Beko DPU 8360 W User Manual
Condenser
Sensor Dryer
Dry & Save
DPU 8360 W
Please read this user manual first!
Dear Customer,
We hope that you get the best results from the product which has been manufactured
in state-of-the-art plants and passed through a strict quality control procedure.
Therefore, please read the entire user manual carefully before using the product and
keep it as a reference for future use. In case of transferring the product to someone
else, give the manual as well.
The user manual will help you use your product in a fast
and safe way.
• Read the user manual before installing and starting your product.
• Always follow the safety instructions.
• Keep this user manual within easy reach for future reference.
• Read also the other documents supplied with the product.
Remember that this user manual is also applicable for several other models.
Differences between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
Read the instructions.
Important information or useful hints about usage.
C
Warning for hazardous situations with regard to life and property.
A
Warning for electric shock.
B
Warning for fire hazard.
Warning for hot surfaces.
2960310462_EN/260911.1754
This appliance’s packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose. Your appliance
also contains a great amount of recyclable material. It is marked with this label to indicate
the used appliances that should not be mixed with other waste. This way, the appliance
recycling organised by your manufacturer will be done under the best possible conditions,
in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment. Contact your town hall or your retailer for the used appliance collection points
closest to your home. We thank you doing your part to protect the environment.
TABLE OF CONTENTS
1 Dryer 4
Overview .............................................4
Technical specifications .......................5
2 Important safety
instructions 6
General safety .....................................6
Intended use .......................................8
Children's safety ..................................8
3 Installation 9
Appropriate installation location ...........9
Removing the transportation safety
assembly .............................................9
Under counter installation ....................9
Mounting over a washing machine .....10
Connecting to the drain .....................10
Adjusting the feet ...............................10
First use ............................................11
Disposing of packaging material ........11
Transportation of the product .............11
Disposing of the old product ..............11
Warnings about sounds .....................11
4 Electrical Connection 13
Attention! ...........................................13
Electrical requirements .......................13
Fitting a different plug .......................13
Washer/dryer combination .................14
Main programmes .............................19
Additional programmes .....................19
Auxiliary functions ..............................22
Warning symbols ...............................22
Starting the programme .....................24
Progress of programme .....................24
Child-proof Lock ................................24
Changing the programme after it has
started ...............................................24
Cancelling the programme .................25
End of programme ............................26
7 Maintenance and cleaning 27
Lint Filter / Loading Door Inner Surface 27
Cleaning the sensors ........................27
Draining the water tank ......................28
Cleaning the filter drawer ..................28
Cleaning the evaporator .....................30
8 Troubleshooting 31
9 Guarantee 33
What is covered? ...............................33
What is not covered? .........................33
Important notes .................................33
10 Service 34
5 Preparations for drying 15
Things to be done for energy saving ..15
Laundry suitable for drying in the
machine ............................................15
Laundry unsuitable for drying in the
machine ............................................15
Preparing laundry for drying ...............16
Correct load capacity ........................16
Loading the laundry ...........................16
6 Selecting a Programme and
Operating Your Machine 18
Preparing the machine .......................19
Programme selection .........................19
EN
3
1 Dryer
Overview
11
1
10
9
8
7
1. Top panel
2. Control panel
3. Loading door
4. Kick plate opening tab
5. Ventilation grids
6. Adjustable feet
2
3
4
5
6
7. Kick plate
8. Type label
9. Lint filter
10. Water tank drawer
11. Power cable
EN
4
Technical specifications
Height (adjustable) 84.6 cm
Width 59.5 cm
Depth 59.8 cm
Capacity (max) 8 kg
Weight (net) 49 kg
Voltage
See type labelPower
Main Model Code
Type label is behind the loading door.
Specifications of this appliance may change without notice to improve the quality of the
product. Figures in this manual are schematic and may not match your product exactly.
Values stated on the machine labels or in the documentation accompanying it are
obtained in laboratory in accordance with the relevant standards. Depending on
operational and environmental conditions of the appliance, values may vary.
EN
5
2 Important safety instructions
This section contains safety instructions
that will help protect from risk of personal
injury or property damage. Failure to
follow these instructions shall void any
warranty.
General safety
• Never place the product on a carpet-
covered floor; otherwise, lack of
airflow beneath the machine will
cause electrical parts to overheat.
This will cause problems with your
product.
• Do not operate the product if the
power cable / plug is damaged. Call
the Authorized Service Agent.
• Do not make any changes on the
plug supplied with the product. If it is
not compatible with the socket, have
a qualified electrician change the
socket with a suitable one.
• Never touch the plug with wet hands!
Never unplug by pulling on the cable,
always pull out by grabbing the plug.
• Connect the product to a grounded
outlet protected by a fuse of suitable
capacity as stated in the technical
specifications table.
