Confi dential, for internal use only. Not to be reproduced.
Power Ampli ers
iNUKE NU1000/NU3000
NU6000/NU1000DSP
NU3000DSP/NU6000DSP
iNUKE Series Power Ampli ers
NU1000 — Ultra-Lightweight HighDensity 1000-Watt Power Ampli er
Delivers 2 x 500 Watts into
2 Ohms, 2 x 300 Watts into 4 Ohms,
1000 Watts into 4 Ohms bridged and
weighs less than 7 lbs.
NU3000 — Ultra-Lightweight HighDensity 3000-Watt Power Ampli er
Delivers 2 x 1500 Watts into 2 Ohms,
2 x 880 Watts into 4 Ohms,
3000 Watts into 4 Ohms bridged and
weighs less than 7 lbs.
NU6000 — Ultra-Lightweight HighDensity 6000-Watt Power Ampli er
Delivers 2 x 3000 Watts into 4 Ohms,
2 x 1500 Watts into 8 Ohms and
weighs less than 12 lbs.
Common features
Revolutionary High-Density Class-D
technology for ultimate performance
Ultra-e cient switch-mode power
supply for noise-free audio,
superior transient response and
low power consumption
iNUKE Series power ampli ers pack
massive amounts of output power into
exceptionally lightweight, rack-mountable
packages. Our revolutionary high-density
Class-D technology combined with
ultra-e cient switch-mode power
supplies ensures these feather-light
powerhouses will drive your rig
e ortlessly for many years to come.
Superb transient response
We spent years ne-tuning the
high-density Class-D technology that
gives the iNUKE Series its oomph.
By carefully selecting transistors with
extremely high slew rates and optimizing
other proprietary parts of our circuitry,
these amps react instantly to even the
most demanding electronicbass impulses.
When this amazing ampli er
technology is combined with our
state-of-the-art switching-mode power
supplies, these ampli ers provide
tremendous punch. And because they are
so much more e cient than conventional
designs, they run cooler and don’t require
the massive heat sinks and heavy toroid
transformers typically associated with
their conventional counterparts.
Sublimely simple operation
The front panel controls and indicators
provide your system’s vital signs at a
glance. After pressing the Power button,
the Power LED lights to show the amp
is ready for action. All channels feature
positive-detent Gain controls with Signal
LEDs that light when a signal is present,
as well as clip LEDs to indicate when the
signal is distorted and you need to reduce
the input signal.
Continued on next page
Integrated limiters o er maximum
output level with reliable
overload protection
Built-in Subwoofer/Satellite crossover
for more exibility
Detented gain controls for precise
setting and matching of sensitivity
Precise Power, Signal and Limit LEDs
to monitor performance
Combo XLR and ¼ " TRS input
connectors for compatibility with
any source
Professional twist lock
speaker connectors
Confi dential, for internal use only. Not to be reproduced.
Page 2 of 6
iNUKE NU1000
NU3000
NU6000
NU1000DSP
NU3000DSP
NU6000DSP
Independent DC and thermal
overload protection on each channel
automatically protects ampli er and
speakers without shutting down
the show
“Back-to-front” ventilation system
including air lter for
reliable operation
NU1000DSP — Ultra-Lightweight,
High-Density 1000-Watt Power
Ampli er with DSP Control and
USB Interface
Delivers 2 x 500 Watts into 2 Ohms,
2 x 300 Watts into 4 Ohms,
1000 Watts into 4 Ohms bridged
and weighs less than 8 lbs.
NU3000DSP — Ultra-Lightweight,
High-Density 3000-Watt Power
Ampli er with DSP Control and
USB Interface
Delivers 2 x 1500 Watts into 2 Ohms,
2 x 880 Watts into 4 Ohms,
3000 Watts into 4 Ohms bridged
and weighs less than 8 lbs.
The rear panel is just as elegant,
with combo XLR and ¼ " TRS input
connectors making the iNUKE compatible
with virtually any source, balanced or
unbalanced. Professional twist-lock
speaker sockets are provided to ensure
every drop of output power gets to
your loudspeakers. The rear panel is
also where you’ll nd the switches that
enable iNUKE amps to work in either
dual mono, stereo or mono bridge
mode. A built-in CROSSOVER switch
enables the amp to operate in biamp
mode, sending low frequency content
to passive subwoofers, while the high
frequency output is channeled to
fullrange loudspeakers (CH1>100 Hz /
CH2<100 Hz or FULLRANGE). Flick the
LIMITER ON/OFF switch to activate the
built-in overload protection, or turn it o
if you’re feeling lucky.
iNUKE NU1000/NU3000/NU6000
Front Panel
iNUKE DSP
For sound engineers requiring
high-level control capability, iNUKE DSP
Series ampli ers come ready for action
right out-of-the-box. The built-in DSP
and 24-bit/96 kHz converters ensure the
ultimate signal integrity with an extremely
broad dynamic range. DSP functions
include a sophisticated delay for
delay-line loudspeakers, crossover,
EQ (eight parametric, two dynamic),
and dynamics processing with lockable
security settings. A convenient front
panel LCD display allows you to setup
and make adjustments directly at the
ampli er, without the need for a PC.
All iNUKE DSP models can be set up,
controlled and monitored via the front
panel USB connector.
Continued on next page
GAIN
CONTROLS
adjust
input level
Power
button
NU6000DSP — Ultra-Lightweight,
High-Density 6000-Watt Power
Ampli er with DSP Control and
USB Interface
Delivers 2 x 3000 Watts into 4 Ohms,
2 x 1500 Watts into 8 Ohms and
weighs less than 12 lbs.
Common Features:
Ultimate reliability through
revolutionary cool-running
High-Density Class-D technology
with "near-zero" thermal buildup
Ultra-e cient switch-mode power
supply for noise-free audio,
superior transient response and
low power consumption
Rear Panel
Power
Connection
TWIST-LOCKING
SPEAKER
OUTPUTS
accept
professional
speaker cables
MODE switches
selects dualmono, stereo or
bridged mono
operating modes
INPUTS connect
sound source
using ¼" TRS
/ XLR combo
jacks