100%. When the
function has been cancelled, the product will return
to its usual settings and the indicator will turn on by
50%.
Quick freeze function button
It is used to activate or deactivate the quick freeze
function.
14 / 31 EN
Refrigerator / User Manual
Operating the product
Press this button to activate or deactivate the quick
freeze function. When you activate the function, the
freezer compartment will be cooled to a temperature
lower than the set value.
Use the quick freeze function when you
C
want to quickly freeze the food placed
in freezer compartment. If you want
to freeze large amounts of fresh food,
activate this function before putting the
food into the product.
If you do not cancel it, Quick Freeze
C
will cancel itself automatically after 4
hours at the most or when the fridge
compartment reaches to the required
temperature.
C
This function is not recalled when
power restores after a power failure.
21. Cabinet Selection
Press the cabinet selection button to see and
change the temperature value of the fridge or
freezer on the Temperature value indicator.
22. Fridge compartment indicator
When this indicator is active, temperature of
the fridge compartment will be displayed on the
temperature value indicator.
23. Freezer compartment indicator
When this indicator is active, temperature of the
freezer compartment will be displayed on the
temperature value indicator.
24.*Joker compartment indicator
When this indicator is active, temperature of joker
freezer compartment will be displayed on the
temperature value indicator.
Refrigerator / User Manual
15 / 31 EN
Operating the product
5.2. Indicator panel
Indicator panels may vary according to the product model.
Audio – visual functions on the indicator panel helps you in using your product.
*13
16
*7b
8
15
4
5
4
4
*9
10
2
3
*6
17
14
1
1
18
*12
1
19
*7a
C
11
It may not apply to all models.
*Optional: Figures in this user manual are given as an example and may not match the product
exactly. If the relevant parts are not available in the product you purchased, the figure applies to other
models.
16 / 31 EN
Refrigerator / User Manual
Operating the product
1. Temperature Setting-Slider/Temperature value
indicator
2. Temperature Unit Selection (°C) Celsius indicator
3. Temperature Unit Selection (°F) Fahrenheit
indicator
4. Temperature Setting/Temperature Decrease
5. Quick Cooling function indicator/button
6. * Wireless
7. *Joker Freezer indicator/button
8. High Temperature Warning/Failure
9. *Filter Replacement Warning/Button
10. Menu Button
11. Product On/Off indicator/button
1. Temperature Setting-Slider/Temperature
value indicator
It shows the temperature value of the selected
compartment. Moreover, you can slide your finger
top-down or down-top to increase or decrease the
temperature value.
2. Temperature Unit Selection (°C)
Celsius indicator
When this button is pressed, the temperature value
will be activated as Celsius.
It is the Celsius indicator. When Celsius indication
has been activated, temperature set values will be
shown in Celsius and the relevant icon will turn on
completely;
the Fahrenheit icon will turn on by 50%.
3. Temperature Unit Selection (°F)
Fahrenheit indicator
When this button is pressed, the temperature value
will be activated as Fahrenheit.
It is the Fahrenheit indicator. When Fahrenheit
indication has been activated, temperature set
values will be shown in Fahrenheit and the relevant
icon will turn on completely;
the Celsius icon will turn on by 50%.
4. Temperature Setting/Temperature Decrease
It decreases the temperature of the selected
compartment when pressed.
5. Quick cooling function indicator
When the Quick Cooling function has been
activated, the indicator will turn on completely. When
the function has been cancelled, the product will
return to its usual settings and the indicator will turn
on by 50%.
12. *Icematic indicator/button
13. *Sabbath Mode
14. Vacation Mode indicator/button
15. Key Lock indicator
16. Quick Freeze function indicator/button
17. Fridge compartment indicator
18. Freezer compartment indicator
19. *Joker compartment indicator
Quick cooling function button
It is used to activate or deactivate the quick cooling
function.
Use quick cooling function when you
C
want to quickly cool the food placed
in the fridge compartment. If you want
to cool large amounts of fresh food,
activate this function before putting the
food into the product.
If you do not cancel it, quick cooling
C
will cancel itself automatically after 8
hours at the most or when the fridge
compartment reaches to the required
temperature.
