VINTAGE TUBE OVERDRIVE TO800
Vintage Tube -Sound Overdrive E ects Pedal
Thank you for show ing your condence in us by purchasing the BEHRINGER VINTAGE TUBE
OVERDRIVE TO800. This high-quality ee cts pedal is ideally suited for giving electric guitar s maximum
exibilit y with classic overdrive sounds that capture ever y nuance of your playing—from smooth
overdrive to screaming tube sounds. Thanks to its high-per formance features you get tube-like
vintage- style distortion, smooth sus tain and super fat tone.
1. Controls
(4)
(1)
(7)
(2)
(3)
(6)
(5)
(1) The DRIVE control adjusts the intensity of the overdrive eect.
(2) The LEVEL control adjust s the output level.
(3) The TONE control allows you to shape your overall sound.
(4) The ON /BATT LED illuminates when the eect is ac tivated. It also serves as a battery level indicator.
(5) Use the footswitch to ac tivate/deactivate the eect.
(6) Use this ¼" TS IN connector to plug in the instrument c able.
(7) The ¼" TS OUT connector sends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V
batter y, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊ The TO800 has no on/o switc h. As soon as you inser t the jack into the in connector,
the TO800 begins running. When not using the TO800, remove the jack from the
in connec tor. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
VINTAGE TUBE OVERDRIVE TO800
2. Safety Instructions
Do not use near water, or install near heat s ources. Use only authorize d attachments/accessories.
Do not service produc t yourself. Contact our qualied servicing personnel for servicing or rep airs,
especially w hen power supply cord or plug is damaged.
3. Warranty
Please regis ter your new BEHRINGER equipment right after your purchas e by visiting
http://behringer.com and read the terms and conditions of our warranty care fully.
4. Specications
In
Connec tor ¼" TS
Impedanc e 500 kΩ
Out
Connec tor ¼" TS
Impedanc e 1 kΩ
Power Supply
9 V𝌂, 100 mA regulate d
PSU-SB-CN 220 VAC adaptor Chi na
BEHRINGER
PSU-SB-EU 230 VAC adaptor Eur ope
BEHRINGER
PSU-SB-JP 100 VAC adaptor Jap an
BEHRINGER
PSU-SB-SAA 240 VAC adaptor Aust ralia
BEHRINGER
PSU-SB-UK 2 40 VAC adaptor UK
BEHRINGER
PSU-SB-UL 115 VAC adaptor USA
BEHRINGER
Power conne ctor 2 mm DC jack,
negative center
Batter y 9 V type 6LR 61
Power consumption 30 mA
Physical/Weight
Dimensio ns approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 5 4 x 70 x 123 mm
Weight approx. 0.73 lb s / 0.33 kg
BEHRING ER is constant ly strivin g to maintain the
highes t professio nal standard s. As a result of t hese eff orts,
modifi cations may be m ade from tim e to time to exis ting
produc ts withou t prior notice . Specific ations and app earance
may there fore diff er from thos e listed or show n.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands