Behringer NU1000, NU6000, NU3000 User Manual

PA Ampliers
iNUKE NU6000DSP NU3000DSP/NU1000DSP NU6000/NU3000/NU1000
iNUKE NU6000DSP— Ultra-Lightweight, High-Density 6000-Watt Power Amplier with DSP Control and USB Interface
Delivers 2 x 3000 Watts into 4 Ohms, 2 x 1500 Watts into 8 Ohms and weighs less than 12 lbs / 5.5 kg
iNUKE NU3000DSP— Ultra-Lightweight, High-Density 3000-Watt Power Amplier with DSP Control and USB Interface
Delivers 2 x 1500 Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg
iNUKE NU1000DSP — Ultra-Lightweight, High-Density 1000-Watt Power Amplier with DSP Control and USB Interface
Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg
Common features
iNUKE Series power ampliers pack massive amounts of output power into exceptionally lightweight, rack-mountable packages. Our revolutionary high-density Class-D technology combined with ultra-ecient switch-mode power supplies ensures these feather-light powerhouses will drive your rig eortlessly for many years to come.
Superb transient response
We spent years ne-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, these amps react instantly to even the most demanding electronicbass impulses.
When this amazing amplier technology is combined with our state-of-the-art switching-mode power supplies, these ampliers provide tremendous punch. And because they are so much more ecient than conventional designs, they run cooler and don’t require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.
Sublimely simple operation
The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.
Continued on next page
Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup
Ultra-ecient switch-mode power supply for noise-free audio, superior transient response and low power consumption
High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
DSP section features sophisticated delay, crossover (3 lter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings
Page 2 of 11
iNUKE NU6000DSP NU3000DSP NU1000DSP NU6000 NU3000 NU1000
Front panel LCD display enables setup and adjustment without PC
Can be set up, controlled and monitored via front panel USB connector. Powerful remote software downloadable at behringer.com
“Zero-Attack” limiters oer maximum output level with reliable overload protection
Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
Detented and illuminated gain controls for precise level setting
The rear panel is just as elegant, with combo XLR and ¼" TRS input connectors making the iNUKE compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you’ll nd the switches that enable iNUKE amps to work in either dual mono, stereo or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in biamp mode, sending low frequency content to passive subwoofers, while the high frequency output is channeled to fullrange loudspeakers (CH1>100 Hz / CH2<100 Hz or FULLRANGE).
iNUKE NU6000/NU3000/NU1000
Front Panel
GAIN CONTROLS adjust input level Power button
iNUKE DSP
For sound engineers requiring high-level control capability, iNUKE DSP Series ampliers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplier, without the need for a PC. All iNUKE DSP models can be set up, controlled and monitored via the front panel USB connector.
Continued on next page
Precise 4-segment Signal and Limit LEDs to monitor performance
XLR and ¼'' TRS combination input connectors for compatibility with any source
Professional twist-lock speaker connectors for ultimate reliability
Independent DC, LF and thermal overload protection on each channel automatically protects amplier and speakers without shutting down the show
“Back-to-front” ventilation system prevents thermal buildup for reliable operation
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Rear Panel
Power Connection
TWIST-LOCKING SPEAKER OUTPUTS accept professional speaker cables
MODE switches selects dual-mono, stereo or bridged mono operating modes
INPUTS connect sound source using ¼" TRS / XLR combo jacks
Page 3 of 11
iNUKE NU6000DSP NU3000DSP NU1000DSP NU6000 NU3000 NU1000
iNUKE NU6000— Ultra-Lightweight, High-Density 6000-Watt Power Amplier
Delivers 2 x 3000 Watts into 4 Ohms, 2 x 1500 Watts into 8 Ohms and weighs less than 12 lbs / 5.5 kg
iNUKE NU3000— Ultra-Lightweight, High-Density 3000-Watt Power Amplier
Delivers 2 x 1500 Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7 lbs / 3.3 kg
iNUKE NU1000— Ultra-Lightweight, High-Density 1000-Watt Power Amplier
Value
Sporting massive output ratings, lightweight Class-D technology, an equally lightweight price tag, and
iNUKE NU6000DSP/NU3000DSP/NU1000DSP
Front Panel
DSP LCD panel with
USB socket for laptop control and setup
Rear Panel
parameter controls allows setup without need for computer
GAIN CONTROLS adjust input level
all the amenities a professional audio engineer could ask for, BEHRINGER iNUKE ampliers are serious amps for the most demanding applications.
Power button
Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 7 lbs / 3.3 kg
Common features
Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal build up
Ultra-ecient switch-mode power supply for noise-free audio, superior transient response and low power consumption
“Zero-Attack” limiters oer
maximum output level with reliable overload protection
Power Connection INPUTS connect
TWIST-LOCKING SPEAKER OUTPUTS accept professional speaker cables
sound source using ¼" TRS / XLR combo jacks
iNUKE NU6000DSP
Page 4 of 11
NU3000DSP NU1000DSP NU6000 NU3000 NU1000
Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
Detented and illuminated gain controls for precise level setting
Precise 4-segment Signal and Limit LEDs to monitor performance
XLR and ¼'' TRS combination input connectors for compatibility with any source
Professional twist-lock speaker connectors for ultimate reliability
Independent DC, LF and thermal overload protection on each channel automatically protects amplier and speakers without shutting down the show
System conguration is a breeze thanks to iNUKE’s Amp Remote software
(Available on iNUKE DSP models only)
Dynamic EQ combines the eects of equalization and side-chain compression to compensate for the perceived loudness of specic frequency ranges
(Available on iNUKE DSP models only)
iNUKE’s DSP crossover features 3 lter types (at up to 48 dB/octave) for the ultimate in versatility
(Available on iNUKE DSP models only)
“Back-to-front” ventilation system
prevents thermal buildup for reliable operation
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
8 Parametric EQ lters make it easy to optimize system performance with just a few mouse clicks
(Available on iNUKE DSP models only)
Save and recall frequently-used setups, complete with lockout codes for total system security
(Available on iNUKE DSP models only)
Loading...
+ 7 hidden pages