If you press the quick cooling button
C
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.
C
This function is not recalled when
power restores after a power failure.
6. Wireless
When this button is pressed, the product will be
introduced to the home network for the first time.
Once the function has been activated,
Refrigerator / User Manual
17 / 31 EN
Operating the product
the indicator will turn on by 100%; and if the
function has been cancelled, it will turn on by 50%.
7a. *Joker Freezer indicator/button
Once the button has been pressed, the joker
compartment will function as a freezer and the
indicator will turn on by 100%. The joker fridge
indicator will turn on by 50%.
7b. *Joker fridge indicator/button
Once the button has been pressed, the joker
compartment will function as a fridge and the
indicator will turn on by 100%. The joker freezer
indicator will turn on by 50%.
8. High Temperature Warning/Failure
This indicator illuminates during power failure, high
temperature failures and error warnings. During
long-term power failures, the highest temperature
value that the freezer compartment reaches will
blink on the digital display. After checking the food
located in the freezer compartment, press the high
temperature warning button to clear the warning.
9. *Filter Replacement Warning/Button
This icon turns on when the filter needs to be reset.
Once this button is pressed, the filter will be reset
and the reset icon will go off.
10. Menu Button
Use this button to switch the display to sleep mode
or cancel the sleep mode. If you do not press any
button or open the door for 30 seconds, it will
automatically switch to sleep mode.
11. Product On/Off indicator/button
To turn on/off the product, press and hold the On/Off
button for 3 seconds.
After the product has been turned off, only the on/
off indicator will turn on by 100%; all the other indicators will go off. To turn on the product, press and
hold the same button for 3 seconds. The refrigerator will become active and the on/off indicator will
turn on by 50%.
12. *Icematic indicator/button
Press this button to activate/deactivate the icematic.
If the indicator is on by 100%, this means that the
icematic is working. If the indicator is on by 50%,
this means that the icematic is off.
Water flow from water tank will stop
C
when this function is not selected.
However, ice made previously can be
taken from the icematic.
13. *Sabbath Mode
Press this button to activate/deactivate the Sabbath
mode. Once the function has been activated, the
indicator will turn on by 100%. Once the function
has been cancelled, the indicator will turn on by
50%.
14. Vacation Mode indicator/button
Press this button to activate the vacation button; the
vacation mode indicator will turn on by 100%. When
the vacation function is active, “- -” will be displayed
on the Temperature Value display and no active
cooling will be performed in the fridge compartment.
It is not suitable to keep the food in the fridge
compartment when this function is activated. Other
compartments will continue to be cooled according
to their set temperatures.
To cancel this function, press the
function button again. Once the function has been
cancelled, the indicator will turn on by 50%.
Vacation
15. Key Lock indicator
Press quick cooling and vacation buttons
simultaneously for 3 seconds. While pressing the
button, a countdown will start on the temperature
value display. Once the key lock has been activated,
the key lock indicator will turn on by 100% and
the key lock mode will become activated. Buttons
will not function if the Key lock mode is active.
Press quick cooling and vacation buttons again
simultaneously for 3 seconds. While pressing the
button, a countdown will start on the temperature
value display. Once the key lock has been cancelled,
the key lock indicator will turn on by 50% and the
key lock mode will be deactivated.
Activate this function if you want to prevent
changing of the temperature setting of the
refrigerator.
16.Quick freeze function indicator
When the Quick Freeze function has been activated,
the indicator will turn on by 100%. When the
function has been cancelled, the product will return
to its usual settings and the indicator will turn on by
50%.
18 / 31 EN
Refrigerator / User Manual
Operating the product
Quick freeze function button
It is used to activate or deactivate the quick freeze
function.
Press this button to activate or deactivate the quick
freeze function. When you activate the function, the
freezer compartment will be cooled to a temperature
lower than the set value.
Use the quick freeze function when you
C
want to quickly freeze the food placed
in freezer compartment. If you want
to freeze large amounts of fresh food,
activate this function before putting the
food into the product.
If you do not cancel it, Quick Freeze
C
will cancel itself automatically after 4
hours at the most or when the fridge
compartment reaches to the required
temperature.