• Power cable of this product is
equipped with a conductor and
a grounding plug that allows for
grounding the product. This plug
must be inserted into a socket
which is installed and grounded in
accordance with the local laws and
regulations. Grounding installation
decreases the risk of electric shock
by opening a path with low resistance
for the electricity flow in case of a
malfunction or failure. Do not neglect
to have the grounding installation
made by a qualified electrician.
If you have any suspect about
the grounding installation, have it
• The product should not be plugged
• Always have the repair procedures
• Do not use electrical devices in the
• You must provide enough ventilation
• Items cleaned or washed with
• Do not dry the laundry cleaned with
• Underwear that contains metal
• Never attempt to repair the product
checked by a qualified electrician or
the Authorized Service Agent. Our
company shall not be liable for any
damages that will arise when the
product is used without grounding in
accordance with the local regulations.
in during installation, maintenance,
cleaning and repair works.
carried out by the Authorized Service
Agent. Manufacturer shall not be
held liable for damages that may
arise from procedures carried out by
unauthorized persons.
product.
in order to prevent gases exiting from
devices operating with other types of
fuels including the naked flame from
accumulating in the room due to the
back fire effect.
gasoil/fuel oil, dry-laundry solvents
and other combustible or explosive
materials as well as the items that are
contaminated or spotted with such
materials should not be dried in the
product since they emit flammable or
explosive vapor.
industrial chemicals in the dryer.
reinforcements should not be dried in
the dryer. Dryer can get damaged if
metal reinforcements come loose and
break off during drying.
yourself. Do not perform any
repair or replacement procedures
on the product even if you know
or have the ability to perform the
EN
6
required procedure unless it is
clearly suggested in the operating
instructions or the published service
manual. Otherwise, you will be
putting your life and others' lives in
danger.
• For failures that you cannot remedy
by applying the procedures in safety
instructions, turn off and unplug
the product and call the Authorized
Service Agent.
• Do not reach into the machine when
the drum is spinning.
• Do not use extension cords, multi-
plugs or adaptors to connect the
dryer to power supply in order to
decrease the risk of fire and electric
shock.
• Never wash the product by spreading
or pouring water onto it! There is the
risk of electric shock!
The final step of the drying
programme, namely the cool-down
step is performed without applying
heat to ensure that the laundry items
are kept at a temperature that will
not damage them. If you open the
loading door before the cool-down
step completes, hot vapour will come
out.
Never stop the dryer before the
A
programme completes. If you must
do this, remove all laundry quickly
and lay them out to a suitable place
to dissipate the heat.
• Always clean the lint filter before or
after each loading. Never operate the
dryer without the lint filter installed.
• Clean ventilation grid of the product
regularly. Do not allow fibre, dust
and dirt accumulation around the
ventilation grid and at adjacent areas.
• Power cable plug must be within easy
reach after installation.
• Do not dry unwashed items in the
dryer.
• Items soiled with cooking oils,
acetone, alcohol, fuel oil, kerosene,
stain removers, turpentine, paraffin
and paraffin removers must be
washed in hot water with plenty of
detergent before being dried in the
dryer.
• Garments or pillows bolstered with
rubber foam (latex foam), bathing
caps, water resistant textiles,
materials with rubber reinforcement
and rubber foam pads should not be
dried in the dryer.
• Do not use fabric softeners and
anti-static products unless they are
recommended by the manufacturers
of the relevant product.
• Use softeners, anti-static products
and etc. in accordance with the
instructions of their manufacturers.
• Do not install the product behind a
door with a lock, sliding door or a
hinged door which can strike the
product.
• Do not install or leave the dryer in
places where it will be exposed to
outdoor conditions.
• Your product can be operated at
temperatures between +5°C and
+35°C. If the operating conditions fall
outside of this range, operation of the
product will be adversely affected and
it can get damaged.
• Do not tamper with the controls.
• Unplug the product when it is not in
use.
• Remove the loading door of
the drying compartment before
decommissioning or disposing of the
product.
• Check all garments before loading
and make sure that there is no any
lighters, coins, metal pieces, needles,
and etc. in their pockets or on them.
EN
7
• Make sure that the pets do not enter
into the product. Check the drum of
the product before using it.
• Make sure that original spare parts
and accessories are used during
maintenance works.
• Do not lean on the loading door when
it is open. The product may tip over.
• When your machine is not in use
or when you unload the laundry
after completion of drying process,
turn the machine off with the On/
Off button. In cases where the On/
Off button is in On position (while
the machine is energized), keep the
loading door closed.
Intended use
• This product has been designed for
domestic use. It should not be used
for other purposes.
• Product must only be used for
drying of textiles that are marked
accordingly.
• Dry only those articles in your product
that are stated in this manual.
• This product is not intended to be
used by persons with physical,
sensory or mental disorders or
unlearned or inexperienced people
(including children) unless they are
attended by a person who will be
responsible for their safety or who will
instruct them accordingly for use of
the product.
Children's safety
• Electrical products are dangerous for
the children. Keep children away from
the product when it is operating. Do
not let them tamper with the product.
