Behringer SM400 User Manual

SUPER METAL SM400
Thank you for showing your confidence in us by purchasing the BEHRINGER SUPER METAL SM400. This high-quality effects pedal enables you to produce super thick, tube­like distortion plus endless sustain. Thanks to its high-performance features you can achieve the typical hard rock or heavy metal distortion sounds.
1. CONTROLS
Top view
The LEVEL control adjusts the output level. The LOW control allows you to boost/cut the low-frequency range. The HIGH control allows you to boost/cut the high-frequency range. The DIST control adjusts the amount of distortion effect and the length of the resulting
sustain. High distortion settings will allow for extremely long sustaining tones. The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator. Use the footswitch to activate/deactivate the effect. Use this 1/4" TS IN connector to plug in the instrument cable. The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
The SM400 has no on/off switch. As soon as you insert the plug into the IN
connector, the SM400 is on. When not in use, remove the plug from the IN connector. This extends the life of the battery.
The SERIAL NUMBER is located at the underside.
SUPER METAL SM400
2. WARRANTY
For our current warranty terms, please refer to our website at http://www.behringer.com.
3. SPECIFICATIONS
In
Connector 1/4" TS Impedance 500 k
Out
Connector 1/4" TS Impedance 1 k
Power supply 9 V , 100 mA regulated
Power connector 2 mm DC jack, negative center Battery 9 V type 6LR61 Power consumption 30 mA Dimensions (H x W x D) approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") Weight approx. 0.33 kg (0.73 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
BEHRINGER PSU-SB USA/Canada 120 V~, 60 Hz Europe/U.K./Australia 230 V~, 50 Hz China 220 V~, 50 Hz Korea 220 V~, 60 Hz Japan 100 V~, 50/60 Hz
4. SAFETY INSTRUCTIONS
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice sólo accesorios y aditamentos autorizados. No intenté reparar el producto usted mismo. Contacte a nuestro personal técnico cualificado para servicio y reparaciones, especialmente cuando la
fuente o el cable de alimentación estén dañados.
Не эксплуатируйте прибор вблизи от источников воды и тепла. Применяйте только авторизованные дополнительные устройства. Никогда не ремонтируйте прибор самостоятельно. Ремонт может производить только квалифицированный специализированный персонал, особенно при повреждениях сетевого провода или сетевой вилки.
Die deutsche Anleitung ist erhältlich @ www.behringer.com Manuel francophone en téléchargement sur www.behringer.com Manual en español disponible en www.behringer.com Manuali italiani disponibili @ www.behringer.com
Русскоязычное руководство @ www.behringer.com
Polska instrukcja dostępna jest pod adresem @ www.behringer.com
Nederlandse handleiding beschikbaar @ www.behringer.com Suomenkielinen käyttöohje saatavilla osoitteesta www.behringer.com Svensk manual finns tillgänglig på www.behringer.com Dansk vejledning findes på @ www.behringer.com Manual português disponível @ www.behringer.com
Еллзнйкь егчейсЯдйп хрЬсчей дйбиЭуймп уфз дйеэихнуз www.behringer.com
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. BEHRINGER, the BEHRINGER logo and JUST LISTEN are trademarks of BEHRINGER. ALL RIGHTS RESERVED. © 2006 BEHRINGER International GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany . T el. +49 2154 9206 0, Fax +49 2154 9206 4903
Loading...