C
This function is not recalled when
power restores after a power failure.
17. Fridge compartment indicator
When this indicator is active, temperature of
the fridge compartment will be displayed on the
temperature value indicator.
18. Freezer compartment indicator
When this indicator is active, temperature of the
freezer compartment will be displayed on the
temperature value indicator.
19.*Joker compartment indicator
When this indicator is active, temperature of joker
freezer compartment will be displayed on the
temperature value indicator.
Refrigerator / User Manual
19 / 31 EN
Operating the product
5.3. Ice machine
(This feature is optional)
Ice machine allows you to obtain ice from the
product easily.
Using the ice machine
1. Remove the water tank from the fridge compartment.
2. Fill the water tank with water.
3. Replace the water tank. First ice cubes will be ready
in approximately four hours in the ice machine drawer
located in the freezer compartment.
While the water tank is completely
C
filled, you will be able to obtain
approximately 60-70 ice cubes.
C
The water within the tank should be
renewed in every 2-3 weeks.
5.4. Icematic
(This feature is optional)
Icematic allows you to obtain ice from the product
easily.
Using the icematic
1. Take out the icematic pulling it out carefully.
2. Fill the icematic with water.
3. Place the icematic in place. About two hours later,
the ice is ready.
4. To obtain ice, turn the knobs on the ice reservoirs
clockwise by 90˚ degrees. Ice cubes in the reservoirs
will fall down into the ice storage container below.
5. You may take out the ice storage container and
serve the ice cubes.
Do not remove the Icematic from its
C
seating to obtain ice.
If you wish, you may keep the ice
C
cubes in the ice storage container.
The ice storage container is just for
accumulating ice cubes. Do not put
water in it. Otherwise, it will break.
5.5. Ice container
(This feature is optional)
Icematic allows you to obtain ice from the product
easily.
Using the ice container
1. Remove the ice container from the freezer
compartment.
2. Fill the ice container with water.
3. Place the ice container in the freezer
compartment. About two hours later, the ice is
ready.
4. Remove the ice container from the freezer
compartment and bend it over the service plate. Ice
cubes will easily fall down to the service plate.
20 / 31 EN
Refrigerator / User Manual
Operating the product
5.6. Blue light
(This feature is optional)
Crispers of the product are illuminated with a blue
light. Foodstuff stored in the crisper continue their
photosynthesis by means of the wavelength effect of
blue light and thus, preserve their freshness.
5.7. Deodorising Module
(FreshGuard)
(This feature is optional)
The deodorising module eliminates the bad
odours in your refrigerator in a short while
before they pervade the surfaces. Thanks to this
module located in the ceiling of the fresh food
compartment, the air actively passes over the odour
filter, meanwhile bad odour molecules decompose,
and the air that has come out after being cleaned
is given back into the fresh food compartment. This
way, the unwanted odours that may form while
foods are being stored in the refrigerator can be
eliminated before they pervade the surfaces.
This is achieved via the fan, LED and the odour
filter in the module. The deodorising module will get
automatically activated periodically. The noise that
will be heard due to the fan during the periodical
operation is normal. If the door of the fresh food
compartment is opened while the module is active,
the fan will stop temporarily and it will continue to
operate once the door has been closed. In case of
power failure, the deodorising module will start to
operate once the power is back.
Info: To prevent bad odours that may emerge
from the mixing of smells of different foods, we
recommend you to store aromatic foods such as
cheese, olives and delicatessen products in their
sealed packages. For the safety of other foods
stored and to prevent odours, we recommend you to
remove the foods you have realised are spoiled from
the refrigerator as soon as possible.
5.8. Ionizer
(This feature is optional)
The ionizer system in the cooler compartment’s
air duct serves to ionize the air. The negative
ion emissions will eliminate bacteria and other
molecules causing odour in the air.
Refrigerator / User Manual
21 / 31 EN
Operating the product
5.9. Chiller compartment
(This feature is optional)
Use this compartment to store delicatessen that shall
be stored in a lower temperature or meat products
that you will consume in a short time. Do not store
your fruits or vegetables in this compartment.
You can increase the inner volume of your product by
removing any of the chiller compartments.
