Behringer iNuke NU1000, iNuke NU6000, iNuke NU3000 User Manual

PA Amplifiers

iNUKE NU6000DSP NU3000DSP/NU1000DSP NU6000/NU3000/NU1000

iNUKE NU6000DSP— Ultra-Lightweight, High-Density 6000-Watt Power Amplifier with DSP Control and USB Interface

Delivers 2 x 3000 Watts into 4 Ohms, 2 x 1500 Watts into 8 Ohms and weighs less than 12 lbs / 5.5 kg

iNUKE NU3000DSP— Ultra-Lightweight, High-Density 3000-Watt Power Amplifier with DSP Control and USB Interface

Delivers 2 x 1500 Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms;

3000 Watts into 4 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg

iNUKE NU1000DSP — Ultra-Lightweight, High-Density 1000-Watt Power Amplifier with DSP Control and USB Interface

Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms;

1000 Watts into 4 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg

Common features

Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup

Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption

High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range

DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric,

2 dynamic), dynamics processing and lockable security settings

iNUKE Series power amplifiers pack massive amounts of output power into exceptionally

lightweight, rack-mountable packages. Our revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these feather-light powerhouses will drive your rig effortlessly for many

years to come.

Superb transient response

We spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph.

By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, these amps react instantly to even the most demanding electronicbass impulses.

When this amazing amplifier technology is combined with our state-of-the-art switching-mode power supplies, these amplifiers provide tremendous punch. And because they are so much more efficient than conventional designs, they run cooler and don’t require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.

Sublimely simple operation

The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp

is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.

Continued on next page

iNUKE NU6000DSP NU3000DSP NU1000DSP NU6000

NU3000

NU1000

Front panel LCD display enables setup and adjustment without PC

Can be set up, controlled and monitored via front panel USB connector. Powerful remote software downloadable at behringer.com

“Zero-Attack” limiters offer maximum output level with reliable overload protection

Built-in Subwoofer/Satellite crossover for perfect subwoofer operation

Detented and illuminated gain controls for precise level setting

Precise 4-segment Signal and Limit LEDs to monitor performance

XLR and 1/4'' TRS combination input connectors for compatibility with any source

Professional twist-lock speaker connectors for ultimate reliability

Independent DC, LF and thermal overload protection on each channel automatically protects amplifier

and speakers without shutting down the show

“Back-to-front” ventilation system prevents thermal buildup for reliable operation

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by

BEHRINGER Germany

Page 2 of 11

The rear panel is just as elegant, with combo XLR and 1/4" TRS input

connectors making the iNUKE compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to

your loudspeakers. The rear panel is also where you’ll find the switches that enable iNUKE amps to work in either dual mono, stereo or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in biamp mode, sending low frequency content to passive subwoofers, while the high frequency output is channeled to fullrange loudspeakers (CH1>100 Hz / CH2<100 Hz or FULLRANGE).

iNUKE NU6000/NU3000/NU1000 Front Panel

iNUKE DSP

For sound engineers requiring high-level control capability, iNUKE DSP Series amplifiers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover,

EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. All iNUKE DSP models can be set up, controlled and monitored via the front panel USB connector.

Continued on next page

GAIN CONTROLS
adjust input level	Power button

Rear Panel

Power Connection

TWIST-LOCKING

MODE switches selects

INPUTS connect

SPEAKER OUTPUTS

dual-mono, stereo

sound source using

accept professional

or bridged mono

¼" TRS / XLR

speaker cables

operating modes

combo jacks

iNUKE NU6000DSP NU3000DSP NU1000DSP NU6000

NU3000

NU1000

iNUKE NU6000— Ultra-Lightweight, High-Density 6000-Watt Power Amplifier

Delivers 2 x 3000 Watts into 4 Ohms, 2 x 1500 Watts into 8 Ohms and weighs less than 12 lbs / 5.5 kg

iNUKE NU3000— Ultra-Lightweight, High-Density 3000-Watt Power Amplifier

Delivers 2 x 1500 Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms;

3000 Watts into 4 Ohms

(bridge mode) and weighs less than 7 lbs / 3.3 kg

iNUKE NU1000— Ultra-Lightweight, High-Density 1000-Watt Power Amplifier

Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms;

1000 Watts into 4 Ohms

(bridge mode) and weighs less than 7 lbs / 3.3 kg

Common features

Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal build up

Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption

“Zero-Attack” limiters offer maximum output level with reliable overload protection

Value

Sporting massive output ratings, lightweight Class-D technology,

an equally lightweight price tag, and

Page 3 of 11

all the amenities a professional audio engineer could ask for, BEHRINGER iNUKE amplifiers are serious amps for the most demanding applications.

iNUKE NU6000DSP/NU3000DSP/NU1000DSP

Front Panel

	DSP LCD panel with
	parameter controls
USB socket for laptop	allows setup without
control and setup	need for computer	Power button

GAIN CONTROLS adjust input level

Rear Panel







Power Connection	TWIST-LOCKING	INPUTS connect
	SPEAKER OUTPUTS	sound source
	accept professional	using ¼" TRS / XLR
	speaker cables	combo jacks

iNUKE NU6000DSP NU3000DSP NU1000DSP NU6000

NU3000

NU1000

Built-in Subwoofer/Satellite crossover for perfect subwoofer operation

Detented and illuminated gain controls for precise level setting

Precise 4-segment Signal and Limit LEDs to monitor performance

XLR and 1/4'' TRS combination input connectors for compatibility with any source

Professional twist-lock speaker connectors for ultimate reliability

Independent DC, LF and thermal overload protection on each channel automatically protects amplifier

and speakers without shutting down the show

“Back-to-front” ventilation system prevents thermal buildup for reliable operation

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by

BEHRINGER Germany

Page 4 of 11

System configuration is a breeze thanks to iNUKE’s Amp Remote software