Behringer SP400 User Manual

SUPER PHASE SHIFTER SP400
Ultimate Ph ase Shifter Ee cts Pedal
Thank you for show ing your condence in us by purchasing the BEHRINGER SUPER PHA SE SHIFTER SP400. This Phaser eects p edal delivers the whole his tory from vintage to modern phase shifting eec ts— at the touch of a fo ot switch. Experience sounds fr om classic multi-stage p hasers to new swirling up- and downward moving sounds.
1. Controls
(9)
(4)
(2)
(1)
(3)
(6)
(5)
(7)
(8)
(1) Select the eec t mode via the MODE switch:
from vint age phaser sounds to deep and p owerful phasing ee cts.
FALL: This mode give s you the impression of a constantly falli ng phasing sound.
RISE: This mode sounds like a permanently rising phasing sound.
STEP: In this mode, th e lter modication occu rs up and down in dened ste ps.
(2) RES(onance) controls the intensity of the eect.
(3) With DEPTH you can set the modulation depth.
(4) RAT E determines the modulation speed. RATE can also be entered using the t ap function of the
foot switch or via an external expression pedal.
(5) Use the ¼" TS IN connector to plug in the ins trument cable.
(6) The ¼" TS OUT connector s ends the signal to your amp or other eect s devices.
(7) The ¼" TRS EX P/CTL connector can be used to connec t two dierent type s of pedals:
• Use a foot swi tch instead of the pedals’ fo ot switch (8) to tap the eect R ATE.
• Use an expression pedal to modulate the rate from 0 (modulation is stoppe d) to the maximum
value which is de termined by the position o f the RATE knob (4).
SUPER PHASE SHIFTER SP400
(8) Use the foot switch to activate/deact ivate the eect. When pressing the foot switch 2 s econds
or longer, you can tap in the eec t rate (ON/BATT LED ashes).
(9) The ON /BATT LED illuminates when the eect is activated. It also serves as a batter y
level indicator. If the Tap function is active, the LED ashes.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located un derneath the pedal cover. To install or rep lace the 9 V battery (not included), pres s the hinges with a ballpoint p en and remove the pedal cover. Be care ful not to scratch the uni t.
The SP400 has no On/O switc h. It is operable as soon as you insert a plug into the
IN connec tor. Disconnect the plug, if you don’t use the SP400. In doing so, you can extend the life time of the bat tery.
The SERIAL NUMBER is located at the underside.
In rare cases interferences of the normal function may appear by external inuence
(e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amp liers and disconnect the input connector briey to restart the application.
2. Safety Instructions
Do not use near water, or install near heat s ources. Use only authorize d attachments/accessories. Do not service produc t yourself. Contact our qualied servicing personnel for servicing or rep airs, especially w hen power supply cord or plug is damaged.
3. Warranty
Please regis ter your new BEHRINGER equipment right after your purchas e by visiting http://behringer.com and read the terms and conditions of our warranty care fully.
4. Specications
In
Connec tor ¼" TS; 500 kOhm
Out
Connec tor ¼" TS; 1 kOhm
EXP/ CTL
Connec tor ¼" TRS; 500 kOhm
Power Supply
9 V𝌂, 100 mA regulate d
BEHRINGER PSU-SB
USA/Canad a 120 V~, 60 Hz
China/Ko rea 220 V~, 50/60 Hz
Europe/Aust ralia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands
Power connec tor 2 mm DC jack, n egative center
Batter y 9 V type 6LR 61
Power consumption 60 mA
Physical/Weight
Dimensio ns approx. 2  ⁄ x 2 ¾ x 4 ⁄" (H x W x D) appro x. 54 x 70 x 123 mm
Weight app rox. 0.73 lbs / 0.33 kg
BEHRING ER is constant ly strivin g to maintain the highes t professio nal standard s. As a result of t hese eff orts, modifi cations may be m ade from tim e to time to exis ting produc ts withou t prior notice . Specific ations and app earance may there fore diff er from thos e listed or show n.
Loading...