To remove, just pull the compartment until it stops,
and then lift it and pull towards yourself.
5.10. Crisper
Crisper of the refrigerator is designed specially
to keep the vegetables fresh without loosing their
humidity. For this purpose, cool air circulation is
intensified around the crisper in general. Store your
fruits and vegetables in this compartment. To preserve
green leafy vegetables for a longer time, do not store
them near fruits.
5.11. Movable Middle Section
Movable middle section is intended to prevent the
cold air inside your refrigerator from escaping outside.
1- Sealing is provided when the gaskets on the door
presses on the surface of the movable middle section
while the fridge compartment doors are closed.
2- Another reason that your refrigerator is equipped
with a movable middle section is that it increases
the net volume of the fridge compartment. Standard
middle sections occupy some non-usable volume in
the refrigerator.
3-Movable middle section is closed when the left door
of the fridge compartment is opened.
4-It must not be opened manually. It moves under
the guidance of the plastic part on the body while the
door is closed.
5.12. Using the water dispenser
(This feature is optional)
It is normal for the first few glasses
C
of water taken from the dispenser to
be warm.
If the water dispenser is not used for
C
a long period of time, dispose of first
few glasses of water to obtain fresh
water.
1. Push in the lever of the water dispenser with your
glass. If you are using a soft plastic cup, pushing
the lever with your hand will be easier.
22 / 31 EN
Refrigerator / User Manual
Operating the product
2. After filling the cup up to the level you want,
release the lever.
Please note, how much water flows
C
from the dispenser depends on how far
you depress the lever. As the level of
water in your cup / glass rises, gently
reduce the amount of pressure on the
lever to avoid overflow. If you slightly
press the arm, the water will drip; this
is quite normal and not a failure.
Use clean drinking water only.
C
Capacity of the water tank is 3 liters;
C
do not overfill.
5.13. Filling the water dispenser's tank
Water tank filling reservoir is located inside the door
rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
Do not fill the water tank with any
C
other liquid except for water such as
fruit juices, carbonated beverages or
alcoholic drinks which are not suitable
to use in the water dispenser. Water
dispenser will be irreparably damaged
if these kinds of liquids are used.
Warranty does not cover such usages.
Some chemical substances and
additives contained in these kinds of
drinks/liquids may damage the water
tank.
Refrigerator / User Manual
23 / 31 EN
Operating the product
5.14. Cleaning the water tank
1. Remove the water filling reservoir inside the door
rack.
2. Remove the door rack by holding from both sides.
3. Grab the water tank from both sides and remove it
with an angle of 45°C.
4. Remove the cover of the water tank and clean
the tank.
Components of the water tank and
C
water dispenser should not be washed
in dishwasher.
5.15. Drip tray
Water that dripped while using the water dispenser
accumulates in the spillage tray.
Remove the plastic filter as shown in the figure.
With a clean and dry cloth, remove the water that
has accumulated.
24 / 31 EN
Refrigerator / User Manual
Operating the product
5.16. Everfresh (Humiditycontrolled crisper)
(This feature is optional)
Thanks to the humidity-controlled crisper, you can
store fruits and vegetables under ideal humidity
conditions for a longer time. You can control the
humidity inside the refrigerator thanks to the
humidity setting system with 3 options, which
is located on the front side of the crisper. We
recommend you to select the vegetable option when
storing vegetables only, fruit option when storing
fruits only, and mix option when storing fruits and
vegetables at the same time.
To benefit from the humidity control system and
increase the storage life of foods, we recommend
you not to store your fruits and vegetables in plastic
bags. If the vegetables are left inside their bags,
this will cause them to decompose in a short period
of time. It is especially recommended not to store
cucumber and broccoli in plastic bags. In case
contacting with other vegetables is not preferred for
hygiene concerns, use a perforated brown bag and
other similar packaging materials instead of a bag.
While the vegetables are being placed, specific
gravity of the vegetables should be taken into
consideration. Heavy and hard vegetables should be
put at the bottom of the crisper and the lightweight
and soft vegetables should be placed over.