• Do not allow children sit/climb on or
enter in the product.
• Do not forget to close the loading
door when leaving the room where
the product is located.
• Packaging materials are dangerous
to children. Keep the packaging
materials out of reach of children or
dispose them by classifying according
to waste directives.
EN
8
3 Installation
To make the product ready for use,
make sure that the electricity and water
drainage system are appropriate before
installation. If they are not, call a qualified
technician and plumber to have any
necessary arrangements carried out.
Preparation of the product’s location
C
as well as the electrical and waste
water installations is the customer’s
responsibility.
Manufacturer shall not be held
C
liable for damages that may arise
from procedures carried out by
unauthorized persons.
Prior to installation, visually check if
A
the product has any defects on it. If
so, do not have it installed. Damaged
products cause risks for your safety.
The appliance should be transported
A
only in a vertical upright position.
If during the course of transport the
appliance has to be transported
horizontally, it must only be laid on
its right hand side. After bringing it
to upright position,it must not be
operated for at least 12 hours to
allow the system to settle.
Failure to comply with the above
instructions could result in damage
occurring to the appliance. The
manufacturer will not be held
responsible if these instructions are
disregarded.
Appropriate installation
location
• Install the product on a stable and
level surface.
• Dryer is heavy. Do not move it by
yourself.
• Operate your product in a well
ventilated, dust-free environment.
• Do not block the air ducts in front of
and under the product with materials
such as long pile rugs or wooden
plinths.
• Do not install the product behind a
door with a lock, sliding door or a
hinged door which can strike the
product.
• Once the product is installed, it
should stay at the same place where
its connections have been made.
When installing the product, make
sure that the rear wall of it does
not touch anywhere (tap, socket,
etc.). Also pay attention to select an
installation location which you will not
be required to change afterwards.
• Place the product at least 1.5
cm away from the edges of other
furniture.
Do not place the product on the
B
power cable.
Removing the transportation
safety assembly
Remove the transportation safety
A
assembly before using the product for
the first time.
1. Open the loading door.
2. There is a nylon bag inside the drum
that contains a piece of styrofoam.
Hold it from its section marked with
XX XX.
3. Pull the nylon towards yourself and
remove the transportation safety
assembly.
Make sure that no part of the
A
EN
9
transportation safety assembly
remains inside the drum.
Under counter installation
• This product can be installed under a
counter if the height of the counter is
sufficient.
Never operate the dryer without the
A
top trim is in place.
Dryer Depth 60 cm 54 cm
Stock
number of
under-bench
installation
part
• Leave at least 3 cm of space around
the sides and the rear wall of the
product when installing it under a
counter or in a cupboard.
2979600100 2973600100
Mounting over a washing
machine
• A fixing device should be used
between the two machines when
installing the dryer above a washing
machine. The fixing device can
usually be obtained from a specialist
retailer.
• Total weight of the washing machine
and the dryer -with full load- when
they are placed on top of each other
reaches to approx. 180 kilograms.
Place the products on a solid floor
that has sufficient load carrying
capacity!
Connecting to the drain
In products equipped with condenser
unit, water accumulates in the water tank
during the drying cycle. You should drain
accumulated water after each drying
cycle.
You can directly drain accumulated water
through the water drain hose supplied
with the product instead of periodically
draining the water collected in the water
tank.
Connecting the water drain hose
1. Pull hose in the product by hand in
order to disconnect it from where it is
connected. Do not use any tools to
remove the hose.
2. Connect one end of the drain hose
supplied separately with the product
to the connection point from where
you removed the hose of the product
in previous step.
10
EN
3. Connect the other end of the drain
hose directly to the wastewater drain
or to the washbasin.
Hose must be fixed in every type
A
of connection. Your house will be
flooded if the hose comes loose
during water discharge.
Water drain hose should be attached
C
to a height of maximum 80 cm.
Make sure that the water drain hose
C
is not stepped on and it is not folded
between the drain and the machine.
Adjusting the feet
In order to ensure that the product
operates more silently and vibration-free,
it must stand level and balanced on its
feet. Balance the machine by adjusting
the feet.
Turn the feet to left or right until the
machine stands level and firmly.
in accordance with recycled waste
instructions. Do not dispose of them with
normal domestic waste.
Transportation of the product
1. Unplug the product before
transporting it.
2. Remove the water drain (if any).
3. Drain the water in the product
completely.
We recommend carrying the product
A
in upright position. If it is not possible
to carry the machine in the upright
position, we recommend carrying
it by tilting towards the right side
when looked from the front. After the
product is moved to its new place,
you should wait for 12 hours before
starting it.
Never remove the adjustable feet
C
from their housings.
First use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections “Important safety instructions”
and “Installation”.
Disposing of packaging
material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place away from reach of the
children.
Packaging materials of the product are
manufactured from recyclable materials.
Dispose of them properly and sort
11
EN
Loading...