Behringer NU12000DSP Product Information

Product Information Document
Class-D
Class-AB
Output Power
Eciency
100
80
60
40
20
020406080100
PA Ampli ers
iNUKE NU12000DSP
Ultra-Lightweight, High-Density 12,000-Watt Power Ampli er with DSP Control and USB Interface
Delivers 2 x 6,000 Watts into 2 Ohms,
#
2 x 3,400 Watts into 4 Ohms, 2 x 1,700 Watts into 8 Ohms and weighs less than 26.5 lbs / 12 kg
Ultimate reliability through
#
revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup
Ultra-e cient switch-mode
#
power supply for noise-free audio, superior transient response and low power consumption
High-performance DSP and
#
24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
DSP section features
#
sophisticated delay, crossover (3  lter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings
Front panel LCD display enables
#
setup and adjustment without PC
Can be set up, controlled and
#
monitored via front panel USB connector. Powerful remote software downloadable at behringer.com
Zero-Attack limiters o er
#
maximum output level with reliable overload protection
Built-in Subwoofer/Satellite
#
crossover for perfect subwoofer operation
Detented and illuminated gain
#
controls for precise level setting
Precise 4-segment Signal and Limit
#
LEDs to monitor performance
Our light-as-a feather iNUKE power
amps have been wildly successful,
and we’ve sold truckloads of them all
over the world! Why? Because they
are ultra-dependable, put out massive
amounts of power, yet weigh so very
little thanks to our revolutionary
high-density Class-D technology and
ultra-e cient switch-mode power
supplies. But we think we may have
outdone ourselves with the new
iNUKE NU12000, which packs a whopping 12,000-Watt total output!
Yes, that’s right—a stereo power ampli er with 6,000 Watts output per
channel @ 2Ohms, or 2 x 3,400 Watts @ 4 Ohms—and it weighs less than
26.5 lbs. / 12 kg. This groundbreaking ampli er is also available in a USB-
addressable DSP version, the iNUKE NU12000DSP.
Superb Transient Response
Product Information Document
PA Ampli ers
iNUKE NU12000DSP
Ultra-Lightweight, High-Density 12,000-Watt Power Ampli er with DSP Control and USB Interface
XLR and ¼" TRS combination
#
input connectors for compatibility with any source
Professional twist-lock speaker
#
connectors for ultimate reliability
Independent DC, LF and thermal
#
overload protection on each channel automatically protects ampli er and speakers without shutting down the show
“Back-to-front” ventilation system
#
prevents thermal buildup for reliable operation
Delivered with Neutrik*
#
powerCON 32A* twist-lock connector (cable not included)
High-quality components and
#
exceptionally rugged construction ensure long life warranty
Sublimely Simple Operation
The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal. The rear panel is just as elegant, with combo XLR and ¼ "TRS input connectors making the iNUKE compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. Therear panel is also where you’ll  nd the switches that enable iNUKE amps to work in either dual mono, stereo or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in biamp mode, sending low frequency content to passive subwoofers, while the high frequency output is channeled to fullrange loudspeakers (CH1>100 Hz / CH2<100 Hz orFULLRANGE).
3-Year Warranty Program**
#
Conceived and designed by
#
BEHRINGER Germany
*All third-pa rty tradema rks are the prop erty of their re spective owne rs. Their use ne ither constitut es a claim of the trade mark nor a liation of the tradem ark owners with MU SIC Group. Produc t names are mentio ned solely as a re ference for comp atibility, e ec ts and/or components.
**Warran ty details can b e found at music-grou p.com.
iNUKE DSP
For sound engineers requiring high-level control capability, iNUKE DSP Series ampli ers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSPfunctions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eightparametric, two dynamic), anddynamics processing with
lockable security settings. Aconvenient front panel LCD display allows you to setup and make adjustments directly at the ampli er, without the need for a PC. All iNUKE DSP models can be set up, controlledand monitored via the front panel USB connector.
Value
Sporting massive output ratings, lightweight Class-D technology, an equally lightweight price tag, and all the amenities a professional audio engineer could ask for, BEHRINGERiNUKE ampli ers are serious amps for the most demanding applications.
2 of 4
Loading...
+ 2 hidden pages