Do not place together the pear, apricot, peach, etc.
and apple in particular which have a high level of
generation of ethylene gas in the same crisper with
the other vegetables and fruit. The ethylene gas
which is emitted by these fruit may cause the other
fruit to ripen faster and decompose in a shorter
time.
SE BZE Lİ K
Refrigerator / User Manual
25 / 31 EN
Operating the product
5.17. Freezing fresh food
• In order to preserve the quality of the food, it
shall be frozen as quickly as possible when it is
placed in the freezer compartment, use the fast
freezing feature for this purpose.
• You may store the food longer in freezer
compartment when you freeze them while they
are fresh.
• Pack the food to be frozen and close the packing
so that it would not allow entrance of air.
• Ensure that you pack your food before putting
them in the freezer. Use freezer containers, foils
and moisture-proof papers, plastic bags and
other packing materials instead of traditional
packing papers.
• Label each pack of food by adding the date
before freezing. You may distinguish the
freshness of each food pack in this way when
you open your freezer each time. Store the food
frozen before in the front side of compartment to
ensure that they are used first.
• Frozen food must be used immediately after they
are thawed and they should not be re-frozen.
• Do not freeze too large quantities of food at one
time.
Freezer
Compartment
Setting
-18°C4°CThis is the normal recommended setting.
-20, -22 or
-24°C
Quick Freeze4°C
-18°C or colder2°C
Fridge
Compartment
Setting
4°C
Remarks
These settings are recommended when the ambient temperature exceeds
30°C.
Use when you wish to freeze your food in a short time. Your product will
return to its previous mode when the process is over.
Use these settings if you think that your fridge compartment is not cold
enough because of the hot ambient conditions or frequent opening and
closing of the door.
26 / 31 EN
Refrigerator / User Manual
Operating the product
5.18. Recommendations for
preserving the frozen food
Compartment shall be set to -18°C at least.
1. Put packages in the freezer as quickly as
possible after purchase without allowing the
to thaw.
2. Check whether the "Use By" and "Best Before"
dates on the packaging are expired or not
before freezing it.
3. Ensure that the package of the food is not
damaged.
5.19. Deep-freeze information
According to IEC 62552 standards, the product
shall freeze at least 4.5 kg of food at 25°C ambient
temperature to -18°C or lower within 24 hours for
every 100-litres of freezer volume.
It is possible to preserve the food for a long time
only at -18°C or lower temperatures.
You can keep the freshness of food for many months
(at -18°C or lower temperatures in the deep freeze).
Foods to be frozen should not be allowed to come in
contact with the previously frozen items to prevent
them from getting thawed partially.
Boil the vegetables and drain their water in order to
store vegetables for a longer time as frozen. After
draining their water, put them in air-proof packages
and place them inside the freezer. Food such as
bananas, tomatoes, lettuce, celery, boiled eggs,
potatoes are not suitable for freezing. When these
foods are frozen, only their nutritional value and
taste shall be affected negatively. They shall not be
spoiled so that they would create a risk for human
health.
5.20. Placing the food
Freezer
compartment
shelves
Refrigerator
compartment
shelves
Door shelves
of fridge
compartment
CrisperVegetables and fruits
Fresh zone
compartment
Various frozen food such
as meat, fish, ice cream,
vegetables and etc.
Food in pans, covered plates
and closed containers, eggs (in
closed container)
Small and packaged food or
beverage
Delicatessen (breakfast food,
meat products that shall be
consumed in a short time)
Refrigerator / User Manual
5.21. Door open warning
(This feature is optional)
An audio warning signal will be given when the
door of your product is left open for 1 minute. This
warning will be muted when the door is closed or
any of the display buttons (if any) are pressed.
5.22. Illumination lamp
LED lamps are used as illumination lamps. Contact
authorized service in case of any problem with this
type of light.
The lighting lamps used in this product are not
intended for house lighting and not suited to this
purpose. The purpose of the lighting lamps in your
fridge and/or freezer is to allow you to load your
foods in a comfortable and safe manner.
27 / 31 EN
6Care and Cleaning
Service life of the product will extend and frequently
encountered problems will decrease if the product is
cleaned periodically.
B
WARNING: Switch off the product
before cleaning.
