Behringer RX1202FX Specification Sheet
Technical Specications
EURORACK PRO RX1202FX
Premium 12-Input Mic/Line Rack Mixer with
XENYX Mic Preampliers, British EQ's and Multi-FX Processor
EURORACK PRO RX1202FX Technical Specifications
2
EURORACK PRO RX1202FX
Premium 12-Input Mic/Line Rack Mixer with XENYX Mic Preampliers,
British EQ's and Multi-FX Processor
Premium ultra-low noise, high headroom analog 3U rack mount mixer
8 state-of-the-ar t XENYX Mic Preamps comparable to stand-alone boutique preamps
Neo-classic “British” 2-band EQs for warm and music al sound
Studio-grade FX processor wit h 100 awesome preset s including reverb, chorus, anger, delay, pitch shifter and various multi-eects
Switchable +4 8 V phantom power for condenser microphones
4 additional balanced high-headroom line inputs
CD/Tape inputs assignable to Main mix or Control Room/Phones outputs
2 Aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for internal FX or as e xternal send
Separate Cont rol Room, Phones and stereo CD/tape outputs
Balanced Main mi x outputs with gold-plated XLR conne ctors
Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
“Planet Earth” switching power supply for maximum exibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB gain
Specications
Mono Inputs
MIC (IMP Invisible Mic Preamp)
Type XLR, electr. balanced
Mic E.I.N. (20 Hz – 20 kHz)
@ 0 source resis tance -132 dB / -134 dB A-weighted
@ 50 source resis tance -130 dB / -132 dB A-weighted
@ 150 source resistance -128 dB / -130 dB A-weighted
Frequency response <10 Hz – 200 kHz
Gain range +10 to +60 dB
Stereo Inputs
Type ¼” TRS connec tor, elec tronically balanced
Impedance approx. 20 k b alanced
approx. 10 k unbalanced
Max. input level +22 dBu
Insert
Type ¼" TRS connector (Tip=Send, Ring=Return)
Auxiliary Inputs
CD/TAPE IN
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 k b alanced
Signal-to-noise ratio -110 dB / -112 dB A-weighted
Distortion (THD+N) 0.003%, A-weighted
Line In
Type ¼" TRS connector, electronically balance d
Impedance approx. 20 k b alanced
approx. 10 k unbalanced
Type RCA connectors, unbalanced
Impedance approx. 20 k
Max. input level +22 dBu
Aux Return
Type ¼” TRS connec tor, balanced
Impedance approx. 20 k b alanced
approx. 10 k unbalanced
Max. input level +22 dBu
Loading...