WARNING: It is recommended to
B
clean the condenser every six months
using gloves. You must not use
vacuum cleaners.
• Never use gasoline, benzene or similar substances
for cleaning purposes.
• Never use any sharp abrasive instruments, soap,
household cleaners, detergent or wax polish for
cleaning.
• Dissolve one teaspoon of carbonate in half liter
of water. Soak a cloth in the solution and wring it
thoroughly. Wipe the interior of the refrigerator with
this cloth and the dry thoroughly.
• Make sure that no water enters the lamp housing or
other electrical parts.
• If you will not use the refrigerator for a long time,
unplug it, remove all food inside, clean it and leave
the door ajar.
• Check regularly that the door gaskets are clean. If
not, clean them.
• Take out all items in the product to remove the door
and body shelves.
• Remove the door shelves by pulling them up. Slide
the shelves downwards to re-install them after
cleaning.
• Never use chloric cleaning agents or water to
clean outer surfaces or chrome-coated parts of the
product. Chlorine causes abrasion on such metal
surfaces.
• For non-No Frost products, water drops and frosting
up to a fingerbreadth occur on the rear wall of the
Fridge compartment. Do not clean it; never apply oil
or similar agents on it.
• Only use slightly damp microfiber cloths to clean
the outer surface of the product. Sponges and other
types of cleaning cloths may scratch the surface.
6.1. Avoiding Bad Odours
Materials that may cause odour are not used in the
production of our refrigerators. However, odour may be
emitted if foods are stored improperly or if the inner
surface of the product is not cleaned as required. Please
consider the following to avoid this problem:
• It is important that the refrigerator is kept clean.
Food residuals, stains, etc. can cause odour. For
this reason, clean your refrigerator with carbonate
solved in water every 15 days. Never use detergents
or soap.
• Keep your foods in closed vessels. Microorganisms
emitted from vessels without a cover may cause
unpleasant odours.
• Never keep expired or spoiled foods in your
refrigerator.
6.2. Protection of plastic surfaces
Do not put liquid oils or oil-cooked meals in your
refrigerator in unsealed containers as they damage
the plastic surfaces of your refrigerator. If oil is spilled
or smeared onto the plastic surfaces, clean and rinse
the relevant part of the surface with warm water
immediately.
6.3. Cleaning the Inner Surface
To clean the inner surfaces and all removable parts,
wash them with a mild solution comprising soap, water
and carbonate. Rinse and dry thoroughly. Prevent the
water from contacting the lighting means and control
panel.
ATTENTION:
Do not use vinegar, rubbing
alcohol or other alcohol-based
A
cleaning agents on any of the
inner surfaces.
6.4. Stainless Steel Outer Surfaces
Use a stainless steel cleaning agent that is non-abrasive
and apply it with a lint-free, soft cloth. For polishing,
wipe the surface softly with a damp microfiber cloth and
use dry wash-leather. Always follow the strands of the
stainless steel.
28 /31 EN
Refrigerator / User Manual
6Care and Cleaning
6.5. Cleaning Products with Glass Doors
Remove the protection foil on the glass.
There is a coating on the surface of the glass. This
coating minimises stain formation and ensures
that stains and dirt are cleaned easily. Glasses
that are not protected by a coating might be exposed
to permanent bonding of organic or inorganic, air or
waterborne pollutants such as limescale, mineral salts,
unburned hydrocarbons, metal oxides an silicons,
which lead to stains and physical damage in a short
time. Despite regular washing, the glass becomes very
hard to keep clean, though not impossible. As a result,
the clarity and good appearance of the glass reduces.
Hard and abrasive cleaning compounds and methods
increase these defects even further and accelerate the
deterioration process.
*Non-alkali, non-abrasive and water-based cleaning
products must be used for routing cleaning procedures.
For the coating to have long service life, alkali or
abrasive substances must not be used during cleaning
processes.
These glasses were subject to a tempering process to
increase their impact and breakage resistance.
As an additional safety measure, there is a safety film on
the back surfaces of the glasses to ensure that they will
not harm the environment in case of breakage.
Refrigerator / User Manual
29 / 31 EN
Loading...
+ 176 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.